Skip to content

SUPPORTED_DEVICES.md

Latest commit

 

History

History
24 lines (15 loc) · 800 Bytes

SUPPORTED_DEVICES.md

File metadata and controls

24 lines (15 loc) · 800 Bytes
Raw

Supported Devices

📋 Currently Supported Inverters

  • Deye SG0XLP1 (Single Phase Low Voltage)

    Single Phase Recommended baud rate: 9600 (default, nothing to change)

  • Deye SG04LP3 (Low Voltage)

  • Deye SG05LP3 (Low Voltage)

  • Deye SG01HP3 (High Voltage)

  • Deye SG02HP3 (High Voltage)

    3 Phases Recommended baud rate: 9600 (default, nothing to change)

Deye Inverter Configuration

To set the baud rate on your Deye inverter:

  1. Navigate to: Advanced Settings → Paral. Set 3 → Boud Rate
  2. Set the value to 9600
  3. Save the settings

Note: After saving, the screen will turn off and a red LED alarm will flash - this is normal behavior. Everything should return to normal after a moment.