Dependency (transifex/language): Updates for project NETworkManager

Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx

@@ -5123,13 +5123,13 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";" and must not be a port or port range.</value>
   </data>
   <data name="PortProfileOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile).</value>
+    <value>A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it).</value>
   </data>
   <data name="PingHostsBeforeScan" xml:space="preserve">
     <value>Ping hosts before the scan</value>
   </data>
   <data name="HelpMessage_PingHostsBeforeScan" xml:space="preserve">
-    <value>Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
+    <value>Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
   </data>
   <data name="XHostsDidNotAnswerThePingAndWereNotScanned" xml:space="preserve">
     <value>{0} host(s) did not answer the ping and were not scanned.</value>
@@ -5141,6 +5141,15 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";".</value>
   </data>
   <data name="DNSServerOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile).</value>
+    <value>A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it).</value>
+  </data>
+  <data name="ApplicationName_Firewall" xml:space="preserve">
+    <value>Firewall</value>
+  </data>
+  <data name="PTRRequiresIPAddressX" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses, "{0}" is skipped.</value>
+  </data>
+  <data name="ErrorMessage_PTRRequiresIPAddresses" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses.</value>
   </data>
 </root>

Source/NETworkManager.Localization/Resources/Strings.es-ES.resx

@@ -5120,13 +5120,13 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";" and must not be a port or port range.</value>
   </data>
   <data name="PortProfileOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile).</value>
+    <value>A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it).</value>
   </data>
   <data name="PingHostsBeforeScan" xml:space="preserve">
     <value>Ping hosts before the scan</value>
   </data>
   <data name="HelpMessage_PingHostsBeforeScan" xml:space="preserve">
-    <value>Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
+    <value>Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
   </data>
   <data name="XHostsDidNotAnswerThePingAndWereNotScanned" xml:space="preserve">
     <value>{0} host(s) did not answer the ping and were not scanned.</value>
@@ -5138,6 +5138,15 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";".</value>
   </data>
   <data name="DNSServerOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile).</value>
+    <value>A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it).</value>
+  </data>
+  <data name="ApplicationName_Firewall" xml:space="preserve">
+    <value>Firewall</value>
+  </data>
+  <data name="PTRRequiresIPAddressX" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses, "{0}" is skipped.</value>
+  </data>
+  <data name="ErrorMessage_PTRRequiresIPAddresses" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses.</value>
   </data>
 </root>

Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx

@@ -5123,13 +5123,13 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";" and must not be a port or port range.</value>
   </data>
   <data name="PortProfileOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile).</value>
+    <value>A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it).</value>
   </data>
   <data name="PingHostsBeforeScan" xml:space="preserve">
     <value>Ping hosts before the scan</value>
   </data>
   <data name="HelpMessage_PingHostsBeforeScan" xml:space="preserve">
-    <value>Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
+    <value>Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
   </data>
   <data name="XHostsDidNotAnswerThePingAndWereNotScanned" xml:space="preserve">
     <value>{0} host(s) did not answer the ping and were not scanned.</value>
@@ -5141,6 +5141,15 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";".</value>
   </data>
   <data name="DNSServerOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile).</value>
+    <value>A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it).</value>
+  </data>
+  <data name="ApplicationName_Firewall" xml:space="preserve">
+    <value>Firewall</value>
+  </data>
+  <data name="PTRRequiresIPAddressX" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses, "{0}" is skipped.</value>
+  </data>
+  <data name="ErrorMessage_PTRRequiresIPAddresses" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses.</value>
   </data>
 </root>

Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx

@@ -5123,13 +5123,13 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";" and must not be a port or port range.</value>
   </data>
   <data name="PortProfileOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile).</value>
+    <value>A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it).</value>
   </data>
   <data name="PingHostsBeforeScan" xml:space="preserve">
     <value>Ping hosts before the scan</value>
   </data>
   <data name="HelpMessage_PingHostsBeforeScan" xml:space="preserve">
-    <value>Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
+    <value>Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
   </data>
   <data name="XHostsDidNotAnswerThePingAndWereNotScanned" xml:space="preserve">
     <value>{0} host(s) did not answer the ping and were not scanned.</value>
@@ -5141,6 +5141,15 @@ Do you want to start the scan?</value>
     <value>The name must not contain ";".</value>
   </data>
   <data name="DNSServerOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile).</value>
+    <value>A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it).</value>
+  </data>
+  <data name="ApplicationName_Firewall" xml:space="preserve">
+    <value>Firewall</value>
+  </data>
+  <data name="PTRRequiresIPAddressX" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses, "{0}" is skipped.</value>
+  </data>
+  <data name="ErrorMessage_PTRRequiresIPAddresses" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses.</value>
   </data>
 </root>

Source/NETworkManager.Localization/Resources/Strings.it-IT.resx

@@ -5222,13 +5222,13 @@ Vuoi avviare la scansione?</value>
     <value>Il nome non deve contenere ";" e non deve essere una porta o un intervallo di porte.</value>
   </data>
   <data name="PortProfileOfProfileNotFoundMessage" xml:space="preserve">
-    <value>Per questo profilo non è stato trovato un profilo porte, verranno usate le porte salvate con il profilo. I profili porte vengono salvati nelle impostazioni e il profilo fa riferimento ad essi tramite un ID interno: se il file del profilo è stato condiviso da un altro computer, crea il profilo porte e quindi selezionalo nuovamente nel profilo (modifica il profilo).</value>
+    <value>A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it).</value>
   </data>
   <data name="PingHostsBeforeScan" xml:space="preserve">
     <value>Prima della scansione esegui il ping degli host</value>
   </data>
   <data name="HelpMessage_PingHostsBeforeScan" xml:space="preserve">
-    <value>Vengono scansionati solo gli host che rispondono a un ping (eco ICMP, con timeout e tentativi sopra). Più veloce per intervalli con molti indirizzi IP non usati. Non vengono scansionati gli host che bloccano ICMP (ad esempio Windows con il firewall abilitato).</value>
+    <value>Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
   </data>
   <data name="XHostsDidNotAnswerThePingAndWereNotScanned" xml:space="preserve">
     <value>{0} host non hanno risposto al ping e non sono stati scansionati.</value>
@@ -5240,6 +5240,15 @@ Vuoi avviare la scansione?</value>
     <value>Il nome non deve contenere ";".</value>
   </data>
   <data name="DNSServerOfProfileNotFoundMessage" xml:space="preserve">
-    <value>Per questo profilo non è stato trovato un server DNS, verranno usati i server DNS salvati con il profilo. I server DNS vengono salvati nelle impostazioni e il profilo fa riferimento ad essi tramite un ID interno: se il file del profilo è stato condiviso da un altro computer, crea il server DNS e quindi selezionalo nuovamente nel profilo (modifica il profilo).</value>
+    <value>A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it).</value>
+  </data>
+  <data name="ApplicationName_Firewall" xml:space="preserve">
+    <value>Firewall</value>
+  </data>
+  <data name="PTRRequiresIPAddressX" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses, "{0}" is skipped.</value>
+  </data>
+  <data name="ErrorMessage_PTRRequiresIPAddresses" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses.</value>
   </data>
 </root>

Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx

@@ -5123,13 +5123,13 @@ Cloudflareは、お客様のIPアドレスおよびネットワーク情報を
     <value>The name must not contain ";" and must not be a port or port range.</value>
   </data>
   <data name="PortProfileOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile).</value>
+    <value>A port profile of this profile or its group was not found, the ports saved with the profile or group are used. Port profiles are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile or group again (edit it).</value>
   </data>
   <data name="PingHostsBeforeScan" xml:space="preserve">
     <value>Ping hosts before the scan</value>
   </data>
   <data name="HelpMessage_PingHostsBeforeScan" xml:space="preserve">
-    <value>Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
+    <value>Only hosts that answer a ping (ICMP echo, with the attempts, timeout and buffer below) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned.</value>
   </data>
   <data name="XHostsDidNotAnswerThePingAndWereNotScanned" xml:space="preserve">
     <value>{0} host(s) did not answer the ping and were not scanned.</value>
@@ -5141,6 +5141,15 @@ Cloudflareは、お客様のIPアドレスおよびネットワーク情報を
     <value>The name must not contain ";".</value>
   </data>
   <data name="DNSServerOfProfileNotFoundMessage" xml:space="preserve">
-    <value>A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile).</value>
+    <value>A DNS server of this profile or its group was not found, the DNS servers saved with the profile or group are used. DNS servers are saved in the settings and the profile or group refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile or group again (edit it).</value>
+  </data>
+  <data name="ApplicationName_Firewall" xml:space="preserve">
+    <value>Firewall</value>
+  </data>
+  <data name="PTRRequiresIPAddressX" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses, "{0}" is skipped.</value>
+  </data>
+  <data name="ErrorMessage_PTRRequiresIPAddresses" xml:space="preserve">
+    <value>PTR records can only be looked up for IP addresses.</value>
   </data>
 </root>