From e1cc60e28930721c75ba0b4d6b03f9768496473c Mon Sep 17 00:00:00 2001 From: Matt Liberty Date: Wed, 21 Oct 2026 23:13:48 +0000 Subject: [PATCH] Add SKIP_FLOORPLAN_REPAIR_TIMING The previous REMOVE_ABC_BUFFERS had this as a side-effect. Sometimes the autotuner found to be useful. This restore the possibilty. Signed-off-by: Matt Liberty --- docs/user/FlowVariables.md | 2 ++ flow/scripts/floorplan.tcl | 6 ++++-- flow/scripts/variables.json | 7 +++++++ flow/scripts/variables.yaml | 7 +++++++ 4 files changed, 20 insertions(+), 2 deletions(-) diff --git a/docs/user/FlowVariables.md b/docs/user/FlowVariables.md index 869364d0bc..4d44b0b25b 100644 --- a/docs/user/FlowVariables.md +++ b/docs/user/FlowVariables.md @@ -284,6 +284,7 @@ configuration file. | SKIP_CRIT_VT_SWAP| Do not perform VT swap on critical cells to improve QoR (default: do critical VT swap). This is an additional VT swap on critical cells that remain near the end of setup fixing. If SKIP_VT_SWAP is set to 1, this also disables critical cell VT swap.| | | SKIP_CTS_REPAIR_TIMING| Skipping CTS repair, which can take a long time, can be useful in architectural exploration or when getting CI up and running.| 0| | SKIP_DETAILED_ROUTE| Skips detailed route.| 0| +| SKIP_FLOORPLAN_REPAIR_TIMING| Skipping floorplan repair which sometimes does too much optimization too early.| 0| | SKIP_GATE_CLONING| Do not use gate cloning transform to fix timing violations (default: use gate cloning).| | | SKIP_INCREMENTAL_REPAIR| Skip incremental repair in global route.| 0| | SKIP_LAST_GASP| Do not use last gasp optimization to fix timing violations (default: use gate last gasp).| | @@ -455,6 +456,7 @@ configuration file. - [SETUP_SLACK_MARGIN](#SETUP_SLACK_MARGIN) - [SKIP_BUFFER_REMOVAL](#SKIP_BUFFER_REMOVAL) - [SKIP_CRIT_VT_SWAP](#SKIP_CRIT_VT_SWAP) +- [SKIP_FLOORPLAN_REPAIR_TIMING](#SKIP_FLOORPLAN_REPAIR_TIMING) - [SKIP_GATE_CLONING](#SKIP_GATE_CLONING) - [SKIP_LAST_GASP](#SKIP_LAST_GASP) - [SKIP_PIN_SWAP](#SKIP_PIN_SWAP) diff --git a/flow/scripts/floorplan.tcl b/flow/scripts/floorplan.tcl index bf503963cf..67b5b16564 100644 --- a/flow/scripts/floorplan.tcl +++ b/flow/scripts/floorplan.tcl @@ -151,8 +151,10 @@ if { [env_var_equals SWAP_ARITH_OPERATORS 1] } { log_cmd replace_arith_modules } -# Skip clone & split -repair_timing_helper -setup -skip_last_gasp -sequence "unbuffer,sizeup,swap,vt_swap" +if { !$::env(SKIP_FLOORPLAN_REPAIR_TIMING) } { + # Skip clone & split + repair_timing_helper -setup -skip_last_gasp -sequence "unbuffer,sizeup,swap,vt_swap" +} puts "Default units for flow" report_units diff --git a/flow/scripts/variables.json b/flow/scripts/variables.json index a9874d4477..cb678fa68e 100644 --- a/flow/scripts/variables.json +++ b/flow/scripts/variables.json @@ -1208,6 +1208,13 @@ "final" ] }, + "SKIP_FLOORPLAN_REPAIR_TIMING": { + "default": 0, + "description": "Skipping floorplan repair which sometimes does too much optimization too early.\n", + "stages": [ + "floorplan" + ] + }, "SKIP_GATE_CLONING": { "description": "Do not use gate cloning transform to fix timing violations (default: use gate cloning).\n", "stages": [ diff --git a/flow/scripts/variables.yaml b/flow/scripts/variables.yaml index 86526477c9..62a5bcf355 100644 --- a/flow/scripts/variables.yaml +++ b/flow/scripts/variables.yaml @@ -886,6 +886,13 @@ SKIP_CTS_REPAIR_TIMING: stages: - cts default: 0 +SKIP_FLOORPLAN_REPAIR_TIMING: + description: > + Skipping floorplan repair which sometimes does too much optimization + too early. + stages: + - floorplan + default: 0 ENABLE_PLACE_REPAIR_TIMING: description: > Run repair_timing during the placement resize stage using placement