Skip to content

ci(wheels): build the macOS wheel on the macOS 15 runner - #76

Merged
SMI-Lab-Inha merged 1 commit into
devfrom
ci/macos-15
Oct 31, 2026
Merged

SMI-Lab-Inha merged 1 commit into
devfrom
ci/macos-15

Conversation

@SMI-Lab-Inha

Copy link
Copy Markdown
Owner

GitHub retires the macos-14 runner image on 2 November 2026, and its scheduled brownouts
already cancel the wheels / macos job (#73, #74, #75: "Cancelled after 1s", annotated as a
macOS 14 brownout, actions/runner-images#13518).

  • .github/workflows/wheels.yml: the macOS wheel builds on macos-15 with
    MACOSX_DEPLOYMENT_TARGET=15.0, the oldest macOS its Homebrew gfortran and OpenBLAS bottles
    support there, so delocate accepts the bundled libraries. The wheel tag becomes
    macosx_15_0_arm64 (0.3.0: macosx_14_0_arm64).
  • The installation page, the README and the CHANGELOG (Changed) say the macOS wheel needs
    macOS 15 or newer on Apple silicon; on macOS 14, build from source.

No code change. Docs build with warnings as errors locally; the wheels / macos job of this PR
is the build and smoke test of the new wheel.

GitHub retires the macos-14 runner image on 2 November 2026, and its
scheduled brownouts already cancel the macOS wheel job. The job now runs
on macos-15 with MACOSX_DEPLOYMENT_TARGET=15.0, the oldest macOS its
Homebrew gfortran and OpenBLAS support, so the wheel needs macOS 15 or
newer on Apple silicon (0.3.0: macOS 14). The installation page, the
README and the CHANGELOG say so.

Signed-off-by: Jae Hoon Seo <jaehoon.seo@inha.ac.kr>
@SMI-Lab-Inha

Copy link
Copy Markdown
Owner Author

@codex review

@chatgpt-codex-connector

chatgpt-codex-connector Bot commented Oct 31, 2026 •

Copy link
Copy Markdown

Codex Review Summary

This comment shows the latest Codex review activity on this pull request.

Review Status Commit Review trigger
📝 Code Review ✅ Completed 2026-10-31T05:07:43.006127Z b687efa Manual request
ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review" or "@codex security review".

Codex reacts with 👀 while any review is running, comments if it has suggestions, and reacts with 👍 once all reviews finish with no findings.

@chatgpt-codex-connector

Copy link
Copy Markdown

Codex Review: Didn't find any major issues. 🎉

Reviewed commit: b687efaa11

ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review".

If Codex has suggestions, it will comment; otherwise it will react with 👍.

Codex can also answer questions or update the PR. Try commenting "@codex address that feedback".

@read-the-docs-community

Copy link
Copy Markdown

Documentation build overview

📚 CableDyn | 🛠️ Build #35540339 | 📁 Comparing b687efa against latest (fd1936d)

  🔍 Preview build  

32 files changed · ± 32 modified

± Modified

@SMI-Lab-Inha
SMI-Lab-Inha merged commit 1a8a606 into dev Oct 31, 2026
21 checks passed
@SMI-Lab-Inha
SMI-Lab-Inha deleted the ci/macos-15 branch October 31, 2026 06:22
SMI-Lab-Inha added a commit that referenced this pull request Oct 31, 2026
…, on lines as long as their span and on bodies with pinned cables (#77)

## What changed

Six accuracy items from the open list, rebased onto dev (#73 torsion linearisation, control and modal analysis, #74 torsion on the mixed deck, at one end and on a rod end, #75 lines with two moving ends, #76), one commit that closes where they meet dev's newer routes, and four fixes from an independent review.

- **Dry weight of an `EI = 0` line above the surface.** With a seabed the march gives the part of a line above the still-water level its dry weight; the static start kept its buoyancy. `CD_Static_Line_Equilibrium` now carries the dry part as a fixed point on the wetted lengths. A chain hung from 5 m above the surface starts in the march's equilibrium (holds to 1e-10; before 1e-3 of its fairlead load in the first step), and the coupled and standalone starts agree to 1.4e-8 (before 2.4e-4).
- **The same dry weight in the force balance of `Connect`/`Free` points, bodies and rods** (`solve_body_equilibrium_core`, its warm and cold line solves, the new `CD_Static_Line_Dry_Load`). A 50 t `Connect` point hung by two chains from 10 m above the surface holds its position over 2 s (before it sank 1.1e-2 m). An `EI = 0` chain between two moving objects across the surface, a body point 5 m above it and a `Connect` clump, holds both (before 5.5e-3 m). In that balance a finite-EI line, carried without its bending stiffness, now takes its dry weight with or without a seabed, as its cubic-Hermite cable does: a body with a light pinned cable 5 m above the surface on a deck without a seabed holds its heave to 7e-6 m (before 2.8e-3 m).
- **`ATTACHMENTS` above the surface.** The march loads an attachment above the free surface with its weight alone, while the attachment polish and the torsion stage after it kept its buoyancy. Each solve now takes every attachment's load for the side of the surface its node is on, and the final solve is repeated until no attachment changes side. A 500 kg, 0.2 m³ module 3 m above the surface held the fairlead load over 1 s to the output's 8 digits, restrained in torsion as well (before it moved by up to 6.1e-2). An attachment carried above and below the surface on alternate solves (a net-buoyant module that would float, which a point attachment cannot represent) fails closed, and the message leads with that attachment's index, Mass and Volume.
- **A pinned cable with `ATTACHMENTS` in the body static balance.** The object solve left a bending-pinned End A free in torsion to its cable without bending stiffness, which carries no attachments. Such a line now takes the static passes of a connected end. On a moored body with a 2 t clump on a pinned cable the body holds its pose (before it drifted by up to 2.9e-2 m and 0.20 deg in 5 s).
- **Current gradient in the finite-EI static tangent.** A depth profile is sampled at the node elevations and a current grid at the node positions, so the drag moves with the nodes. The Newton tangent now carries that: the drag tangent matches central differences to 4e-10 to 1.7e-9 (before 5e-2 to 0.2), also at the twisted equilibrium of a line restrained in torsion with `GJ|K` (4.3e-10, before 5.4e-2). The equilibria do not change beyond the solver tolerance; Newton converges faster in strong shear (16 instead of 23 iterations).
- **Force-scale floor for a finite-EI line as long as its span.** The static start of a neutral line whose length equals its span failed with neutral or drag-area `ATTACHMENTS`: the polish stalled at the round-off of the axial forces. For a line whose chord is at least its length, the convergence scale now includes that floor over the tolerance, as on the `EI = 0` path. Such lines now start straight and unloaded, also between two moving ends, restrained in torsion at both ends or at End A only, and with a chord 1e-8 longer than the line (0.1 N to 2.2e-7 N). All of these failed on dev.
- Docs: the linearisation at an accelerating coupled point (`doc/openfast.rst`, `VALIDATION.md`), and the carry spin of a held end section, measured and left out (`doc/theory.rst`; the modal analysis and the OpenFAST linearisation of #73 leave it out as well).

## Review fixes

- **The attachment with no static side is named** (`attachment_static_polish`, `torsion_after_attachments`): a 200 kg, 2 m³ module 50 m along a slack cable stopped with only "the homotopy stopped at load fraction 0.625000"; every later failure now leads with the attachment that crossed the surface (`static_dry_weight` 9). On dev the same deck ran with the module 4.5 m above the surface and its buoyancy kept.
- **A pinned cable with `ATTACHMENTS` on a `Point3` buoy** is refused by the existing `Point3` message instead of an END CONNECTIONS message for a deck without that row (`line_attachments` 10).
- **The body passes of a pinned cable with `ATTACHMENTS` are Anderson-mixed**, as the passes of a line between two objects are: on a spar rod with a 1500 kg clump on a pinned cable the plain passes diverged (end-load change 2.9 of the force scale after 60) and the deck stopped; they now converge in 26 and the rod holds to 8 digits over 3 s (`line_attachments` 11).
- **Every bending-pinned finite-EI line on a Rigid6 body or a rod end takes the (mixed) passes**, with or without attachments: the stand-in without bending stiffness put a spar rod's start 5.7e-2 m off equilibrium (7e-2 m drift and a 2.3 % leg tension change in 3 s); it now holds to 8 digits after 4 passes (`line_attachments` 12; before 1.8e-4 m in 0.1 s). This changes the static start of user decks with a pinned finite-EI cable on a free body or rod by the bending share of the end force; no example deck has one.
- **Body passes that do not hinge on round-off** (after the Linux Release job failed `line_attachments` 11 with no convergence in 60 passes, where Windows took 26): the core solve's stand-in cable now carries the line's `ATTACHMENTS` smeared as net weight, as the Hermite statics smear them, so the passes correct only the lumped, surface-side, drag and bending differences (the whole 15 kN clump load before); a failed pass set is repeated once on the stand-in without attachments; and the Anderson column-drop bound is 1e-6 instead of 1e-10 (a pinned end's residual spans fewer directions than the history, so later columns were round-off with coefficients near 1e12). Gate 11 converges in 6 passes, geometrically. New gate 13: the same deck with a leg anchor moved 1 ulp either way gives the same rod pose to 1e-9 m in 6 passes each (before 26, no convergence after 60, 26). Across a 45-deck sweep of rod and body decks (clump mass, cable length, rod mass, start offsets, 1-ulp and 1e-14 m moves) 42 converge, 34 before; the two-object decks are unchanged. Gates 11 and 12 march at `dtM` 0.002 s, because the explicit coupling of a cable to a free rod on this branch is unstable at 0.01 s (fixed separately in the next PR).
- Known and left: the as-laid friction reference still takes an attachment's net in-water weight, which matters only where the seabed rises above `z = 0`.

## Rebase notes

- Conflicts were only in `CHANGELOG.md` (entries kept side by side), `doc/openfast.rst` (the torsion linearisation paragraph of #73 kept, and the zero-frequency paragraph replaced by this branch's operating-point version) and `doc/theory.rst` (the carry-spin paragraph placed before #74's free-end section). The source files merged cleanly. `cached_line_solve`, `prepare_line` and `warm_line_solve` sit on #75's two-ends object solve unchanged: the line cache already treats both ends alike.
- The carry-spin commit message no longer says the modal analysis refuses torsion.

## Gates

- `static_dry_weight` 1-8: gates 1-5 as before. Gate 6: a module above the surface, plain and restrained in torsion (0; before 6.1e-2), and a submerged module as guard. Gate 7: a pinned cable above the surface on a body without a seabed (7e-6 m; before 2.8e-3 m). Gate 8: an `EI = 0` chain between a body above the surface and a `Connect` point (0; before 5.5e-3 m).
- `line_attachments` 8 (continued) and 9: two moving ends, torsion at one or both ends, and a chord above the length, each of which failed on dev; the pinned cable with a clump on a moored body (1e-9 m; before 2.9e-2 m).
- `hermite_static_current_gradient` 1-5, `nodal_twist_dynamic` (carry spin).

## Checks

- Full ctest (Release): 344 of 344 pass (also after the review fixes; base now dev 1a8a606, #76 touched only CI and docs). On the checked Debug build (`-fcheck=all`) the added and touched tests and their neighbours pass, 12 of 12: `static_dry_weight`, `line_attachments`, `hermite_static_current_gradient`, `nodal_twist_dynamic`, `hermite_cable_static`, `hermite_torsion_static`, `torsion_attachments`, `torsion_one_end`, `rod_end_torsion`, `clamped_cable_ends`, `cable_between_bodies`, `bodies_rods`.
- pytest `python/tests` and `tests`, with the native parity tests on (`CABLEDYN_TEST_DRIVER`): 2179 passed, 75 skipped.
- ruff check and format are clean. Strict mypy shows only dev's 3 numpy-stub notes. pre-commit and Sphinx `-W` are clean, and no symbol is both in a `PUBLIC` list and declared `PUBLIC`.
- Example A/B against dev 357f9eb: 53 of 53 identical. No example has a line or attachment above the water, a finite-EI line in a profile or grid current, a line as long as its span, or a pinned cable with `ATTACHMENTS` on a body.

Signed-off-by: Jae Hoon Seo <jaehoon.seo@inha.ac.kr>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant