Профили Creator 3 Pro: start/pause владельца, end-заглушка.

Co-authored-by: Cursor <cursoragent@cursor.com>

Author: HellEvro

README.md

@@ -181,13 +181,19 @@ The converter does **not** insert T0/T1 — toolchange comes from the Orca profi
 
 ## Optional: Creator 3 Pro machine G-code
 
-Under [`gcode/creator3pro/`](gcode/creator3pro/) there are **optional** start / end / toolchange templates for Flashforge Creator 3 Pro.
+Under [`profiles/creator3pro/`](profiles/creator3pro/) there are **optional** Orca machine G-code snippets for Flashforge Creator 3 Pro:
+
+| File | Use in Orca |
+|------|-------------|
+| [`machine_start.gcode`](profiles/creator3pro/machine_start.gcode) | Machine start |
+| [`machine_end.gcode`](profiles/creator3pro/machine_end.gcode) | Machine end (**placeholder** — owner’s end paste matched start; review / replace) |
+| [`machine_pause.gcode`](profiles/creator3pro/machine_pause.gcode) | Print pause (`; pause print` + `M2000`) |
 
 - Not official Flashforge; not endorsed by the manufacturer.
-- Community-inspired starting points — **adapt** for your firmware and Orca placeholders.
+- Start and pause come from the printer owner; adapt placeholders if your Orca version differs.
 - Machine G-code does **not** replace this converter: you still need the post-processing script for the `.gx` header + thumbnail.
 
-See [`gcode/creator3pro/README.md`](gcode/creator3pro/README.md).
+See [`profiles/creator3pro/README.md`](profiles/creator3pro/README.md).
 
 ## Tests
 

README.ru.md

@@ -181,13 +181,19 @@ python scripts/calibrate_header.py /path/to/our.gx /path/to/flashprint_sample.gx
 
 ## Опционально: machine G-code для Creator 3 Pro
 
-В [`gcode/creator3pro/`](gcode/creator3pro/) лежат **опциональные** шаблоны start / end / toolchange для Flashforge Creator 3 Pro.
+В [`profiles/creator3pro/`](profiles/creator3pro/) — **опциональные** сниппеты machine G-code Orca для Flashforge Creator 3 Pro:
+
+| Файл | Поле в Orca |
+|------|-------------|
+| [`machine_start.gcode`](profiles/creator3pro/machine_start.gcode) | Стартовый G-код |
+| [`machine_end.gcode`](profiles/creator3pro/machine_end.gcode) | Завершающий G-код (**заглушка** — вставка «end» совпала со start; проверьте / замените) |
+| [`machine_pause.gcode`](profiles/creator3pro/machine_pause.gcode) | G-код паузы печати (`; pause print` + `M2000`) |
 
 - Не официальные материалы Flashforge; без endorsement производителя.
-- Community-шаблоны — **адаптируйте** под прошивку и плейсхолдеры Orca.
+- Start и pause — от владельца принтера; при другой версии Orca проверьте плейсхолдеры.
 - Machine G-code **не** заменяет конвертер: post-processing script для шапки `.gx` + эскиза всё равно нужен.
 
-См. [`gcode/creator3pro/README.md`](gcode/creator3pro/README.md).
+См. [`profiles/creator3pro/README.md`](profiles/creator3pro/README.md).
 
 ## Тесты
 

docs/AGENT_HANDOFF.md

@@ -26,7 +26,7 @@ Post-process для Orca: G-code → Flashforge `.gx` (шапка + BMP 80×60).
 |--------|-----|
 | Done | профили `src/gcode_to_gx/printers/`; CLI `--printer` / `GCODE_TO_GX_PRINTER`; auto-detect |
 | Done | README EN + `README.ru.md` (language switch); CI `build-binaries.yml` |
-| Done | опц. шаблоны `gcode/creator3pro/` (start/end/toolchange; не official FF) |
+| Done | опц. Orca G-code `profiles/creator3pro/` (start владельца, pause M2000, end-заглушка) |
 | Done | local Windows `dist/gcode_to_gx.exe`; Mac/Linux — через CI (`macos-arm64`) |
 | Open | проверка на железе; эталон FlashPrint |
 | Note | Cursor `GITHUB_TOKEN` без createRepo; push через git-credential |
@@ -50,7 +50,7 @@ Post-process для Orca: G-code → Flashforge `.gx` (шапка + BMP 80×60).
 |------|-----|
 | Ядро | `src/gcode_to_gx/` |
 | Профили | `src/gcode_to_gx/printers/` |
-| Опц. G-code | `gcode/creator3pro/` |
+| Опц. G-code | `profiles/creator3pro/` |
 | Сборка | `scripts/build_exe.py` |
 | CI | `.github/workflows/build-binaries.yml` |
 | Калибровка | `scripts/calibrate_header.py` |
@@ -63,7 +63,7 @@ Post-process для Orca: G-code → Flashforge `.gx` (шапка + BMP 80×60).
 - Не вставлять T0/T1 в конвертере — профиль Orca.
 - Orca путь — последний argv; флаги до пути.
 - PyInstaller не кросс-компилирует; Mac/Linux из CI.
-- Machine G-code ≠ `.gx` header; шаблоны C3Pro — optional, adapt firmware.
+- Machine G-code ≠ `.gx` header; C3Pro end — placeholder until owner supplies real end.
 
 ---
 

docs/DEVLOG.md

@@ -5,7 +5,7 @@
 ## 2026-09-25
 
 - Docs: `README.md` (EN) + `README.ru.md` (RU), language switch; generic paths.
-- Опц. шаблоны machine G-code: `gcode/creator3pro/` (start/end/toolchange; community-inspired, не official FF).
+- Опц. Orca G-code владельца: `profiles/creator3pro/` (start, pause `M2000`, end-заглушка; удалён выдуманный `gcode/`).
 - Профили принтеров (`adventurer3/4/5m`, `creator3pro`, `generic_single/dual`); CLI `--printer` / env `GCODE_TO_GX_PRINTER`; auto-detect.
 - CI `build-binaries.yml` (win / macos-arm64 / linux); 11 pytest OK; Windows exe локально.
 

gcode/creator3pro/README.md

@@ -0,0 +1,23 @@
+# Optional Orca machine G-code — Flashforge Creator 3 Pro
+
+**Optional.** Paste into Orca printer custom G-code fields. Not official Flashforge
+firmware or documentation; not endorsed by Flashforge. Adapt placeholders to your
+Orca version and firmware.
+
+These files do **not** replace the G-code→`.gx` post-processing converter in this repo.
+You still need the binary / script in **Post-processing scripts**.
+
+## Files
+
+| File | Orca field (RU UI ≈) |
+|------|----------------------|
+| [`machine_start.gcode`](machine_start.gcode) | Machine start G-code / стартовый G-код |
+| [`machine_end.gcode`](machine_end.gcode) | Machine end G-code / завершающий G-код |
+| [`machine_pause.gcode`](machine_pause.gcode) | Print pause G-code / G-код паузы печати |
+
+## Notes
+
+- **Start** — provided by the printer owner (Creator 3 Pro); use as-is in Orca, then tune.
+- **End** — owner’s “end” paste was identical to start. `machine_end.gcode` is a **short
+  cooling/present placeholder** until a real end snippet is supplied. **Review before use.**
+- **Pause** — from owner’s Orca UI: `; pause print` + `M2000`.

gcode/creator3pro/end.gcode

@@ -0,0 +1,12 @@
+; =============================================================================
+; PLACEHOLDER — machine end G-code for Creator 3 Pro
+; The owner’s paste for “end” matched start; real end G-code still needed.
+; Replace this file with your working FlashPrint/Orca end snippet when available.
+; =============================================================================
+M104 S0 ; nozzle off
+M140 S0 ; bed off
+G91
+G1 Z10 F600 ; raise a bit (relative)
+G90
+G28 X Y ; home X/Y (present / park — tune for your firmware)
+M84 ; disable steppers