esphome-tailscale/example.yaml at main · Csontikka/esphome-tailscale · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
esphome:
  name: esp32-tailscale
  friendly_name: "ESP32 Tailscale"

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

# Pull the tailscale component + all entities from the GitHub package.
# This is exactly what an end user would do — guarantees the build output
# matches what users get when they include the package. `refresh: always`
# disables the default 1-day cache so dev flashes always see the latest main.
packages:
  tailscale:
    url: https://github.com/Csontikka/esphome-tailscale
    ref: main
    refresh: always
    files:
      - packages/tailscale/tailscale.yaml

# PSRAM init — uncomment the block matching your hardware (the
# `esp32-s3-devkitc-1` board defaults configure octal/80MHz, which works
# only on N8R8 / N16R8 modules — quad-PSRAM N8R2 / N16R2 boards need an
# explicit override). Note: ESPHome's `psram:` block forces the configured
# mode, it does NOT auto-detect; the octal block does NOT work on quad
# hardware and vice versa. See README → Troubleshooting → "Device Memory
# shows Internal RAM" if PSRAM detection seems wrong.
#
# For N8R8 / N16R8 modules (8 MB Octal PSRAM, most common):
# psram:
#   mode: octal
#   speed: 80MHz
#
# For N8R2 / N16R2 modules (2 MB Quad PSRAM):
# psram:
#   mode: quad
#   speed: 40MHz

tailscale:
  auth_key: !secret tailscale_auth_key
  hostname: "esp32-tailscale"
  # max_peers: 16  # Optional, default 16
  # login_server: "http://192.168.1.42:8080"  # Optional, for Headscale / self-hosted control plane
  #                                           # See contrib/headscale-test/ for a local docker-compose

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  # use_address: "100.x.x.x"  # Set to your Tailscale VPN IP after first boot

# --- Ethernet instead of WiFi? ---
# The tailscale component works over Ethernet too — it only needs *some*
# network, not WiFi specifically. On a wired board (e.g. Waveshare
# ESP32-S3-ETH, or any LAN8720 / W5500 design), DELETE the `wifi:` block
# above and use an `ethernet:` block instead. Pin `use_address` here, not
# under wifi. Adjust pins to match your board.
#
# ethernet:
#   type: W5500            # or LAN8720, etc.
#   clk_pin: GPIO13
#   mosi_pin: GPIO11
#   miso_pin: GPIO12
#   cs_pin: GPIO14
#   interrupt_pin: GPIO10
#   reset_pin: GPIO9
#   # use_address: "100.x.x.x"  # Set to your Tailscale VPN IP after first boot

logger:
  level: DEBUG
  hardware_uart: UART0

api:

web_server:
  port: 80

ota:
  platform: esphome