Skip to content

validation: Southampton untensioned catenary riser VIV with touchdown (L3-K) - #182

Merged
SMI-Lab-Inha merged 1 commit into
devfrom
feat/validation-chaplin-catenary
Nov 17, 2026
Merged

SMI-Lab-Inha merged 1 commit into
devfrom
feat/validation-chaplin-catenary

Conversation

@SMI-Lab-Inha

Copy link
Copy Markdown
Owner

Summary

Validation case L3-K (validation/experiments/chaplin_catenary): cross-flow VIV of the untensioned catenary model riser of Chaplin & King (2018, J. Fluids Struct. 79, 26–38, doi:10.1016/j.jfluidstructs.2018.01.008). A 5.36 m, 56 mm riser with EI 1.3 N m², pinned on the floor of a 2 m flume and 0.2 m above the surface 4.30 m away, tensioned only by its weight and the drag, much of it on the floor; two mass ratios (2.9 and 20.9 N/m submerged), current 0.2–1.4 m/s in both directions.

The article measures one cross-flow frequency along the whole riser, close to $f d/U = 0.11$, while the local Strouhal number on the normal velocity runs from 0.11 to above 0.3. The case asks whether a local time-domain VIV model reproduces that, and what the drag amplification does to the tension of a riser tensioned only by drag. No parameter is fitted to these tests.

Findings

  • Uniform frequency, at each model's own level. In positive current every set gives one frequency over the suspended span, the curved lower part included (within 10 % in 26/26 runs with the generic set, 22 with the wake oscillator, 20 with Ulveseter et al. 2019), at $f d/U$ = 0.121, 0.138 and 0.17 against 0.111 measured.
  • Negative current: the heavy riser's measured frequency levels at 1.05–1.16 Hz from 1.1 m/s; Ulveseter et al.'s set also levels off, at 1.45–1.5 Hz ($f d/(U\sin\psi)$ 0.130 against 0.119); the generic set gives 1.45–1.85 Hz, the wake oscillator 2.1–2.45 Hz.
  • Tension needs the drag amplification. With Chaplin et al.'s (2005, Eq. 4) amplification (generic set) the light riser's tension in positive current is within 9.8 % r.m.s.; its rise to 1.4 m/s is 88.8 N against 88.6 N measured (49.8 N without VIV). The same set gives the heavy riser's straight-line inclination in negative current to 5.0° r.m.s.: the implied $C_d$ by the article's Eq. 9 is 2.55 against 2.47 measured.
  • Data caveat: with the article's length, span and weights the heavy riser's still-water top tension is 81.2 N against 59.1/61.8 N measured (light 15.1 against 13.4/11.5 N); the geometry does not close, so tensions are also compared as increments from still water.
Set T r.m.s. rel. error, positive (m* 1.12 / 1.84) f d/U, positive upper (meas. 0.111 / 0.113) Heavy-riser ψ r.m.s., negative
none (C_d 1.2) 0.245 / 0.135 – 10.1°
uls19 0.178 / 0.150 0.121 10.1°
b1 0.098 / 0.238 0.138 5.0°
wake 0.234 / 0.139 0.173 / 0.168 10.3°

Data and extraction

extract_chaplin2018.py reads Figs. 9, 10, 12(a), 13 and 15(a) (greyscale rasters) from the article's PDF (not distributed):

  • calibration on the frame and on tick marks found on both opposite sides (largest residual 0.0010 m/s, 0.0036 Hz, 0.07°, 0.14 N);
  • circle Hough transform for the markers, classed open/solid by fill, snapped to the 0.05 m/s test grid (largest snap 0.012 m/s); error bars from their caps (46 and 44 standard deviations read in Figs. 10 and 13);
  • checks: the drawn line $f d/U = 0.11$ reads 0.105/0.108; the drawn $W h$ lines in Fig. 13 read 41.9 and 5.65 N against Table 1's 41.8 and 5.8 N;
  • --check DIR overlays what was read; markers hidden under others (most open markers of Fig. 9(a)) are lost and reported.

Model

  • 54 finite-EI elements, pinned ends, mass $\rho A + W/g$, $C_d$ 1.2, $C_a$ 1, fresh water; the 0.2 m above the surface dry.
  • Floor contact with friction 0.5 (not given; frictionless as sensitivity); 3 % Rayleigh damping at 0.3 and 3.0 Hz (EI|-zeta|f1|f2; none as sensitivity).
  • Current ramped from still water over 10 s (Currents 2): a static solve in the full current finds no equilibrium for some light-riser cases in negative current.
  • dt 2.5 ms, 110 s, statistics over the last 80 s; three published sets (uls19, b1, wake) as in the FLOTANT/NDP cases, and none.

Convergence and sensitivity

  • Half the time step: mean tension ≤ 0.6 % (one run +5.3 %), standard deviation ≤ 5.5 %; twice the elements: mean ≤ 2.9 %, standard deviation ≤ 17 %, frequency ≤ one bin.
  • No structural damping: mean −1.3 to +15.5 %, standard deviation up to +296 %. Frictionless floor: mean −3 to +40 %, standard deviation up to +412 %, 34/54 frequencies change. Friction is the largest modelling uncertainty after the still-water geometry.
  • The default command into a new work directory reproduces response_comparison.csv and summary.json byte for byte (294 runs, about an hour on 4 processes).

Documentation

VALIDATION.md (L3-K row and section), validation/experiments/README.md, validation/README.md, README.md (nine published physical experiments), CHANGELOG.md, doc/references.rst (ref-chaplin2018).

Checks

  • ctest -R "documentation|validation_records": pass.
  • ruff check and ruff format --check on the two scripts: clean.
  • Record built with GNU Fortran 16.2.0, Release, from 15b5ebc; executable SHA-256 in summary.json.

… (L3-K)

Add validation/experiments/chaplin_catenary: the 5.36 m, 56 mm model riser
of Chaplin & King (2018), EI 1.3 N m^2, pinned on the floor of a 2 m flume
and 0.2 m above the surface, at both mass ratios in current of 0.2-1.4 m/s
in both directions, against the measured mean top tension and its standard
deviation (Figs. 10, 13), cross-flow spectral peak frequencies (Figs. 9,
15) and straight-part inclination (Fig. 12), read from the article's raster
figures by extract_chaplin2018.py (frame and tick calibration, circle Hough
markers, error-bar caps, checks on the drawn f d/U = 0.11 and W h lines).

Three published coefficient sets, none fitted to these tests, and a run
without VIV. Every set gives one frequency along the suspended span in
positive current, as measured, at f d/U 0.121 (Ulveseter et al. 2019),
0.138 (generic set) and 0.17 (wake oscillator) against 0.111. The generic
set's drag amplification gives the light riser's tension rise (9.8 %
r.m.s.; 88.8 against 88.6 N to 1.4 m/s) and the heavy riser's inclination
in negative current (5.0 deg r.m.s., implied Cd 2.55 against 2.47). The
heavy riser's still-water tension is 37 % above the measured with the
article's geometry, reported as a caveat; tensions are also compared as
increments. Convergence, structural-damping and floor-friction runs are in
the record; the default command reproduces it byte for byte.

Update VALIDATION.md, the experiment lists, CHANGELOG.md and the
references (ref-chaplin2018).

Signed-off-by: Jae Hoon Seo <jaehoon.seo@inha.ac.kr>
@SMI-Lab-Inha

Copy link
Copy Markdown
Owner Author

@codex review

@chatgpt-codex-connector

chatgpt-codex-connector Bot commented Nov 17, 2026 •

Copy link
Copy Markdown
Codex Review Summary: ✅ Completed

This comment shows the latest Codex review activity on this pull request.

Review Status Commit Review trigger
📝 Code Review ✅ Completed 2026-11-17T13:06:02.224775Z 090850b Manual request
ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review" or "@codex security review".

Codex reacts with 👀 while any review is running, comments if it has suggestions, and reacts with 👍 once all reviews finish with no findings.

@read-the-docs-community

Copy link
Copy Markdown

Documentation build overview

📚 CableDyn | 🛠️ Build #35956513 | 📁 Comparing 090850b against latest (789cb6d)

  🔍 Preview build  

15 files changed · ± 15 modified

± Modified

@chatgpt-codex-connector

Copy link
Copy Markdown

Codex Review: Didn't find any major issues. Chef's kiss.

Reviewed commit: 090850b195

ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review".

If Codex has suggestions, it will comment; otherwise it will react with 👍.

Codex can also answer questions or update the PR. Try commenting "@codex address that feedback".

@SMI-Lab-Inha
SMI-Lab-Inha merged commit a46d997 into dev Nov 17, 2026
16 checks passed
@SMI-Lab-Inha
SMI-Lab-Inha deleted the feat/validation-chaplin-catenary branch November 17, 2026 15:49
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant