Skip to content

validation: SJTU catenary riser VIV under heave of its upper end (L3-Wh) - #178

Merged
SMI-Lab-Inha merged 1 commit into
devfrom
feat/validation-wang-scr
Nov 17, 2026
Merged

SMI-Lab-Inha merged 1 commit into
devfrom
feat/validation-wang-scr

Conversation

@SMI-Lab-Inha

Copy link
Copy Markdown
Owner

Summary

The truncated steel catenary riser of Wang et al. (2014), in both cases Thorsen, Sævik & Larsen (2017) use to verify their synchronisation model. Each case runs with their published coefficient set; nothing is fitted.

  • L3-W, uniform current (existing case, Sec. 5.1): the record is regenerated and unchanged.
  • L3-Wh, heave-induced VIV (new, Sec. 5.2): the upper end follows the measured top motion in still water.

L3-W: uniform current, 0.2 m/s

CableDyn Thorsen et al. model Measured
Largest r.m.s. strain / measured largest 1.073 0.996 1
Mean ratio over the 25 stations 1.036 0.970 1
r.m.s. log error 0.338 0.360 0
f at 8.25 m 0.992 Hz 1.02 Hz 1.00 Hz
r.m.s. peaks along the span 7 7 6

L3-Wh: heave-induced VIV

  • Top motion: two sinusoids of 5.96 s fitted to the measured top motion (their Fig. 19): x 0.0485 m, z 0.1305 m, with x lagging z by 83°.
  • Processing: the strain is band-passed from 4 times the motion frequency to 50 Hz, as Wang et al. process the measurement.
  • Primary result: no VIV FRAME row, which is the published model's phase input.
CableDyn Thorsen et al. model
Largest / measured largest 1.208 1.056
Station mean 1.334 1.087
Lower / upper half of the span 1.71 / 0.93 1.44 / 0.71
f at 8.25 m 1.019 Hz (measured close to 1 Hz) –

Sensitivity to the VIV FRAME filter. The heave period is about 6 VIV periods, below the scale separation the filter needs (about 30, #174), so the heave result depends on Tf. Each run is below; the last column is the strain spectrum's energy share in two bands at 8.25 m.

Tf (s) dt (s) Largest Station mean Lower / upper f (Hz) Share 0.80–0.95 / 0.95–1.10 Hz
none 0.005 1.208 1.334 1.71 / 0.93 1.019 0.01 / 0.61
0.35 0.005 1.128 1.279 1.67 / 0.86 1.012 0.17 / 0.52
0.5 0.005 1.069 1.219 1.58 / 0.82 1.019 0.17 / 0.52
0.5 0.0025 0.972 1.107 1.45 / 0.73 0.894 0.59 / 0.22
0.75 0.005 0.967 1.029 1.40 / 0.63 0.881 0.69 / 0.14
1.0 0.005 0.958 1.009 1.39 / 0.60 0.881 0.71 / 0.12

The response sits on one of two branches, about 1.02 Hz or about 0.88 Hz. At Tf 0.5 s, half the time step moves it from the first branch to the second. The filter results are therefore reported as a sensitivity, not as a result.

Convergence on this build

Change Current: largest strain Heave (Tf = 0): largest strain Heave (Tf = 0): station mean
Half the time step +0.13 % −1.0 % −2.9 %
400 elements instead of 200 +0.24 % −0.7 % −2.3 %

The frequencies are unchanged.

Data and scripts

  • extract_thorsen2017.py reads the article's PDF:

    • Figs. 17 and 22, the measured and simulated r.m.s. strain, from the vector graphics;
    • the Fig. 19 top motion, from the raster.

    Thorsen et al.'s simulated lines peak at 99.6 % and 105.6 % of the measured largest strain. Their text gives 99.6 % and "6 % high".

  • wang_scr_viv.py replaces wang_scr_uniform_current.py. It:

    • writes the 11 decks of the record (primary, convergence and Tf runs) and runs them in parallel;
    • reuses a run whose inputs and executable are unchanged; before new inputs are written, the result, the executable stamp and the output are removed, as in validation: FLOTANT power-cable specimen VIV in tow tests (L3-F) #175;
    • prints n/a for a score with nothing to score.
  • Reproducibility: the default command, run into a new work directory, reproduces response_comparison.csv and summary.json byte for byte.

  • Stated limitations:

    • the EA differs between the sources (6.67e5 N in Wang Table 2, 6.66e5 N in Thorsen Table 1; the case uses Thorsen's);
    • Thorsen et al. do not say which heave test their run is;
    • the lower-half excess is unexplained.

Checks

  • ctest: 431/431, including documentation_sources and validation_records.
  • Sphinx: builds with -W.
  • pre-commit: clean on the changed files; ruff is clean on both scripts.
  • References: Wang et al. (2014) and Thorsen et al. (2017), already in doc/references.rst, were checked against the articles' first pages.

The truncated steel catenary riser of Wang et al. (2014) in both cases
Thorsen, Saevik & Larsen (2017) use to verify the synchronisation model,
each with their published coefficient set, nothing fitted:

- uniform current, 0.2 m/s (L3-W, Sec. 5.1): f at 8.25 m 0.992 Hz
  against the measured 1.00 Hz (their model 1.02 Hz); largest r.m.s.
  strain 1.073 times the measured largest (theirs 0.996), station mean
  1.036 (theirs 0.970), r.m.s. log error 0.338 (theirs 0.360). The
  numbers of the earlier record are unchanged.
- heave-induced VIV in still water (L3-Wh, Sec. 5.2): the upper end
  follows two sinusoids of 5.96 s fitted to the measured top motion
  (their Fig. 19: x 0.0485 m, z 0.1305 m, x lagging z by 83 deg); the
  strain is band-passed from 4 times the motion frequency to 50 Hz as
  Wang et al. process the measurement. Without a VIV FRAME row, the
  published model's phase input: f 1.019 Hz (measured close to 1 Hz),
  largest strain 1.208 times the measured largest (theirs 1.056),
  station mean 1.334 (theirs 1.087), lower / upper half of the span
  1.71 / 0.93 (theirs 1.44 / 0.71).

The heave period is about 6 VIV periods, below the scale separation
the VIV FRAME filter needs (about 30), and the heave result depends on
Tf. With Tf 0.35-0.5 s the response stays at 1.01-1.02 Hz (largest
strain 1.07-1.13); with 0.75-1 s it moves to 0.88 Hz (0.96-0.97,
upper half 0.60-0.63); at Tf 0.5 s half the time step moves it from
the first branch to the second. It is reported as a sensitivity.

Convergence on this build: half the time step and 400 elements change
the largest strain by +0.13 % and +0.24 % in the current, -1.0 % and
-0.7 % in heave (station mean -2.9 % and -2.3 %), frequencies
unchanged.

validation/experiments/wang_scr/wang_scr_viv.py writes the 11 decks of
the record (primary, convergence and Tf runs), runs them in parallel,
reuses a run whose inputs and executable are unchanged (removing the
result, the executable stamp and the output before new inputs are
written) and compares; the default command run into a new work
directory reproduces response_comparison.csv and summary.json byte for
byte. It replaces wang_scr_uniform_current.py. extract_thorsen2017.py
reads Figs. 17 and 22 (vector) and the Fig. 19 top motion (raster)
from the article's PDF; Thorsen et al.'s simulated lines peak at
99.6 % and 105.6 % of the measured largest strain, where their text
gives 99.6 % and 6 % high.

VALIDATION.md, the experiments indexes, the README, the CHANGELOG and
the theory manual's table of published coefficient sets name the new
case.

Signed-off-by: Jae Hoon Seo <jaehoon.seo@inha.ac.kr>
@SMI-Lab-Inha

Copy link
Copy Markdown
Owner Author

@codex review

@chatgpt-codex-connector

chatgpt-codex-connector Bot commented Nov 17, 2026 •

Copy link
Copy Markdown
Codex Review Summary: ✅ Completed

This comment shows the latest Codex review activity on this pull request.

Review Status Commit Review trigger
📝 Code Review ✅ Completed 2026-11-17T07:31:52.431141Z 59c38ef Manual request
ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review" or "@codex security review".

Codex reacts with 👀 while any review is running, comments if it has suggestions, and reacts with 👍 once all reviews finish with no findings.

@read-the-docs-community

Copy link
Copy Markdown

Documentation build overview

📚 CableDyn | 🛠️ Build #35949726 | 📁 Comparing 59c38ef against latest (789cb6d)

  🔍 Preview build  

15 files changed · ± 15 modified

± Modified

@chatgpt-codex-connector

Copy link
Copy Markdown

Codex Review: Didn't find any major issues. Already looking forward to the next diff.

Reviewed commit: 59c38efd9a

ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review".

If Codex has suggestions, it will comment; otherwise it will react with 👍.

Codex can also answer questions or update the PR. Try commenting "@codex address that feedback".

@SMI-Lab-Inha
SMI-Lab-Inha merged commit 15b5ebc into dev Nov 17, 2026
16 checks passed
@SMI-Lab-Inha
SMI-Lab-Inha deleted the feat/validation-wang-scr branch November 17, 2026 10:30
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant