Skip to content
Merged
Show file tree
Hide file tree
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension


Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
4 changes: 4 additions & 0 deletions CHANGELOG.md
Original file line number Diff line number Diff line change
Expand Up @@ -46,6 +46,10 @@ All notable changes to CableDyn are recorded in this file. The format follows
numbers them from 0, so a MoorDyn deck's `N<J>` is CableDyn's `N<J+1>`, or `N<NumSegs+1-J>` on
a line written anchor-first. The numbering itself is unchanged; the outputs and migration pages
state it.
- The run banner, README, manual, citation and package descriptions call CableDyn what it is: a
geometrically exact finite-element solver for the statics and dynamics of mooring lines and
dynamic power cables (its strain and curvature are the exact large-deformation measures), in
place of "geometrically nonlinear cable & mooring dynamics".

### Fixed

Expand Down
7 changes: 4 additions & 3 deletions CITATION.cff
Original file line number Diff line number Diff line change
Expand Up @@ -3,11 +3,12 @@ message: >-
If you use CableDyn in academic work, please cite the journal article given
as the preferred citation. To identify the exact software release used, also
cite this software entry with its version.
title: "CableDyn: A cable and mooring dynamics solver for floating offshore wind"
title: "CableDyn: Geometrically exact finite-element statics and dynamics of mooring lines and dynamic power cables for floating offshore wind"
type: software
abstract: >-
CableDyn is an open-source finite-element solver for the static and dynamic
analysis of offshore mooring lines and dynamic power cables. It combines
CableDyn is an open-source, geometrically exact finite-element solver for the
static and dynamic analysis of offshore mooring lines and dynamic power cables.
Its strain and curvature are the exact large-deformation measures. It combines
tension-only elements for moorings with cubic-Hermite finite-bending elements
for power cables, solves the static equilibrium by Newton's method, and
integrates the dynamics with the implicit generalised-alpha scheme. It runs as
Expand Down
2 changes: 1 addition & 1 deletion CMakeLists.txt
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,7 @@
cmake_minimum_required(VERSION 3.20)
# VERSION is a bare numeric triple matching the release version.
project(CableDynCore VERSION 0.3.0 LANGUAGES C Fortran
DESCRIPTION "CableDyn geometrically nonlinear cable/mooring solver — Fortran core")
DESCRIPTION "CableDyn geometrically exact cable/mooring solver — Fortran core")

option(CABLEDYN_ENABLE_COVERAGE "Instrument the GNU Fortran core for gcov/gcovr source coverage" OFF)
option(CABLEDYN_ENABLE_OPENMP "Enable OpenMP acceleration when the compiler provides it" ON)
Expand Down
7 changes: 5 additions & 2 deletions README.md
Original file line number Diff line number Diff line change
Expand Up @@ -9,8 +9,11 @@
[![License: Apache-2.0](https://img.shields.io/badge/license-Apache--2.0-blue.svg)](LICENSE)
[![DOI](https://img.shields.io/badge/DOI-10.1016%2Fj.oceaneng.2026.128332-blue.svg)](https://doi.org/10.1016/j.oceaneng.2026.128332)

CableDyn is an open-source finite-element solver for the static and dynamic
analysis of offshore mooring lines and dynamic power cables. It is written in
CableDyn is an open-source, geometrically exact finite-element solver for the
static and dynamic analysis of offshore mooring lines and dynamic power cables.
Its strain and curvature are the exact large-deformation measures, never
linearised, so large displacements and rotations, slack and snap, and a line
lifting off the seabed lie inside the formulation. It is written in
Fortran 2018 and runs as a standalone program, as a mooring module of OpenFAST,
maintained by NLR (National Laboratory of the Rockies, formerly NREL)
(`CompMooring = 5`), through a C interface, or from Python. It reads input decks
Expand Down
10 changes: 6 additions & 4 deletions doc/citing.rst
Original file line number Diff line number Diff line change
Expand Up @@ -36,14 +36,16 @@ Incheon, Republic of Korea.
Software release
----------------

Seo, J. H. (2026). *CableDyn: A cable and mooring dynamics solver for floating offshore
wind* (version 0.3.0) [Computer software]. https://github.com/SMI-Lab-Inha/CableDyn
Seo, J. H. (2026). *CableDyn: Geometrically exact finite-element statics and dynamics of
mooring lines and dynamic power cables for floating offshore wind* (version 0.3.0) [Computer
software]. https://github.com/SMI-Lab-Inha/CableDyn

.. code-block:: bibtex

@software{CableDyn_0_1_1,
@software{CableDyn_0_3_0,
author = {Seo, Jae Hoon},
title = {{CableDyn}: A cable and mooring dynamics solver for floating offshore wind},
title = {{CableDyn}: Geometrically exact finite-element statics and dynamics of mooring
lines and dynamic power cables for floating offshore wind},
version = {0.3.0},
year = {2026},
url = {https://github.com/SMI-Lab-Inha/CableDyn},
Expand Down
8 changes: 5 additions & 3 deletions doc/index.rst
Original file line number Diff line number Diff line change
Expand Up @@ -3,9 +3,11 @@
CableDyn
========

**CableDyn** is an open-source (`Apache-2.0 <https://www.apache.org/licenses/LICENSE-2.0>`_)
cable and mooring dynamics solver for floating offshore wind turbines and substations, written
in modern **Fortran 2018**. It targets dynamic power cables in the lazy-wave configuration and
**CableDyn** is an open-source (`Apache-2.0 <https://www.apache.org/licenses/LICENSE-2.0>`_),
geometrically exact finite-element solver for the statics and dynamics of mooring lines and
dynamic power cables of floating offshore wind turbines and substations, written in modern
**Fortran 2018**. Its strain and curvature are the exact large-deformation measures, never
linearised (:doc:`theory`). It targets dynamic power cables in the lazy-wave configuration and
taut, semi-taut, and catenary moorings. It reads MoorDyn v2 input decks and has been compared
with MoorDyn-C, MoorDyn-F, and OrcaFlex on common reference cases.

Expand Down
4 changes: 2 additions & 2 deletions doc/installation.rst
Original file line number Diff line number Diff line change
Expand Up @@ -121,8 +121,8 @@ Check that it runs

===================================================================
CableDyn v0.3.0
Geometrically nonlinear cable & mooring dynamics for floating wind
(lazy-wave power cables and taut / semi-taut / catenary moorings)
Geometrically exact finite-element statics and dynamics of
mooring lines and dynamic power cables for floating offshore wind
-------------------------------------------------------------------
Author Prof. Jae Hoon Seo
Affil. Inha University, Republic of Korea
Expand Down
4 changes: 2 additions & 2 deletions doc/quickstart.rst
Original file line number Diff line number Diff line change
Expand Up @@ -39,8 +39,8 @@ The run takes well under a second:

===================================================================
CableDyn v0.3.0
Geometrically nonlinear cable & mooring dynamics for floating wind
(lazy-wave power cables and taut / semi-taut / catenary moorings)
Geometrically exact finite-element statics and dynamics of
mooring lines and dynamic power cables for floating offshore wind
-------------------------------------------------------------------
Author Prof. Jae Hoon Seo
Affil. Inha University, Republic of Korea
Expand Down
2 changes: 1 addition & 1 deletion doc/tutorial_openfast.rst
Original file line number Diff line number Diff line change
Expand Up @@ -169,7 +169,7 @@ The CableDyn part of the console (other modules' lines trimmed):
.. code-block:: text

Running CableDyn (v0.3.0, 2026-10-23).
CableDyn: geometrically nonlinear cable & mooring dynamics for floating wind.
CableDyn: geometrically exact finite-element statics and dynamics of mooring lines and dynamic power cables.
...
CableDyn time step dtM = 2.50000E-02 s (1 x glue DT; deck dtM)
Parsing CableDyn input file: .\CableDyn_UMaine.dat
Expand Down
2 changes: 1 addition & 1 deletion pyproject.toml
Original file line number Diff line number Diff line change
Expand Up @@ -13,7 +13,7 @@ build-backend = "scikit_build_core.build"
[project]
name = "cabledyn"
version = "0.3.0"
description = "Python APIs for the CableDyn standalone driver and native coupling library"
description = "Python tools for CableDyn, a geometrically exact finite-element solver for mooring lines and dynamic power cables"
readme = "python/README.md"
requires-python = ">=3.10"
license = "Apache-2.0"
Expand Down
2 changes: 1 addition & 1 deletion python/cabledyn/__init__.py
Original file line number Diff line number Diff line change
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: Apache-2.0
"""Python interfaces for the CableDyn cable and mooring dynamics solver.
"""Python interfaces for CableDyn, the geometrically exact cable and mooring solver.

The standalone-driver API works with the statically linked release executable.
The in-process :class:`CableDyn` class, and the ``abi_version``, ``abi_minor``,
Expand Down
2 changes: 1 addition & 1 deletion python/pyproject.toml
Original file line number Diff line number Diff line change
Expand Up @@ -8,7 +8,7 @@ build-backend = "setuptools.build_meta"
[project]
name = "cabledyn"
version = "0.3.0"
description = "Python APIs for the CableDyn standalone driver and native coupling library"
description = "Python tools for CableDyn, a geometrically exact finite-element solver for mooring lines and dynamic power cables"
readme = "README.md"
requires-python = ">=3.10"
license = "Apache-2.0"
Expand Down
4 changes: 2 additions & 2 deletions src/CableDyn_Banner.f90
Original file line number Diff line number Diff line change
Expand Up @@ -27,9 +27,9 @@ PURE FUNCTION CD_Banner_Line(i) RESULT(s)
CASE (2)
s = ' CableDyn v0.3.0'
CASE (3)
s = ' Geometrically nonlinear cable & mooring dynamics for floating wind'
s = ' Geometrically exact finite-element statics and dynamics of'
CASE (4)
s = ' (lazy-wave power cables and taut / semi-taut / catenary moorings)'
s = ' mooring lines and dynamic power cables for floating offshore wind'
CASE (5)
s = ' -------------------------------------------------------------------'
CASE (6)
Expand Down
3 changes: 2 additions & 1 deletion src/openfast/CableDyn_OF.f90
Original file line number Diff line number Diff line change
Expand Up @@ -543,7 +543,8 @@ SUBROUTINE CD_Init(InitInp, u, p, x, xd, z, other, y, m, DTcoupling, InitOut, Er
! ------------------------------------------------------------------------------
CALL DispNVD( CableDyn_ProgDesc )
InitOut%Ver = CableDyn_ProgDesc
CALL WrScr( ' CableDyn: geometrically nonlinear cable & mooring dynamics for floating wind.' )
CALL WrScr( ' CableDyn: geometrically exact finite-element statics and dynamics of mooring lines '// &
'and dynamic power cables.' )
CALL WrScr( ' Author Prof. Jae Hoon Seo, Inha University. License Apache-2.0.' )
CALL WrScr( ' CompMooring = 5: mooring and dynamic power-cable loads are computed by CableDyn,' )
CALL WrScr( ' an OpenFAST mooring module alongside MoorDyn (CompMooring = 3) in this binary.' )
Expand Down
Loading