updates

Author: PWRxPSYCHO

_posts/2023-05-17-wifi-pineapple-mk-7-wardriving.md

@@ -35,11 +35,99 @@ There are 2 options that you can use for your GPS module.
 1. A USB GPS dongle
 2. Android phone over Wi-Fi with GPSd Forwarder
 
+# Option 1
+
+Follow the steps belew to setup wardriving with a USB GPS device.
+
+### GPSd
+
+Connect your GPS USB device to your pineapple and verify it is recognized by typing:
+```bash
+lsusb
+```
+
+You should see the following output:
+
+```bash
+Bus 001 Device 005: ID 1546:01a7 u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver
+```
+You can also verify by typing `dmesg | grep ttyACM0`. The output should be the following.
+
+```bash
+[   62.694133] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device
+```
+
+To verify everything is working run the following commands:
+
+```bash
+gpsd /dev/ttyACM0
+```
+This tells gpsd the input source for GPS. If the command executes successfully then you can continue. Then type
+
+```bash
+gpsmon
+```
+
+TThen the output below should appear.
+```bash
+/dev/ttyACM0                  u-blox>
+┌──────────────────────────┐┌─────────────────────────────────────────────────┐
+│Ch PRN  Az  El S/N Flag U ││ECEF Pos:   000000.00m  0000000.00m  0000000.00m │
+│ 0   0 000   0  00 0000   ││ECEF Vel:     -0.00m/s     +0.00m/s     -0.00m/s │
+│ 1   0 000   0  00 0000   ││                                                 │
+│ 2  00 000  00  00 000d Y ││LTP Pos:  00.000000000°  00.000000000°    00.00m │
+│ 3  00  00   0  00 000c   ││LTP Vel:    0.00m/s   0.0°   0.00m/s             │
+│ 4  00  00  00  00 000d Y ││                                                 │
+│ 5  00 000  00  00 000d Y ││Time: 1 01:21:24.00                              │
+│ 6  00 000  00  00 000d Y ││Time GPS: 2264+ 91284.000     Day: 1             │
+│ 7  00  00  00  00 000d Y ││                                                 │
+│ 8  00 000  00  00 000d Y ││Est Pos Err   0.0 m Est Vel Err   0.00m/s        │
+│ 9  00 000  00  00 000d Y ││PRNs:  0 PDOP:  0.0 Fix 0x00 Flags 0xdd          │
+│10 000 000  00   0 0000   │└─────────────────── NAV_SOL ─────────────────────┘
+│11 000 000  00   0 0000   │┌─────────────────────────────────────────────────┐
+│12 000 000  00   0 0000   ││DOP [H]  0.0 [V]  0.0 [P]  0.0 [T]  0.0 [G]  0.0 │
+│13 000   0 -00   0 0000   │└─────────────────── NAV_DOP ─────────────────────┘
+│14 000   0 -00   0 0000   │┌─────────────────────────────────────────────────┐
+│15 000   0 -00   0 0000   ││TOFF:  0.000000000       PPS:      N/A           │
+└────── NAV_SVINFO ────────┘└─────────────────────────────────────────────────┘
+```
+## wardrive.sh script
+
+After you've verified the GPS device is working you can setup the following wardrive.sh script.
+```bash
+#!/bin/bash
+
+pkill gpsd # kill any current gpsd process
+pkill kismet # kill any kismet process
+ifconfig wlan1 down # bring down wlan1
+ifconfig wlan2 down # bring down wlan2
+#ifconfig wlan3 down # if you have the 5GHz module oncomment this line
+
+gpsd -n /dev/ttyACM0 # Set the GPSD input from USB Device
+sleep 1 # wait for a lock
+#gpspipe -w | grep -qm 1 '"mode":3'
+
+UTCDATE=`gpspipe -w | grep -m 1 "TPV" | sed -r 's/.*"time":"([^"]*)".*/\1/' | sed -e 's/^\(.\{10\}\)T\(.\{8\}\).*/\1 \2/'`
+# SET THE PINEAPPLE'S CLOCK
+date -u -s "$UTCDATE"
+
+# LAUNCH KISMET DAEMON
+# If you have the 5Ghz module you will need to add wlan3 to the config
+iwconfig wlan1 mode Monitor
+iwconfig wlan2 mode Monitor 
+kismet -p /root/kismetlogs -t wardirve --override wardrive -c wlan1 -c wlan2
+```
+
+Copy this script to your Wifi Pineapple. After you've copied it over and your Android phone is streaming GPS information over wifi you can begin this script.
+
+`chmod +x <filename>` to make the script executable.
+
+`./<filename>` to run the script
 ## Option 2
 
 Follow the steps below to setup wardriving with an Android Phone.
 
-### GPSd
+### GPSd Forwarder
 ---
 1. Download GPSd Forwarder for Android off of [Google Play](https://play.google.com/store/apps/details?id=io.github.tiagoshibata.gpsdclient) or [F-Droid](https://f-droid.org/packages/io.github.tiagoshibata.gpsdclient/)
 2. Open the app and set the IP address to the address of your pineapple. (Default is 172.16.42.1)