Skip to content

validation: Delta Flume riser VIV in a stepped current (L3-D) - #167

Merged
SMI-Lab-Inha merged 2 commits into
devfrom
feat/validation-delta-flume
Nov 15, 2026
Merged

SMI-Lab-Inha merged 2 commits into
devfrom
feat/validation-delta-flume

Conversation

@SMI-Lab-Inha

Copy link
Copy Markdown
Owner

Summary

Adds validation case L3-D: CableDyn's cross-flow and in-line VIV against the nine blind-trial cases of the Delta Flume riser tests (Chaplin et al. 2005a, 2005b), validation/experiments/delta_flume/. The still-water natural frequencies of the same riser are the existing case L3-C.

  • Riser: 13.12 m between pinned joints, D 28 mm, EI 29.9 N m², EA 5.88 MN, mass ratio 3.0, 0.33 % structural damping; the 11.4 kN/m top spring in series, $EA_\text{eff} = L/(1/k + L/EA)$, with the unstretched length iterated to each case's mean top tension.
  • Flow: U 0.16–0.95 m/s over the lower 5.94 m, still water above.
  • VIV set, nothing fitted to these data: synchronisation lift $C_l$ 0.8 in $\hat f_0 = 0.18 \pm 0.08$; in-line $C_x$ 0.85, $\alpha$ 0.15; $C_D$ 1.2; Chaplin's drag amplification $1 + 2.3 s + 1.7 s^2$, $s = (A/D)/\sqrt2$, on the in-line drag only (VIV DAMPING 0 0 1).
  • Measurements: the experimenters' processed results from their blind-trial presentation (Trondheim, October 2004), read from the vector graphics through the tick labels: maximum CF displacement, mean and dynamic IL displacement, CF/IL curvature std, the envelopes along the riser, and the dominant modes.

Results (64 elements, 40 s, statistics after 15 s)

Case U (m/s) Mode model/meas. $A_{CF}/D$ model/meas. Mean IL/D model/meas. Std $\kappa D$ CF model/meas.
1 0.16 2/2 0.653/0.757 1.19/1.06 5.7e-5/9.3e-5
2 0.21 3/3 0.601/0.579 1.60/1.19 1.12e-4/0.89e-4
3 0.31 4/4 0.629/0.779 3.27/3.45 2.06e-4/2.70e-4
4 0.40 4/5 0.692/0.674 4.78/4.97 2.30e-4/3.18e-4
5 0.54 6/6 0.779/0.843 6.39/6.69 4.10e-4/4.81e-4
6 0.60 6/6 0.606/0.709 6.78/8.13 4.39e-4/4.77e-4
7 0.70 6/7 0.737/0.777 8.32/8.90 4.68e-4/6.47e-4
8 0.85 6/7 0.781/0.907 9.65/11.18 4.91e-4/6.89e-4
9 0.95 8/7 0.599/1.074 10.16/13.51 6.88e-4/7.36e-4
  • Modes: right in 5 of 9, within one in all.
  • Mean in-line displacement: within ±17 % in 7 of 9 (+34 % case 2, −25 % case 9). The blind-trial presentation reports 20–40 % under-prediction of this quantity by the codes of the trial.
  • CF amplitude: −44 % to +4 % against the summary maxima (−40 % to +16 % against the envelopes; the envelope/summary scatter of the measurements is ±10 %).
  • Mean top tension: 1–13 % above the measured mean (tension is matched statically; the amplified drag bows the riser further), stated in the README.

Convergence and sensitivity (provenance.json)

  • Cases 1–4 and 6–8: dt/2 and 128 elements move the std and mean metrics by ≤ 2.6 %, the peak amplitude by ≤ 4.5 %.
  • Case 5 beats in the 40 s window (peak metrics ±20 %); case 9 has two responses (mode 7 at dt/2, mode 8 otherwise). Both are documented.
  • 38.1 kN/m top spring: mean IL 2–16 % lower, modes right in 5 of 9; 11.4 kN/m is the stated assumption.

Checks

pre-commit run --all-files; tests/test_documentation.py (12) and tests/test_validation_records.py (6); ruff on the script; Sphinx renders the new content. Indexed in VALIDATION.md, validation/README.md, validation/experiments/README.md, doc/references.rst (Chaplin et al. 2005b from Crossref), CHANGELOG.

The nine blind-trial cases of the Delta Flume riser (Chaplin et al.
2005b, J. Fluids Struct. 21, 25-40) put the lower 5.94 m of the 13.12 m
vertical riser of L3-C in a uniform current of 0.16-0.95 m/s, the rest
in still water. They test cross-flow and in-line VIV together with the
drag amplification that sets the mean in-line deflection, on one
coefficient set that is not fitted to the measurements.

validation/experiments/delta_flume/delta_flume_viv.py writes a deck per
case (EI 29.9 N m^2, mass ratio 3 with the internal water, EA 5.88 MN,
0.33 % structural damping, the 11.4 kN/m top spring in series as
EA_eff = L/(1/k + L/EA)), iterates the unstretched length until the
static top tension in the current is the case's measured mean, runs it
(64 elements, dt 1/200 of the shedding period rounded down, 40 s) and
compares over t > 15 s. VIV: Cl 0.8, cF 0.18, dF 0.08; in-line ClX 0.85,
alpha 0.15; Cd 1.2; VIV AMPLITUDE with Cv 0.8 and the drag amplification
of Chaplin et al. (2005a, Eq. 4); VIV DAMPING 0 0 1, so the
amplification acts on the in-line drag only. --cases selects cases;
the nine run in parallel in about two minutes.

The measurements are the experimenters' processed results from the
vector graphics of their blind-trial presentation (Trondheim, October
2004), read as plotted coordinates through the tick labels:
measured_summary.csv (maximum cross-flow displacement, maximum mean and
dynamic in-line displacement, overall curvature standard deviations),
the envelopes along the riser of each case (envelopes/, the curvature
scale an assumption stated there) and the dominant cross-flow modes.
The riser data not in the papers come from the project's archived
Southampton pages.

Result:
- dominant cross-flow mode right in 5 of 9 cases, within one in all;
- largest mean in-line displacement within 17 % in 7 of 9 (+34 % in
  case 2, -25 % in case 9; the blind predictions under-predicted it by
  20-40 %);
- largest cross-flow amplitude -44 % to +4 % of the measured maxima;
- cross-flow curvature standard deviation -39 % to +26 %, in-line
  -53 % to +110 %;
- the run's mean top tension is 1-13 % above the measured mean, since
  the amplified drag bows the riser beyond its static shape.

Half the time step and 128 elements leave the mode and move the mean
in-line displacement and the cross-flow curvature by at most 2.6 %
except in case 5, whose response beats in the window (peak amplitude
up to 20 %), and case 9, which settles in mode 7 instead of 8 at half
the time step. The 38.1 kN/m spring the page also lists lowers the mean
in-line displacement by 2-16 %.

Added to VALIDATION.md as L3-D, to the experiments index, the theory
guide's VIV DAMPING uses and the references (Chaplin et al. 2005b,
checked against Crossref).

Signed-off-by: Jae Hoon Seo <jaehoon.seo@inha.ac.kr>
@SMI-Lab-Inha

Copy link
Copy Markdown
Owner Author

@codex review

@chatgpt-codex-connector

chatgpt-codex-connector Bot commented Nov 15, 2026 •

Copy link
Copy Markdown
Codex Review Summary: ✅ Completed

This comment shows the latest Codex review activity on this pull request.

Review Status Commit Review trigger
📝 Code Review ✅ Completed 2026-11-15T17:03:55.441578Z 738b0dd Manual request
ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review" or "@codex security review".

Codex reacts with 👀 while any review is running, comments if it has suggestions, and reacts with 👍 once all reviews finish with no findings.

@read-the-docs-community

read-the-docs-community Bot commented Nov 15, 2026 •

Copy link
Copy Markdown

Documentation build overview

📚 CableDyn | 🛠️ Build #35909159 | 📁 Comparing 738b0dd against latest (789cb6d)

  🔍 Preview build  

14 files changed · ± 14 modified

± Modified

@chatgpt-codex-connector chatgpt-codex-connector Bot left a comment

Copy link
Copy Markdown

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

💡 Codex Review

Here are some automated review suggestions for this pull request.

Reviewed commit: 1282ff4a19

ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review".

If Codex has suggestions, it will comment; otherwise it will react with 👍.

Codex can also answer questions or update the PR. Try commenting "@codex address that feedback".

The projections used np.trapezoid, which NumPy 1.24-1.26 (inside the declared numpy>=1.24) does
not have. A row-wise trapezoid helper gives identical values.

Signed-off-by: Jae Hoon Seo <jaehoon.seo@inha.ac.kr>
@SMI-Lab-Inha

Copy link
Copy Markdown
Owner Author

@codex review

@chatgpt-codex-connector

Copy link
Copy Markdown

Codex Review: Didn't find any major issues. 🚀

Reviewed commit: 738b0ddd89

ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review".

If Codex has suggestions, it will comment; otherwise it will react with 👍.

Codex can also answer questions or update the PR. Try commenting "@codex address that feedback".

@SMI-Lab-Inha
SMI-Lab-Inha merged commit 6c469fe into dev Nov 15, 2026
16 checks passed
@SMI-Lab-Inha
SMI-Lab-Inha deleted the feat/validation-delta-flume branch November 15, 2026 19:54
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant