Skip to content

validation: Delta Flume riser natural frequencies (L3-C) - #153

Merged
SMI-Lab-Inha merged 1 commit into
devfrom
feat/validation-delta-flume
Nov 12, 2026
Merged

SMI-Lab-Inha merged 1 commit into
devfrom
feat/validation-delta-flume

Conversation

@SMI-Lab-Inha

@SMI-Lab-Inha SMI-Lab-Inha commented Nov 12, 2026 •

Copy link
Copy Markdown
Owner

Summary

Adds validation case L3-C: the still-water natural frequencies of the Delta Flume vertical tension riser, against measurements, with no fitted parameter.

The Delta Flume tests of Chaplin et al. (J. Fluids Struct. 21, 2005, 3–24) are the stepped-current VIV benchmark of a 13.12 m riser. Before any VIV comparison, the riser model itself has to be right: its mass, added mass, bending stiffness, and the tension that falls with the submerged weight down the line. Table 2 of the paper gives the first seven still-water natural frequencies at five top tensions, so CableDyn's modal analysis can be checked against 35 measured values.

Model

validation/experiments/chaplin/chaplin_natural_frequencies.py writes one deck per tension series, runs the modal analysis about the static state, and compares.

Property Value Source
Length, diameter 13.12 m, 28 mm paper
EI 29.9 N m² paper
Mass ratio 3.0, internal water included paper (reproduces its 12.1 N/m submerged weight)
Ends pinned paper
Unstretched length the one that gives each Table 2 top tension fitted to the tension, not to the frequencies
Water, Ca, EA fresh, 1.0, 5.5e6 N assumed (not given in the paper)

Result

Statistic Value
Mean error (34 values) +1.87 %
Mean absolute error 2.28 %
Largest error 4.88 % (series A, mode 1)
Mean absolute error, all 35 2.61 %

The 35th value, series C mode 2, is measured at 1.423 Hz against 1.619 Hz computed. Its ratio to the first mode (1.82) departs from every other series (1.97–2.16), so it is reported apart but kept in the all-35 statistic.

Sensitivity:

  • Ca = 1.1 would bring the mean to +0.62 %; the default stays 1.
  • 128 elements change no frequency by more than 3e-6.
  • Ten times EA changes no frequency by more than 1.2e-4.

Files

  • validation/experiments/chaplin/: script, README, natural_frequencies.csv, summary and provenance JSON.
  • VALIDATION.md: the L3-C row and section.
  • The experiments index and doc/references.rst; the reference is checked against Crossref.

The Delta Flume tests of Chaplin et al. (2005, J. Fluids Struct. 21,
3-24) are the stepped-current VIV benchmark of a 13.12 m vertical
tension riser. Before any VIV comparison the riser model itself has to
be right: its mass, added mass, bending stiffness and the tension that
falls with the submerged weight down the line. Table 2 of the paper
gives the first seven still-water natural frequencies at five top
tensions, so CableDyn's modal analysis can be checked against 35
measured values with no fitted parameter.

validation/experiments/chaplin/chaplin_natural_frequencies.py writes a
deck per series (EI 29.9 N m^2, mass ratio 3.0 with the internal water,
which reproduces the paper's 12.1 N/m submerged weight, pinned ends,
the unstretched length that gives the Table 2 top tension), runs the
modal analysis about the static state and compares. Assumed: fresh
water, Ca 1, and EA 5.5e6 N, which the paper does not give.

Result: 1.87 % high on average over 34 values, mean absolute error
2.28 %, largest 4.88 % (series A mode 1). The 35th, series C mode 2,
is measured at 1.423 Hz against 1.619 Hz; its ratio to the first mode
(1.82) departs from every other series (1.97-2.16), so it is reported
apart and kept in the all-35 statistic (2.61 %). Ca 1.1 would bring the
mean to +0.62 %; the default stays 1. 128 elements and ten times EA
change no frequency by more than 3e-6 and 1.2e-4.

Added to VALIDATION.md as L3-C, to the experiments index and the
references; the reference is checked against Crossref.

Signed-off-by: Jae Hoon Seo <jaehoon.seo@inha.ac.kr>
@chatgpt-codex-connector

chatgpt-codex-connector Bot commented Nov 12, 2026 •

Copy link
Copy Markdown
Codex Review Summary: ✅ Completed

This comment shows the latest Codex review activity on this pull request.

Review Status Commit Review trigger
📝 Code Review ✅ Completed 2026-11-12T12:22:04.073572Z 9d737ce Manual request
ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review" or "@codex security review".

Codex reacts with 👀 while any review is running, comments if it has suggestions, and reacts with 👍 once all reviews finish with no findings.

@SMI-Lab-Inha

Copy link
Copy Markdown
Owner Author

@codex review

@read-the-docs-community

Copy link
Copy Markdown

Documentation build overview

📚 CableDyn | 🛠️ Build #35838176 | 📁 Comparing 9d737ce against latest (789cb6d)

  🔍 Preview build  

13 files changed · ± 13 modified

± Modified

@chatgpt-codex-connector

Copy link
Copy Markdown

Codex Review: Didn't find any major issues. What shall we delve into next?

Reviewed commit: 9d737cefca

ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review".

If Codex has suggestions, it will comment; otherwise it will react with 👍.

Codex can also answer questions or update the PR. Try commenting "@codex address that feedback".

@SMI-Lab-Inha
SMI-Lab-Inha merged commit a2b552d into dev Nov 12, 2026
16 checks passed
@SMI-Lab-Inha
SMI-Lab-Inha deleted the feat/validation-delta-flume branch November 12, 2026 14:14
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant