diff --git a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx index 1e23e49bde..d4e8e0c0f5 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx @@ -5123,13 +5123,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5141,6 +5141,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx index 13c6a7b3bf..a6b46524c3 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx @@ -5120,13 +5120,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5138,6 +5138,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx index e0a3ff7f8e..d893e047fb 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx @@ -5123,13 +5123,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5141,6 +5141,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx index c7bac85efb..a48278b928 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx @@ -5123,13 +5123,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5141,6 +5141,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx index 680e3d5be4..7400edeada 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx @@ -5222,13 +5222,13 @@ Vuoi avviare la scansione? Il nome non deve contenere ";" e non deve essere una porta o un intervallo di porte. - Per questo profilo non è stato trovato un profilo porte, verranno usate le porte salvate con il profilo. I profili porte vengono salvati nelle impostazioni e il profilo fa riferimento ad essi tramite un ID interno: se il file del profilo è stato condiviso da un altro computer, crea il profilo porte e quindi selezionalo nuovamente nel profilo (modifica il profilo). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Prima della scansione esegui il ping degli host - Vengono scansionati solo gli host che rispondono a un ping (eco ICMP, con timeout e tentativi sopra). Più veloce per intervalli con molti indirizzi IP non usati. Non vengono scansionati gli host che bloccano ICMP (ad esempio Windows con il firewall abilitato). + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host non hanno risposto al ping e non sono stati scansionati. @@ -5240,6 +5240,15 @@ Vuoi avviare la scansione? Il nome non deve contenere ";". - Per questo profilo non è stato trovato un server DNS, verranno usati i server DNS salvati con il profilo. I server DNS vengono salvati nelle impostazioni e il profilo fa riferimento ad essi tramite un ID interno: se il file del profilo è stato condiviso da un altro computer, crea il server DNS e quindi selezionalo nuovamente nel profilo (modifica il profilo). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx index f3f1f225bc..e52a13c349 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx @@ -5123,13 +5123,13 @@ Cloudflareは、お客様のIPアドレスおよびネットワーク情報を The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5141,6 +5141,15 @@ Cloudflareは、お客様のIPアドレスおよびネットワーク情報を The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx index 832b1cf8b6..87fb4e27a2 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx @@ -5120,13 +5120,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5138,6 +5138,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx index a117609872..ba97fb394b 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx @@ -5123,13 +5123,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5141,6 +5141,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx index ab0f888535..04b823e3dc 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx @@ -5120,13 +5120,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5138,6 +5138,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx index 57aec228dd..721ba27ab4 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx @@ -5120,13 +5120,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5138,6 +5138,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx b/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx index 1b43b2bf07..49fc7ca1dc 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx @@ -5123,13 +5123,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5141,6 +5141,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx index 5b71033581..4d33c80b5c 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx @@ -5123,13 +5123,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5141,6 +5141,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx index 57c809f367..db1eeb4673 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx @@ -5113,13 +5113,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5131,6 +5131,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx index 2d0802e419..47f7238140 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx @@ -5120,13 +5120,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5138,6 +5138,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx index 6debbf3a50..801ac734f1 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx @@ -5124,13 +5124,13 @@ Do you want to start the scan? The name must not contain ";" and must not be a port or port range. - A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). Ping hosts before the scan - Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. {0} host(s) did not answer the ping and were not scanned. @@ -5142,6 +5142,15 @@ Do you want to start the scan? The name must not contain ";". - A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses. diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx index 115b093efa..b8a4969b9d 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx @@ -5123,13 +5123,13 @@ Cloudflare 可能會記錄您的 IP 位址與網路資訊。詳情請參閱 Clou 名稱不可包含「;」，且不能是連接埠或連接埠範圍。 - 找不到此設定檔對應的連接埠配置；系統將使用與該設定檔關聯的連線。連接埠配置儲存在設定中，並由設定檔透過內部 ID 來參照。若從其他電腦傳輸了該設定檔，請先建立對應的連接埠配置，再於該設定檔中重新選取（編輯該設定）。 + A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it). 在掃描前先進行 Ping - 僅對有回應 Ping（ICMP 回應，採用上述逾時與次數設定）的主機進行掃描。此方式能加快包含大量閒置 IP 的範圍掃描速度。若主機封鎖了 ICMP（例如：開啟防火牆的 Windows 系統），則不會被掃描到。 + Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. 有{0}個主機未回應 ping，未進行掃量。 @@ -5141,6 +5141,15 @@ Cloudflare 可能會記錄您的 IP 位址與網路資訊。詳情請參閱 Clou 名稱不可包含「;」。 - 找不到此設定檔對應的 DNS 伺服器，將使用與該設定檔關聯的 DNS 伺服器。DNS 伺服器儲存在設定中，並由設定檔透過內部 ID 來參照。若從其他電腦傳送了該設定檔，請先建立 DNS 伺服器，再於該設定中重新選取（編輯該設定）。 + A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it). + + + Firewall + + + PTR records can only be looked up for IP addresses, "{0}" is skipped. + + + PTR records can only be looked up for IP addresses.