Add Copeland Sensi Lite ST25Z Z-Wave thermostat driver

drivers/Copeland/sensi-st25z-zwave/config.yml

@@ -0,0 +1,6 @@
+name: 'Sensi Lite Smart Thermostat Z-Wave'
+packageKey: 'copeland-sensi-st25z-zwave'
+permissions:
+  zwave: {}
+description: "SmartThings driver for the Sensi Lite Smart Thermostat (Z-Wave), model 1F76U-22ZB"
+vendorSupportInformation: "https://support.smartthings.com"

drivers/Copeland/sensi-st25z-zwave/fingerprints.yml

@@ -0,0 +1,7 @@
+zwaveManufacturer:
+  - id: sensi-thermostat-zwave
+    deviceLabel: Sensi Lite Smart Thermostat Z-Wave
+    manufacturerId: 0x046B
+    productType: 0x0004
+    productId: 0x0002
+    deviceProfileName: thermostat-sensi-st25z

drivers/Copeland/sensi-st25z-zwave/profiles/st25z-thermostat.yml

@@ -0,0 +1,45 @@
+name: thermostat-sensi-st25z
+components:
+- id: main
+  capabilities:
+  - id: temperatureMeasurement
+    version: 1
+  - id: relativeHumidityMeasurement
+    version: 1
+  - id: thermostatHeatingSetpoint
+    version: 1
+    config:
+      values:
+        - key: "heatingSetpoint.value"
+          range: [ 6.99, 36.12 ]
+          step: 1
+  - id: thermostatCoolingSetpoint
+    version: 1
+    config:
+      values:
+        - key: "coolingSetpoint.value"
+          range: [ 8.33, 37.23 ]
+          step: 1
+  - id: thermostatMode
+    version: 1
+  - id: thermostatFanMode
+    version: 1
+  - id: thermostatOperatingState
+    version: 1
+    config:
+      values:
+        - key: "thermostatOperatingState.value"
+          enabledValues:
+            - heating
+            - cooling
+            - fan only
+            - idle
+            - pending heat
+            - pending cool
+            - vent economizer
+  - id: battery
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: Thermostat

drivers/Copeland/sensi-st25z-zwave/src/init.lua

@@ -0,0 +1,65 @@
+-- Copyright 2022 SmartThings
+--
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+--
+--     http://www.apache.org/licenses/LICENSE-2.0
+--
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+
+local capabilities = require "st.capabilities"
+--- @type st.zwave.Driver
+local ZwaveDriver = require "st.zwave.driver"
+--- @type st.zwave.defaults
+local defaults = require "st.zwave.defaults"
+--- @type st.zwave.CommandClass
+local cc = require "st.zwave.CommandClass"
+--- @type st.zwave.CommandClass.ThermostatFanMode
+local ThermostatFanMode = (require "st.zwave.CommandClass.ThermostatFanMode")({version=3})
+--- @type st.zwave.CommandClass.ThermostatMode
+local ThermostatMode = (require "st.zwave.CommandClass.ThermostatMode")({version=2})
+
+local function device_added(driver, device)
+  if device:supports_capability_by_id(capabilities.thermostatMode.ID) and
+    device:is_cc_supported(cc.THERMOSTAT_MODE) then
+    device:send(ThermostatMode:SupportedGet({}))
+  end
+  if device:supports_capability_by_id(capabilities.thermostatFanMode.ID) and
+    device:is_cc_supported(cc.THERMOSTAT_FAN_MODE) then
+    device:send(ThermostatFanMode:SupportedGet({}))
+  end
+  device:refresh()
+end
+
+local driver_template = {
+  supported_capabilities = {
+    capabilities.temperatureAlarm,
+    capabilities.temperatureMeasurement,
+    capabilities.thermostatHeatingSetpoint,
+    capabilities.thermostatCoolingSetpoint,
+    capabilities.thermostatOperatingState,
+    capabilities.thermostatMode,
+    capabilities.thermostatFanMode,
+    capabilities.relativeHumidityMeasurement,
+    capabilities.battery,
+    capabilities.powerMeter,
+    capabilities.energyMeter
+  },
+  lifecycle_handlers = {
+    added = device_added
+  },
+  sub_drivers = require("sub_drivers")
+}
+
+defaults.register_for_default_handlers(
+  driver_template,
+  driver_template.supported_capabilities,
+  { native_capability_attrs_enabled = true })
+--- @type st.zwave.Driver
+local thermostat = ZwaveDriver("zwave_thermostat", driver_template)
+thermostat:run()

drivers/Copeland/sensi-st25z-zwave/src/lazy_load_subdriver.lua

@@ -0,0 +1,27 @@
+-- Copyright 2025 SmartThings, Inc.
+--
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+--
+--     http://www.apache.org/licenses/LICENSE-2.0
+--
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+
+return function(sub_driver_name)
+  -- gets the current lua libs api version
+  local ZwaveDriver = require "st.zwave.driver"
+  local version = require "version"
+
+  if version.api >= 16 then
+    return ZwaveDriver.lazy_load_sub_driver_v2(sub_driver_name)
+  elseif version.api >= 9 then
+    return ZwaveDriver.lazy_load_sub_driver(require(sub_driver_name))
+  else
+    return require(sub_driver_name)
+  end
+end

drivers/Copeland/sensi-st25z-zwave/src/sub_drivers.lua

@@ -0,0 +1,5 @@
+local lazy_load_if_possible = require "lazy_load_subdriver"
+local sub_drivers = {
+  lazy_load_if_possible("thermostat-sensi-st25z"),
+}
+return sub_drivers