Skip to content
/ wiki Public

device-foscam-x5.md

Latest commit

 

History

History
84 lines (68 loc) · 2.3 KB

device-foscam-x5.md

File metadata and controls

84 lines (68 loc) · 2.3 KB
Raw

OpenIPC Wiki

Table of Content

Foscam X5 / Acculenz R5 / Assark X3E

Caution

Make sure you have a device with label stating [FCC ID: ZDER3Version 1.0]. There are now devices on the market still marked as Foscam X5, which probably have different internals and do not support following flashing procedure/image. You will end up with bricked device! The label on those newer models contain designation like: Device Name: MPS50501 FCC ID: ZDEX5 Version 6.0

Preparation

Format an sdcard to FAT32 and copy the content of the following archive to the card:

Update your wireless credentials on autostart.sh:

#!/bin/sh
+WLAN_SSID="Router"
+WLAN_PASS="12345678"

Flashing

  • Make sure the camera is powered off, put the prepared sdcard into the device.
  • Power the device on and wait at least 4 minutes.
  • Shortly after an OpenIPC camera should appear on your wlan.

GPIO

IRLed IRCut Speaker Reset IRSensor
GPIO0 GPIO3 GPIO14 GPIO66 GPIO80 
curl http://localhost/api/v1/config --data-binary @- <<'EOF'
{
  "nightMode": {
    "lightSensorPin": 80,
    "irCutPin1": 3,
    "irCutSingleInvert": true,
    "backlightPin": 0
  },
  "audio": {
    "speakerPin": 14,
    "speakerPinInvert": true
  }
}
EOF

Wireless

fw_setenv wlandev rtl8188fu-ssc337de-foscam
fw_setenv wlanssid Router
fw_setenv wlanpass 12345678

Camera disassembly

Expand pictures

Other