fix(pcapng)!: default the IDB snaplen to 0 and reject values the field cannot hold (#2278)

_make_block_idb defaulted snaplen to 2**64 - 1, which the 32-bit SnapLen
field truncates to 0xFFFFFFFF, so the made info disagreed with its octets;
any explicit value outside 32 bits was truncated the same way.

Default to 0 (no limit, per the PCAP-NG spec and the schema's own default)
and raise ProtocolError for a snaplen outside 0..0xFFFFFFFF. Breaking: a
make() without snaplen writes 0. Changelog entry added, CHANGELOG.md
regenerated.

Test: the default writes and reports 0, made info equals the parsed info
for in-range values, and out-of-range values raise.

Author: JarryShaw

CHANGELOG.md

@@ -350,6 +350,7 @@ This resolves [#548](https://github.com/JarryShaw/PyPCAPKit/issues/548), which r
 - message text: the `epb_flags` and `pack_flags` length errors say `expected 4`, the length they check, rather than `expected 8` ([#2168](https://github.com/JarryShaw/PyPCAPKit/issues/2168), [#2179](https://github.com/JarryShaw/PyPCAPKit/pull/2179)), and the IPv4 TS option's unknown-flag warning and the Mobility Header's prefix error spell `timestamp` and `mobile` ([#2171](https://github.com/JarryShaw/PyPCAPKit/issues/2171), [#2189](https://github.com/JarryShaw/PyPCAPKit/pull/2189)).
 - IPX dissects its payload from a registry of its own, `IPX.__proto__`, keyed by IPX Packet Type, where it looked the Packet Type up as an IP protocol number, so a type 17 (NCP) payload parsed as `IPX:UDP` and type 4 as `IPX:IPv4`. No IPX-native protocol ships, so the payload is `Raw` unless one is registered ([#2169](https://github.com/JarryShaw/PyPCAPKit/issues/2169), [#2187](https://github.com/JarryShaw/PyPCAPKit/pull/2187)).
 - HIP's `ECHO_RESPONSE_UNSIGNED` maker builds an `EchoResponseUnsignedParameter` schema, where it built the request's; the octets were already right ([#2170](https://github.com/JarryShaw/PyPCAPKit/issues/2170), [#2188](https://github.com/JarryShaw/PyPCAPKit/pull/2188)).
+- **a breaking change to** PCAP-NG's Interface Description Block maker: `snaplen` defaults to 0, which the PCAP-NG specification reads as no limit, where its default of `2**64 - 1` was truncated to `0xFFFFFFFF` by the 32-bit SnapLen field and the made `info` disagreed with the octets. A block made without `snaplen` writes 0 there, and a `snaplen` outside `0` to `0xFFFFFFFF` raises `ProtocolError` where it was truncated silently ([#2278](https://github.com/JarryShaw/PyPCAPKit/issues/2278)).
 
 ### pcapkit.toolkit
 

docs/source/changelog/1.5.0.rst

@@ -2755,6 +2755,12 @@ Fixed
 * HIP's ``ECHO_RESPONSE_UNSIGNED`` maker builds an ``EchoResponseUnsignedParameter``
   schema, where it built the request's; the octets were already right (:issue:`2170`,
   :pr:`2188`).
+* **a breaking change to** PCAP-NG's Interface Description Block maker: ``snaplen``
+  defaults to 0, which the PCAP-NG specification reads as no limit, where its default of
+  ``2**64 - 1`` was truncated to ``0xFFFFFFFF`` by the 32-bit SnapLen field and the made
+  ``info`` disagreed with the octets. A block made without ``snaplen`` writes 0 there,
+  and a ``snaplen`` outside ``0`` to ``0xFFFFFFFF`` raises :exc:`.ProtocolError` where it
+  was truncated silently (:issue:`2278`).
 
 pcapkit.toolkit
 ---------------

pcapkit/protocols/misc/pcapng.py

@@ -4478,7 +4478,7 @@ def _make_block_idb(self, block: 'Optional[Data_InterfaceDescriptionBlock]' = No
                         linktype_default: 'Optional[int]' = None,
                         linktype_namespace: 'Optional[dict[str, int] | dict[int, str] | Type[StdlibEnum] | Type[AenumEnum]]' = None,  # pylint: disable=line-too-long
                         linktype_reversed: 'bool' = False,
-                        snaplen: 'int' = 0xFFFF_FFFF_FFFF_FFFF,
+                        snaplen: 'int' = 0,
                         options: 'Optional[Option | list[Schema_Option | tuple[Enum_OptionType, dict[str, Any]] | bytes]]' = None,
                         **kwargs: 'Any') -> 'Schema_InterfaceDescriptionBlock':
         """Make PCAP-NG interface description block (IDB).
@@ -4489,13 +4489,18 @@ def _make_block_idb(self, block: 'Optional[Data_InterfaceDescriptionBlock]' = No
             linktype_default: Default value of link layer protocol type.
             linktype_namespace: Namespace of link layer protocol type.
             linktype_reversed: Reversed flag for link layer protocol type namespace.
-            snaplen: Snap length.
+            snaplen: Snap length, an unsigned 32-bit value; 0, the default,
+                means no limit.
             options: Block options.
             **kwargs: Arbitrary keyword arguments.
 
         Returns:
             Constructed block schema.
 
+        Raises:
+            ProtocolError: If ``snaplen`` is outside ``0`` to ``0xFFFFFFFF``,
+                which the 32-bit SnapLen field would truncate (:issue:`2278`).
+
         """
         if block is not None and hasattr(block, 'block_raw'):
             return self._make_block_short(block)  # type: ignore[return-value]
@@ -4506,6 +4511,8 @@ def _make_block_idb(self, block: 'Optional[Data_InterfaceDescriptionBlock]' = No
         else:
             linktype_val = self._make_index(linktype, linktype_default, namespace=linktype_namespace,  # type: ignore[assignment]
                                             reversed=linktype_reversed, pack=False)
+        if not 0 <= snaplen <= 0xFFFF_FFFF:
+            raise ProtocolError(f'PCAP-NG: [IDB] snaplen must be in range 0 to 0xFFFFFFFF: {snaplen!r}')
 
         if options is not None:
             options_value, total_length = self._make_pcapng_options(options, namespace='if')

tests/protocols/misc/test_pcapng_idb_snaplen_default_2278_unit.py

@@ -0,0 +1,68 @@
+# -*- coding: utf-8 -*-
+"""GitHub issue #2278: an Interface Description Block's snaplen fits its 32-bit field.
+
+Without the fix, ``_make_block_idb`` defaults ``snaplen`` to ``2**64 - 1``, which
+the 32-bit SnapLen field truncates to ``0xFFFFFFFF``, so the made info disagrees
+with the octets it parses back to, and an explicit ``snaplen`` of ``2**32`` or
+more, or below zero, is truncated the same way. The default is 0, which the
+PCAP-NG specification reads as no limit, and a value the field cannot hold
+raises :exc:`~pcapkit.utilities.exceptions.ProtocolError`.
+
+:mod:`pcapkit` is imported inside each test, after
+:func:`~tests._support.reimport_once_per_class`.
+
+"""
+
+import unittest
+from typing import TYPE_CHECKING
+
+from tests.protocols.misc.test_pcapng_roundtrip2_unit import PCAPNGTestCase
+
+if TYPE_CHECKING:
+    from typing import Any
+
+H = bytes.fromhex
+
+
+class TestPCAPNGIDBSnaplen(PCAPNGTestCase):
+    """Pin the snaplen an Interface Description Block is made with."""
+
+    def _make(self, **block: 'Any') -> 'Any':
+        """Make an Ethernet Interface Description Block from ``block``."""
+        from pcapkit.const.pcapng.block_type import BlockType
+        from pcapkit.const.reg.linktype import LinkType
+        from pcapkit.protocols.misc.pcapng import PCAPNG
+
+        return PCAPNG(num=1, sct=1, ctx=self._context(), type=BlockType.Interface_Description_Block,
+                      block={'linktype': LinkType.ETHERNET, **block})
+
+    def test_default_is_no_limit(self) -> None:
+        """The issue's case: the default writes 0, and the info says 0."""
+        made = self._make()
+        self.assertEqual(made.data.hex(), H('01000000 14000000 0100 0000 00000000 14000000').hex())
+        self.assertEqual(made.info.snaplen, 0)  # type: ignore[attr-defined]
+
+    def test_made_info_matches_the_octets(self) -> None:
+        from pcapkit.protocols.misc.pcapng import PCAPNG
+
+        for snaplen in (None, 0, 1, 0x40000, 0xFFFF_FFFF):
+            with self.subTest(snaplen=snaplen):
+                made = self._make() if snaplen is None else self._make(snaplen=snaplen)
+                parsed = PCAPNG(made.data, len(made.data), num=1, sct=1, ctx=self._context())
+                self.assertEqual(made.info.snaplen, parsed.info.snaplen)  # type: ignore[attr-defined]
+                self.assertEqual(made.info, parsed.info)
+                self.assertRebuilds(made.data)
+
+    def test_out_of_range_is_refused(self) -> None:
+        from pcapkit.utilities.exceptions import ProtocolError
+
+        for snaplen in (-1, 0x1_0000_0000, 0xFFFF_FFFF_FFFF_FFFF):
+            with self.subTest(snaplen=snaplen):
+                with self.assertRaises(ProtocolError) as context:
+                    self._make(snaplen=snaplen)
+                self.assertTrue(str(context.exception).endswith(f': {snaplen!r}'),
+                                str(context.exception))
+
+
+if __name__ == '__main__':
+    unittest.main()