RC Force is limited to 6kW on a 10kW invertor

[Pluimvee]

Is this maximum limit correct, even using a 10kW hybrid invertor (S6-EH3P)

            {"name": "RC Force Battery Charge Power",
             "unique": "solis_modbus_inverter_rc_force_charge_power",
             "unit_of_measurement": UnitOfPower.WATT, "device_class": SensorDeviceClass.POWER,
             "state_class": SensorStateClass.MEASUREMENT, "editable": True, "min": 0, "max": 6000, "default": 1500,
             "register": ['43136'], "multiplier": 10},

[Pluimvee]

@Pho3niX90 Sorry to tag you, but can you help me with this question?

[Pho3niX90]

So it is suppose to get the max wattage from the array of power values of the inverter model group. I will investigate today if it catches this sensor

[Pho3niX90]

@Pluimvee It seems I only accounted for AMPERE, I will add kW and W today

solis_modbus/custom_components/solis_modbus/sensors/solis_number_sensor.py

Line 52 in a669a0e

if self._unit_of_measurement == UnitOfElectricCurrent.AMPERE:

This was added to dynamically adjust min/max values for sensors, since there are many inverters now supported. I will be adding an "advanced" section to the config where the maxes can be set for the inverter.

[Pho3niX90]

@Pluimvee See if this resolves it for you https://github.com/Pho3niX90/solis_modbus/releases/tag/3.3.11

[Pluimvee]

Unfortunatly Its not resolving the issue, the max which I can set for RC charging/discharging remains 6000W.
Do I need to change anything else for the inverter model which I'm using (S6-EH3P10 K-H-ZP) ?

[Pluimvee]

@Pho3niX90 You mentioned an "advanced" section to the config where the maxes can be set for the inverter. Where can I find this to change the max for the S6-EH3P10K-H-ZP inverter?

In the solis_config.py the maximum is set correctly:
InverterConfig(model="S6-EH3P10K-H-ZP", wattage=[10000], phases=3, type=InverterType.HYBRID, features=[InverterFeature.SMART_PORT, InverterFeature.TCP]),

[Pho3niX90]

advance section isn't available yet, as I am tying up some loose ends first in the code. It will be available in the next minor release.

this change should temporarily fix it for you
aa39cb6#diff-540e84e48ae8dd4a164fe7fa970bf88a7375c29588090e2cfe4b8bf7ff16518fR690

[Pluimvee]

It works!
I had to remove and reload the component.

One suggestion:
As I had to remove and re-install the component, I used the S6-EH3P10K-H-ZP inverter type, which caused all sensors to get another unique ID. Now I have to reconfigure all my dashboards, automations, helpers, etc.

I hoped to get the same sensors back by using the alias and give it 'S6-EH3P' as friendly name. But unfortunate the alias is concatenated to the inverter type.

Would it be an option to use the alias as replacement for the inverter type in the sensors ?

Instead of: solis_[invertype][alias][sensorname]

I would love to have this: solis_[alias][sensorname]

[Pluimvee]

Changing all the dashboards, automations, etc was a nogo, so I had to deinstall and reinstall again, starting with invertype ' S6-EH3P' to get all sensors back .
After this I changed the inverter to S6-EH3P10K-H-ZP to resolve the multiplication issue, but now the maximum is alsoback to 6000.