Skip to content

README.md

Latest commit

 

History

History
28 lines (20 loc) · 1.08 KB

README.md

File metadata and controls

28 lines (20 loc) · 1.08 KB
Raw

Firmware images (.msbl) — not included

Pulse Express boards ship pre-flashed at the ProtoCentral factory. You do not need a firmware image for normal use.

The MAX32664D application firmware (.msbl) is Maxim/Analog Devices intellectual property and is not redistributed with this library. No .msbl is, or should ever be, committed to this repository — *.msbl and *.bin are gitignored.

For factory programming / recovery only

If you are re-flashing a board (factory or recovery), place your licensed image in this directory, e.g.:

extras/firmware/MAX32664D_BPT_<version>.msbl   <-- gitignored, never committed

Then flash it with the host tool, which drives the 11.FirmwareFlash sketch over USB-Serial:

python3 ../flash_tool/flash_msbl.py --port <PORT> MAX32664D_BPT_<version>.msbl

The flashing code is implemented from Maxim/ADI User Guide 6806 (Table 9) and must be validated on hardware before production use. A failed or interrupted flash leaves the hub in bootloader mode; simply re-run the flash to recover.