Skip to content
Draft
Show file tree
Hide file tree
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
23 changes: 16 additions & 7 deletions flow/platforms/asap7/openRoad/pdn/BLOCKS_grid_strategy.tcl
Original file line number Diff line number Diff line change
@@ -1,5 +1,6 @@
# Top level PDN for macros using BLOCK_grid_strategy.tcl
source $::env(SCRIPTS_DIR)/util.tcl
source [file join [file dirname [info script]] ring_offsets.tcl]

####################################
# global connections
Expand All @@ -18,16 +19,24 @@ set_voltage_domain -name {CORE} -power {VDD} -ground {VSS}
define_pdn_grid -name {top} -voltage_domains {CORE} -pins {M6}
add_pdn_stripe -grid {top} -layer {M1} -width {0.018} -pitch {0.54} -offset {0} -followpins
add_pdn_stripe -grid {top} -layer {M2} -width {0.018} -pitch {0.54} -offset {0} -followpins
add_pdn_ring -grid {top} -layers {M5 M6} -widths {0.504 0.544} -spacings {0.096} \
-core_offset {0.504}

add_pdn_stripe -grid {top} -layer {M5} -width {0.12} -spacing {0.072} -pitch {2.16} \
-offset {1.50} -extend_to_core_ring
# The ring on the routing tracks: each wire an odd number of track widths, each
# width plus spacing a whole number of track pitches, and the offsets from the
# core chosen to centre the wires on tracks. M5 is 0.408, a width the LEF allows
# under the 0.48 maximum;
# M6 is 0.288, the one width M6_M5widePWR1p152 makes a V5 bar as wide as.
add_pdn_ring -grid {top} -layers {M5 M6} -widths {0.408 0.288} -spacings {0.072 0.096} \
-core_offsets [asap7_ring_core_offsets M6 0.288 M5 0.408 0.504]
Comment thread
jeffhsu3 marked this conversation as resolved.
Resolved

# Minimum-width M5 straps: a V4 cut is then as wide as its M5 (V4.M5.AUX.2).
# Five times as many as the 0.12 um straps they replace, for the IR drop.
add_pdn_stripe -grid {top} -layer {M5} -width {0.024} -spacing {0.072} -pitch {0.432} \
-offset {1.50} -extend_to_core_ring -snap_to_grid
add_pdn_stripe -grid {top} -layer {M6} -width {0.288} -spacing {0.096} -pitch {4.32} \
-offset {1.504} -extend_to_core_ring
-offset {1.504} -extend_to_core_ring -snap_to_grid

add_pdn_connect -grid {top} -layers {M1 M2}
add_pdn_connect -grid {top} -layers {M2 M5}
# M3 and M4 at minimum width and the M4 pad on the M4 tracks, not on the M2 rails.
add_pdn_connect -grid {top} -layers {M2 M5} -min_width_layers {M3 M4} -ongrid {M4}
add_pdn_connect -grid {top} -layers {M5 M6}

####################################
Expand Down
17 changes: 10 additions & 7 deletions flow/platforms/asap7/openRoad/pdn/BLOCK_grid_strategy.tcl
Original file line number Diff line number Diff line change
@@ -1,4 +1,5 @@
# macro level counterpart to BLOCKS_grid_strategy.tcl
source [file join [file dirname [info script]] ring_offsets.tcl]

####################################
# global connections
Expand All @@ -14,20 +15,22 @@ set_voltage_domain -name {CORE} -power {VDD} -ground {VSS}
####################################
# standard cell grid
# M1 M2 are for follow pin, width derived from PG rail in standard cell
# M5 stripe width rerived from one of width allowed in LEF, offset and pitch
# put stripe on M5 track
# M4 M5 ring follow stripe width
# M5 stripes at minimum width on the M5 tracks: a V4 cut is then as wide as its
# M5 (V4.M5.AUX.2), so the same holds where they meet the M4 ring
# The M4 M5 ring on the routing tracks (see ring_offsets.tcl); its M5 at
# minimum width for the V4s at the ring's corners
####################################
define_pdn_grid -name {top} -voltage_domains {CORE} -pins {M5}

add_pdn_ring -grid {top} -layers {M5 M4} -widths {0.12 0.12} -spacings {0.072} -core_offset {0.084}
add_pdn_ring -grid {top} -layers {M5 M4} -widths {0.024 0.12} -spacings {0.072} \
-core_offsets [asap7_ring_core_offsets M4 0.12 M5 0.024 0.084]
Comment thread
jeffhsu3 marked this conversation as resolved.
Resolved

add_pdn_stripe -grid {top} -layer {M1} -width {0.018} -pitch {0.54} -offset {0} -followpins
add_pdn_stripe -grid {top} -layer {M2} -width {0.018} -pitch {0.54} -offset {0} -followpins

add_pdn_stripe -grid {top} -layer {M5} -width {0.12} -spacing {0.072} -pitch {2.976} -offset {1.5} \
-extend_to_core_ring
add_pdn_stripe -grid {top} -layer {M5} -width {0.024} -spacing {0.072} -pitch {2.976} -offset {1.5} \
-extend_to_core_ring -snap_to_grid

add_pdn_connect -grid {top} -layers {M1 M2}
add_pdn_connect -grid {top} -layers {M2 M5}
add_pdn_connect -grid {top} -layers {M2 M5} -min_width_layers {M3 M4} -ongrid {M4}
add_pdn_connect -grid {top} -layers {M4 M5}
15 changes: 12 additions & 3 deletions flow/platforms/asap7/openRoad/pdn/grid_strategy-M1-M2-M5-M6.tcl
Original file line number Diff line number Diff line change
Expand Up @@ -17,10 +17,19 @@ set_voltage_domain -name {CORE} -power {VDD} -ground {VSS}
define_pdn_grid -name {top} -voltage_domains {CORE} -pins {M6}
add_pdn_stripe -grid {top} -layer {M1} -width {0.018} -pitch {0.54} -offset {0} -followpins
add_pdn_stripe -grid {top} -layer {M2} -width {0.018} -pitch {0.54} -offset {0} -followpins
add_pdn_stripe -grid {top} -layer {M5} -width {0.12} -spacing {0.072} -pitch {5.4} -offset {0.300}
add_pdn_stripe -grid {top} -layer {M6} -width {0.288} -spacing {0.096} -pitch {5.4} -offset {0.513}
# Minimum-width M5 straps on the M5 tracks: a V4 cut is then as wide as its M5
# (V4.M5.AUX.2) and the strap's edges lie on the 24 nm grid (M5.AUX.1, W.4).
# Five times as many as the 0.12 um straps they replace, at a fifth of the
# pitch, so the M5 metal and the M2-to-M5 stacks keep the IR drop down.
add_pdn_stripe -grid {top} -layer {M5} -width {0.024} -spacing {0.072} -pitch {1.08} -offset {0.300} \
-snap_to_grid
add_pdn_stripe -grid {top} -layer {M6} -width {0.288} -spacing {0.096} -pitch {5.4} -offset {0.513} \
-snap_to_grid
add_pdn_connect -grid {top} -layers {M1 M2}
add_pdn_connect -grid {top} -layers {M2 M5}
# The M2-to-M5 stacks: M3 and M4 at minimum width, so each cut is as wide as the
# metal over it (V2.M3.AUX.2), and the M4 pad on the M4 tracks rather than
# centred on the 270 nm M2 rails, which are off M4's 24 nm grid (M4.AUX.1/2).
add_pdn_connect -grid {top} -layers {M2 M5} -min_width_layers {M3 M4} -ongrid {M4}
add_pdn_connect -grid {top} -layers {M5 M6}
####################################
# macro grids
Expand Down
37 changes: 37 additions & 0 deletions flow/platforms/asap7/openRoad/pdn/ring_offsets.tcl
Original file line number Diff line number Diff line change
@@ -0,0 +1,37 @@
# Core offsets {left bottom right top} for an add_pdn_ring on hlayer (horizontal,
# width hwidth) and vlayer (vertical, width vwidth) that centre every ring wire
# on its layer's routing tracks, so its edges also fall on the ASAP7 routing grid.
# Each offset is at least min_offset. The ring's width plus spacing on each
# layer must be a whole number of track pitches for the outer rings to stay on
# the tracks too. Tracks must exist (make_tracks) before this is called.
proc asap7_ring_core_offsets { hlayer hwidth vlayer vwidth min_offset } {
set block [ord::get_db_block]
set tech [ord::get_db_tech]
set core [$block getCoreArea]
set min [ord::microns_to_dbu $min_offset]

set offsets {}
foreach { layer width axis lo hi } [list \
$vlayer $vwidth X [$core xMin] [$core xMax] \
$hlayer $hwidth Y [$core yMin] [$core yMax]] {
set grid [$block findTrackGrid [$tech findLayer $layer]]
lassign [$grid getGridPattern$axis 0] origin count step
set w [ord::microns_to_dbu $width]
# The low edge of a wire centred on a track, modulo the track pitch.
set residue [expr { ($origin - $w / 2) % $step }]

# Low side: the wire's low edge is lo - offset - w.
set edge [expr { $lo - $min - $w }]
set edge [expr { $edge - (($edge - $residue) % $step) }]
set low_offset [expr { $lo - $w - $edge }]

# High side: the wire's low edge is hi + offset.
set edge [expr { $hi + $min }]
set edge [expr { $edge + (($residue - $edge) % $step) }]
set high_offset [expr { $edge - $hi }]

lappend offsets $low_offset $high_offset
}
lassign $offsets left right bottom top
return [lmap v [list $left $bottom $right $top] { ord::dbu_to_microns $v }]
}