[SushantShidore-Copeland]

Check all that apply

Type of Change

• WWST Certification Request
  • If this is your first time contributing code:
    • I have reviewed the README.md file
    • I have reviewed the CODE_OF_CONDUCT.md file
    • I have signed the CLA
  • I plan on entering a WWST Certification Request or have entered a request through the WWST Certification console at developer.smartthings.com
• Bug fix
• New feature
• Refactor

Checklist

• I have performed a self-review of my code
• I have commented my code in hard-to-understand areas
• I have verified my changes by testing with a device or have communicated a plan for testing
• I am adding new behavior, such as adding a sub-driver, and have added and run new unit tests to cover the new behavior

Description of Change

Adds a new Z-Wave Edge driver for the Sensi Lite ST25Z smart thermostat (Copeland model 1F76U-22ZB), under a new drivers/Copeland/ vendor directory as sensi-st25z-zwave.

Fingerprint confirmed against production hardware: manufacturerId=0x046B, productType=0x0004, productId=0x0002.

Key design points:

• Sub-driver pattern: src/init.lua is a thin wrapper; device-specific logic lives in the thermostat-sensi-st25z sub-driver.
• Staggered init at join time to avoid overwhelming the Z-Wave radio with simultaneous requests.
• Deadband enforcement between heat/cool setpoints (2°F / converted equivalent in °C).
• Wire scale (°F vs °C) is tracked per-device and setpoints are normalized accordingly.

Opened as a draft while WWST Certification console submission status is confirmed; CLA will be signed before merge.

Summary of Completed Tests

Ran the driver's existing Lua integration test suite (22 tests) against this repo's test harness after relocating the driver:

python3 tools/run_driver_tests.py -vv -f sensi-st25z-zwave

Result: 22/22 passing.

Also ran luacheck --config .github/workflows/.luacheckrc drivers/Copeland/sensi-st25z-zwave/ with 0 warnings/errors.

Device-level testing was previously performed against production hardware prior to this submission (see driver history in the originating repo).

Ensured that the code follows coding standards and guidelines from https://developer.smartthings.com/docs/devices/hub-connected/code-formatting-criteria

Completed execution of self test suite with all its tests passed. Refer the attached zip for test results
report_CYTBGJ877N.zip

[SushantShidore-Copeland]

WWST Certification request is not yet submitted. It will be done once the PR is submitted.