Battle-tested commands for running a homelab and a high-end AV install — UniFi Access door control, Savant, networking, 3D printing, and home automation, all in one place.
These are the actual commands I reach for on my own gear, collected over years of real installs. Everything site-specific has been pulled out and replaced with placeholders like <UNIFI_GATEWAY_IP> and <API_TOKEN>, so nothing here points at a live network. They're a starting point, not copy-paste-and-go — drop in your own values and test before you run anything against production hardware.
- Browse to the section you need below.
- Each topic file lists commands with a short note on what they do.
- Replace every
<PLACEHOLDER>with your own value. - Test on a non-critical device first.
UniFi/ — 34 commands
Door and gate control via the UniFi Access API, the Dream Machine, cameras, and the scripts that drive them.
Savant/ — 25 commands
Host and processor work — sclibridge, LaunchDaemons, blueprints, and third-party device integrations.
- Host & LaunchDaemons · sclibridge & States · Blueprints & XML Profiles · Device Integrations · Video / go2rtc
Network/ — 17 commands
The networking one-liners I keep reaching for — DNS, ARP, connectivity checks, SSH, and VPN.
3D Printing/ — 20 commands
Creality K1C and K2 Plus settings, OrcaSlicer profiles, and fixes for the usual print problems.
Automation/ — 16 commands
Home automation glue — Sonos chimes, the doorbell bridge, the SIP intercom, video, and Mac shell tricks.
Found a fix or have a sanitized command worth adding? Open an issue or a pull request. Keep all real IPs, tokens, hostnames, and identifiers out — use placeholders.
Distributed under the MIT License. See LICENSE for details.