An STM32H743 development board with on-board USB-HS and CAN-FD (up to 8Mbit/s)
Docs are available on kevinbot.net. Documentation is licensed under the CC BY-SA 4.0 license.
- STM32H743
- CAN-FD using DE-9 Industrial connector
- High Speed USB 2.0 using USB3300 ULPI PHY
- 128Mbit QuadSPI NOR flash
- SWD debug using MIPI-10 Cortex Debug connector
- USB-C ports for DFU and HS
- Power path switching from HS and DFU port
- RGB LED
- Boot/Reset buttons
Prototypes for this project were sponsored by PCBWay.
With their high-quality advanced PCB fabrication, fast turnaround, and excellent customer service, I recommend them for all of your PCB needs.