OpenCore EFI for running macOS on the Lenovo E14 Gen 5 with an AMD Ryzen 7 CPU. Tested with macOS Sequoia and Tahoe.
| Component | Details |
|---|---|
| Variant | 21JR002WGE |
| CPU | AMD Ryzen 7 7730U (8 Cores/16 Threads) |
| iGPU | AMD Radeon RX Vega 8 (4000/5000) |
| RAM | 16 GB DDR4 SDRAM, PC4-25600, 3200 MHz |
| Storage | 1 TB NVMe (Western Digital PC SN740) |
| WIFI/BT | Intel® Wi-Fi 6E AX210* WiFi Fw: iwlwifi-ty-a0-gf-a0-68.ucode + iwlwifi-ty-a0-gf-a0.pnvm BT Fw: ibt-0041-0041.sfi + ibt-0041-0041.ddc |
Note
*In stock configuration, this laptop variant comes with a MediaTek Wi-Fi 6 MT7921 card which is incompatible with macOS. So if you need Wi-Fi and Bluetooth, either upgrade your WiFi card or use a compatible USB WiFi dongle.
- AMD CPU Power Management → install AMD Power Gadget to adjust CPU behavior
- AMD Radeon Graphics 2GB (via NootedRed kext)
- Audio*
- HDMI Port
- USB Port Mapping
- Brightness and Volume controls via keyboard shortcuts
- WiFi (via after-market WiFi/BT Card)
- Slimed Intel Wifi and BT kexts to reduce overall EFI size
Note
When running macOS Tahoe, analog audio does not work out of the box. In this case, install VoodooHDA-Tahoe or apply root patches with OCLP Mod in Post-Install.
- Correct CPU name displayed in “About this Mac…”
- GoldenGate Extended icons by HJebbour
- Stock WiFi and Bluetooth: MediaTek Wi-Fi 6 MT7921 → incompatible. Alternative: USB WiFi Dongle (TL-WN725N) with Chris1111’s Wireless USB Big Sur Adapter or ugrade the internal WiFi/BT Card
- Biometrics: Goodix fingerprint sensor and Windows Hello facial recognition
- Enable proper Sleep/Hibernation
Change the following settings to install/run macOS:
- Config > Display > UMA Frame buffer Size: 2G
- Security > Secure Boot > Off
Before installing macOS, prepare your OpenCore EFI and configure it:
- Download the EFI folder from the Releases section
- Unzip it
- Open
config.plistwith OCAT or your preferred plist editor - Adjust the following:
Kernel/Add: If your System doesn’t use an Intel WiFi card, disable the Wifi and Bluetooth kexts, namely: itlwm, IntelBTPatcher, IntelBluetoothFirmware, BlueToolFixupKernel/Patch: If your E14 uses a difffernet CPU, adjust the Core Count (see AMD-Vanilla Guide)PlatformInfo/Generic: Generate Serial, ROM, MLB, etc.
- Save the
config.plist
Important
When performing a first-time macOS installation or a clean/fresh install, make sure NootedRed.kext is disabled. If it remains enabled, the installer will hang at a later stage — specifically when the Setup Assistant appears to create a user account and complete initial configuration.
Once your EFI is ready:
- Put the EFI folder at the root of a FAT32-formatted USB flash drive. You can boot OpenCore from it
- To create a macOS USB installer, follow Dortania’s OpenCore Install Guide
Required for root patches and to run Chris1111’s WiFi USB tool:
sudo spctl --master-disableImportant
In macOS Sequoia+, confirm changes in System Settings → Gatekeeper → “Allow apps from Everywhere”
Download, install and run Heliport App to be able to connect to Wi-Fi Access Points.
Install AMD Power Gadget to monitor and adjust CPU power management
| Componet | Score (Windows) | Score (macOS) |
|---|---|---|
| CPU | Single-Core: 1923 Multi-Core: 5966 |
Single-Core: 1567 Multi-Core: 5729 |
| GPU | Vulkan: 12659 OpenCL: 14608 |
Metal: 18697 OpenCL: 15415 |
Lenovo Driver and Software Matrix
- Based on op2025-ra; EFI cleaned and updated for current kexts, icons, and settings, plus macOS Tahoe support
- AMD_Vanilla – binary kernel patches for AMD CPUs
- ChefKissInc for NootedRed
- Fabiosun for helpful guidance
- Chris1111 fpr VoodooHDA-Tahoe
