From bcaac607fa0cd5f15c4ad871d2672c09c0ff2c63 Mon Sep 17 00:00:00 2001 From: Jaehyun Kim Date: Tue, 27 Oct 2026 18:09:52 -0700 Subject: [PATCH 1/2] flow: Add SETUP_REPAIR_PHASES to select repair_timing phases repair_timing selects its setup repair pipeline with -phases, but ORFS had no way to pass it, so a design could not opt into the experimental PARALLEL_EVAL policy. Add SETUP_REPAIR_PHASES, passed as -phases by repair_timing_helper in the same way SETUP_MOVE_SEQUENCE is passed as -sequence. It applies to every repair_timing_helper call (floorplan, place, cts and grt). When unset, repair_timing keeps its default phases, so no design changes. Signed-off-by: Jaehyun Kim --- docs/user/FlowVariables.md | 5 +++++ flow/scripts/util.tcl | 1 + flow/scripts/variables.json | 9 +++++++++ flow/scripts/variables.yaml | 11 +++++++++++ 4 files changed, 26 insertions(+) diff --git a/docs/user/FlowVariables.md b/docs/user/FlowVariables.md index 8d32a9d6ad..5e47afd713 100644 --- a/docs/user/FlowVariables.md +++ b/docs/user/FlowVariables.md @@ -277,6 +277,7 @@ configuration file. | SEAL_GDS| Seal macro to place around the design.| | | SEC_CHECK| Perform a sequential equivalence check between the initial synthesis netlist and final netlist with the Kepler Formal PDR engine. If this fails, report an issue to OpenROAD.| 0| | SETUP_MOVE_SEQUENCE| Passed as -sequence to repair_timing. This should be a string of move keywords separated by commas.| | +| SETUP_REPAIR_PHASES| Passed as -phases to repair_timing. This should be a string of setup repair phase names separated by spaces. Set to PARALLEL_EVAL to repair setup timing with the experimental parallel evaluation policy. When unset, repair_timing runs its default phases.| | | SETUP_SLACK_MARGIN| Specifies a time margin for the slack when fixing setup violations. This option allows you to overfix or underfix(negative value, terminate retiming before 0 or positive slack). See HOLD_SLACK_MARGIN for more details.| 0| | SKIP_ANTENNA_REPAIR| Skips antenna repair entirely.| 0| | SKIP_ANTENNA_REPAIR_POST_DRT| Skips antenna repair post-detailed routing.| 0| @@ -457,6 +458,7 @@ configuration file. - [RTLMP_RPT_DIR](#RTLMP_RPT_DIR) - [RTLMP_WIRELENGTH_WT](#RTLMP_WIRELENGTH_WT) - [SETUP_MOVE_SEQUENCE](#SETUP_MOVE_SEQUENCE) +- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES) - [SETUP_SLACK_MARGIN](#SETUP_SLACK_MARGIN) - [SKIP_BUFFER_REMOVAL](#SKIP_BUFFER_REMOVAL) - [SKIP_CRIT_VT_SWAP](#SKIP_CRIT_VT_SWAP) @@ -516,6 +518,7 @@ configuration file. - [PRE_RESIZE_TCL](#PRE_RESIZE_TCL) - [REPORT_ENDPOINT_SLACK](#REPORT_ENDPOINT_SLACK) - [ROUTING_LAYER_ADJUSTMENT](#ROUTING_LAYER_ADJUSTMENT) +- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES) - [SKIP_REPORT_METRICS](#SKIP_REPORT_METRICS) - [TNS_END_PERCENT](#TNS_END_PERCENT) @@ -540,6 +543,7 @@ configuration file. - [REPORT_CLOCK_SKEW](#REPORT_CLOCK_SKEW) - [REPORT_ENDPOINT_SLACK](#REPORT_ENDPOINT_SLACK) - [SETUP_MOVE_SEQUENCE](#SETUP_MOVE_SEQUENCE) +- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES) - [SETUP_SLACK_MARGIN](#SETUP_SLACK_MARGIN) - [SKIP_BUFFER_REMOVAL](#SKIP_BUFFER_REMOVAL) - [SKIP_CRIT_VT_SWAP](#SKIP_CRIT_VT_SWAP) @@ -571,6 +575,7 @@ configuration file. - [REPORT_ENDPOINT_SLACK](#REPORT_ENDPOINT_SLACK) - [ROUTING_LAYER_ADJUSTMENT](#ROUTING_LAYER_ADJUSTMENT) - [SETUP_MOVE_SEQUENCE](#SETUP_MOVE_SEQUENCE) +- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES) - [SETUP_SLACK_MARGIN](#SETUP_SLACK_MARGIN) - [SKIP_ANTENNA_REPAIR](#SKIP_ANTENNA_REPAIR) - [SKIP_BUFFER_REMOVAL](#SKIP_BUFFER_REMOVAL) diff --git a/flow/scripts/util.tcl b/flow/scripts/util.tcl index 0310f3ca54..065e4e5895 100644 --- a/flow/scripts/util.tcl +++ b/flow/scripts/util.tcl @@ -32,6 +32,7 @@ proc repair_timing_helper { args } { append_env_var additional_args SETUP_SLACK_MARGIN -setup_margin 1 append_env_var additional_args HOLD_SLACK_MARGIN -hold_margin 1 append_env_var additional_args SETUP_MOVE_SEQUENCE -sequence 1 + append_env_var additional_args SETUP_REPAIR_PHASES -phases 1 append_env_var additional_args TNS_END_PERCENT -repair_tns 1 append_env_var additional_args SKIP_PIN_SWAP -skip_pin_swap 0 append_env_var additional_args SKIP_GATE_CLONING -skip_gate_cloning 0 diff --git a/flow/scripts/variables.json b/flow/scripts/variables.json index 2810d1ec80..f5c5c00c26 100644 --- a/flow/scripts/variables.json +++ b/flow/scripts/variables.json @@ -1153,6 +1153,15 @@ "grt" ] }, + "SETUP_REPAIR_PHASES": { + "description": "Passed as -phases to repair_timing. This should be a string of setup repair phase names separated by spaces. Set to PARALLEL_EVAL to repair setup timing with the experimental parallel evaluation policy. When unset, repair_timing runs its default phases.\n", + "stages": [ + "cts", + "floorplan", + "grt", + "place" + ] + }, "SETUP_SLACK_MARGIN": { "default": 0, "description": "Specifies a time margin for the slack when fixing setup violations.\nThis option allows you to overfix or underfix(negative value, terminate\nretiming before 0 or positive slack).\nSee HOLD_SLACK_MARGIN for more details.\n", diff --git a/flow/scripts/variables.yaml b/flow/scripts/variables.yaml index 4d71623a35..d0634da90d 100644 --- a/flow/scripts/variables.yaml +++ b/flow/scripts/variables.yaml @@ -858,6 +858,17 @@ SETUP_MOVE_SEQUENCE: - cts - floorplan - grt +SETUP_REPAIR_PHASES: + description: > + Passed as -phases to repair_timing. This should be a string of setup + repair phase names separated by spaces. Set to PARALLEL_EVAL to repair + setup timing with the experimental parallel evaluation policy. When + unset, repair_timing runs its default phases. + stages: + - cts + - floorplan + - grt + - place SKIP_GATE_CLONING: description: > Do not use gate cloning transform to fix timing violations (default: use From 69cc62ada231c18156ef2ff472d5b94498b78e2c Mon Sep 17 00:00:00 2001 From: Jaehyun Kim Date: Tue, 27 Oct 2026 21:21:05 -0700 Subject: [PATCH 2/2] flow: Enable PARALLEL_EVAL setup repair in 38 designs Set SETUP_REPAIR_PHASES = PARALLEL_EVAL in the 38 designs with the largest final timing gain when every CI design ran the policy, half of the 76 designs in the public and private CI. A CI run with PARALLEL_EVAL enabled for every design was compared against the same ORFS and OpenROAD commits without it. The gain score is the mean of the finish fmax gain and the finish setup TNS reduction (clipped to +-100%). A design was eligible when its TEST flow completed, passed the dashboard QoR check, gained timing, and added no DRC, antenna or hold TNS degradation. rapidus2hp designs are not in this repository and were left out. asap7/gcd-ccs and asap7/riscv32i-mock-sram inherit the setting from the included asap7/gcd and asap7/riscv32i configs. | Rank | Design | Score | fmax | Setup TNS | | ---: | --- | ---: | ---: | ---: | | 1 | sky130hs/jpeg | +50.8 | +3.8% | +97.8% | | 2 | nangate45/bp_be_top | +50.6 | +1.3% | +100.0% | | 3 | gf180/riscv32i | +49.5 | +5.8% | +93.3% | | 4 | gf12/ibex | +49.5 | +0.4% | +98.7% | | 5 | sky130hd/riscv32i | +48.7 | +6.2% | +91.3% | | 6 | ihp-sg13g2/ibex | +47.2 | -1.3% | +95.7% | | 7 | asap7/riscv32i | +40.7 | +0.7% | +80.8% | | 8 | asap7/ibex | +38.9 | -6.2% | +84.0% | | 9 | sky130hs/riscv32i | +37.4 | +1.9% | +72.9% | | 10 | nangate45/bp_multi_top | +36.4 | +0.2% | +72.5% | | 11 | sky130hd/chameleon | +35.1 | +1.0% | +69.1% | | 12 | nangate45/ibex | +34.6 | -5.0% | +74.1% | | 13 | asap7/riscv32i-mock-sram | +27.1 | -0.5% | +54.7% | | 14 | sky130hd/ibex | +26.4 | +7.7% | +45.1% | | 15 | asap7/aes_lvt | +26.0 | +1.1% | +50.9% | | 16 | gf12/aes | +25.4 | +1.3% | +49.5% | | 17 | asap7/chi_async_bridge | +24.4 | +1.0% | +47.8% | | 18 | asap7/aes | +24.2 | +0.4% | +48.0% | | 19 | asap7/uart | +23.7 | +2.5% | +44.8% | | 20 | ihp-sg13g2/gcd | +22.2 | +2.9% | +41.6% | | 21 | nangate45/ariane133 | +21.4 | -2.3% | +45.1% | | 22 | sky130hd/jpeg | +21.2 | +1.3% | +41.1% | | 23 | gf12/tinyRocket | +20.4 | +3.9% | +36.8% | | 24 | sky130hs/aes | +18.3 | +1.7% | +35.0% | | 25 | asap7/gcd-ccs | +16.3 | +1.4% | +31.1% | | 26 | sky130hs/ibex | +11.7 | +3.3% | +20.0% | | 27 | nangate45/aes | +10.2 | +0.0% | +20.3% | | 28 | nangate45/tinyRocket | +9.4 | +0.8% | +17.9% | | 29 | gf180/ibex | +8.4 | -0.4% | +17.1% | | 30 | ihp-sg13g2/riscv32i | +8.0 | +6.6% | +9.4% | | 31 | sky130hd/aes | +7.5 | +0.7% | +14.3% | | 32 | asap7/ethmac_lvt | +7.3 | +0.1% | +14.5% | | 33 | nangate45/dynamic_node | +7.0 | +7.4% | +6.6% | | 34 | sky130hd/gcd | +5.7 | +3.0% | +8.5% | | 35 | gf180/aes-hybrid | +4.4 | +1.0% | +7.7% | | 36 | asap7/jpeg | +3.7 | +0.4% | +7.0% | | 37 | nangate45/cva6 | +3.7 | -3.2% | +10.6% | | 38 | asap7/gcd | +2.4 | +0.9% | +4.0% | Signed-off-by: Jaehyun Kim --- flow/designs/asap7/aes/config.mk | 1 + flow/designs/asap7/aes_lvt/config.mk | 1 + flow/designs/asap7/chi_async_bridge/config.mk | 1 + flow/designs/asap7/ethmac_lvt/config.mk | 1 + flow/designs/asap7/gcd/config.mk | 1 + flow/designs/asap7/ibex/config.mk | 1 + flow/designs/asap7/jpeg/config.mk | 1 + flow/designs/asap7/riscv32i/config.mk | 1 + flow/designs/asap7/uart/config.mk | 1 + flow/designs/gf12/aes/config.mk | 1 + flow/designs/gf12/ibex/config.mk | 1 + flow/designs/gf12/tinyRocket/config.mk | 1 + flow/designs/gf180/aes-hybrid/config.mk | 1 + flow/designs/gf180/ibex/config.mk | 1 + flow/designs/gf180/riscv32i/config.mk | 1 + flow/designs/ihp-sg13g2/gcd/config.mk | 1 + flow/designs/ihp-sg13g2/ibex/config.mk | 1 + flow/designs/ihp-sg13g2/riscv32i/config.mk | 1 + flow/designs/nangate45/aes/config.mk | 1 + flow/designs/nangate45/ariane133/config.mk | 1 + flow/designs/nangate45/bp_be_top/config.mk | 1 + flow/designs/nangate45/bp_multi_top/config.mk | 1 + flow/designs/nangate45/cva6/config.mk | 1 + flow/designs/nangate45/dynamic_node/config.mk | 1 + flow/designs/nangate45/ibex/config.mk | 1 + flow/designs/nangate45/tinyRocket/config.mk | 1 + flow/designs/sky130hd/aes/config.mk | 1 + flow/designs/sky130hd/chameleon/config.mk | 1 + flow/designs/sky130hd/gcd/config.mk | 1 + flow/designs/sky130hd/ibex/config.mk | 1 + flow/designs/sky130hd/jpeg/config.mk | 1 + flow/designs/sky130hd/riscv32i/config.mk | 1 + flow/designs/sky130hs/aes/config.mk | 1 + flow/designs/sky130hs/ibex/config.mk | 1 + flow/designs/sky130hs/jpeg/config.mk | 1 + flow/designs/sky130hs/riscv32i/config.mk | 1 + 36 files changed, 36 insertions(+) diff --git a/flow/designs/asap7/aes/config.mk b/flow/designs/asap7/aes/config.mk index ec3f9016cf..8112157a80 100644 --- a/flow/designs/asap7/aes/config.mk +++ b/flow/designs/asap7/aes/config.mk @@ -11,6 +11,7 @@ export CORE_ASPECT_RATIO = 1 export CORE_MARGIN = 2 export PLACE_DENSITY = 0.65 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export GPL_PLACE_IOS = 1 ifeq ($(FLOW_VARIANT),top) diff --git a/flow/designs/asap7/aes_lvt/config.mk b/flow/designs/asap7/aes_lvt/config.mk index aa5a147286..e9bde4f8fd 100644 --- a/flow/designs/asap7/aes_lvt/config.mk +++ b/flow/designs/asap7/aes_lvt/config.mk @@ -13,6 +13,7 @@ export CORE_ASPECT_RATIO = 1 export CORE_MARGIN = 2 export PLACE_DENSITY = 0.65 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export ASAP7_USE_VT = LVT diff --git a/flow/designs/asap7/chi_async_bridge/config.mk b/flow/designs/asap7/chi_async_bridge/config.mk index 1f9e2cda64..e8691faa2d 100644 --- a/flow/designs/asap7/chi_async_bridge/config.mk +++ b/flow/designs/asap7/chi_async_bridge/config.mk @@ -37,3 +37,4 @@ export VERILOG_TOP_PARAMS = REQ_W 32 RSP_W 16 DAT_W 64 SNP_W 24 DEPTH 4 else ifeq ($(FLOW_VARIANT),medium) export VERILOG_TOP_PARAMS = DEPTH 4 endif +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/asap7/ethmac_lvt/config.mk b/flow/designs/asap7/ethmac_lvt/config.mk index b670d5c453..eee9cdc19a 100644 --- a/flow/designs/asap7/ethmac_lvt/config.mk +++ b/flow/designs/asap7/ethmac_lvt/config.mk @@ -17,3 +17,4 @@ export ASAP7_USE_VT = LVT export RECOVER_POWER = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/asap7/gcd/config.mk b/flow/designs/asap7/gcd/config.mk index 6c6ea2046a..f8567e0ba9 100644 --- a/flow/designs/asap7/gcd/config.mk +++ b/flow/designs/asap7/gcd/config.mk @@ -18,3 +18,4 @@ export GPL_PLACE_IOS = 1 export SKIP_LAST_GASP ?= 1 export SYNTH_USE_SYN = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/asap7/ibex/config.mk b/flow/designs/asap7/ibex/config.mk index 419c77f8c3..c66b82f84d 100644 --- a/flow/designs/asap7/ibex/config.mk +++ b/flow/designs/asap7/ibex/config.mk @@ -27,6 +27,7 @@ export PLACE_DENSITY_LB_ADDON = 0.20 export ENABLE_DPO = 0 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 diff --git a/flow/designs/asap7/jpeg/config.mk b/flow/designs/asap7/jpeg/config.mk index a711b732d2..3cc90bee69 100644 --- a/flow/designs/asap7/jpeg/config.mk +++ b/flow/designs/asap7/jpeg/config.mk @@ -14,6 +14,7 @@ export CORE_MARGIN = 2 export PLACE_DENSITY = 0.75 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export GPL_PLACE_IOS = 1 export SYNTH_USE_SYN = 1 diff --git a/flow/designs/asap7/riscv32i/config.mk b/flow/designs/asap7/riscv32i/config.mk index cfb6ed6adb..a0f0ff033b 100644 --- a/flow/designs/asap7/riscv32i/config.mk +++ b/flow/designs/asap7/riscv32i/config.mk @@ -23,6 +23,7 @@ export IO_CONSTRAINTS = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/io.tcl export RTLMP_MIN_CHANNEL_SIZE = 8 8 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export CTS_CLUSTER_SIZE = 10 export CTS_CLUSTER_DIAMETER = 50 diff --git a/flow/designs/asap7/uart/config.mk b/flow/designs/asap7/uart/config.mk index 2f9e4b7d94..9b5fc83c25 100644 --- a/flow/designs/asap7/uart/config.mk +++ b/flow/designs/asap7/uart/config.mk @@ -14,6 +14,7 @@ export GPL_PLACE_IOS = 1 export DIE_AREA = 0 0 17 17 export CORE_AREA = 1.08 1.08 16 16 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export SKIP_GATE_CLONING = 1 export VERILOG_TOP_PARAMS = DATA_WIDTH 8 export SYNTH_HDL_FRONTEND = slang diff --git a/flow/designs/gf12/aes/config.mk b/flow/designs/gf12/aes/config.mk index fa0695bf0f..da0a181b20 100644 --- a/flow/designs/gf12/aes/config.mk +++ b/flow/designs/gf12/aes/config.mk @@ -20,3 +20,4 @@ endif export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/gf12/ibex/config.mk b/flow/designs/gf12/ibex/config.mk index 97ca1254c3..bcc6f5eb11 100644 --- a/flow/designs/gf12/ibex/config.mk +++ b/flow/designs/gf12/ibex/config.mk @@ -23,3 +23,4 @@ export DESIGN_TYPE = CELL else export DESIGN_TYPE = CELL_NODEN endif +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/gf12/tinyRocket/config.mk b/flow/designs/gf12/tinyRocket/config.mk index 7863269420..4561b38681 100644 --- a/flow/designs/gf12/tinyRocket/config.mk +++ b/flow/designs/gf12/tinyRocket/config.mk @@ -39,3 +39,4 @@ endif export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/gf180/aes-hybrid/config.mk b/flow/designs/gf180/aes-hybrid/config.mk index 7da1e35827..6ad7c10e6e 100644 --- a/flow/designs/gf180/aes-hybrid/config.mk +++ b/flow/designs/gf180/aes-hybrid/config.mk @@ -42,3 +42,4 @@ export DESIGN_TYPE = CELL else export DESIGN_TYPE = CELL_NODEN endif +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/gf180/ibex/config.mk b/flow/designs/gf180/ibex/config.mk index d41d237edd..dfb4d78e38 100644 --- a/flow/designs/gf180/ibex/config.mk +++ b/flow/designs/gf180/ibex/config.mk @@ -18,3 +18,4 @@ export PLACE_DENSITY_LB_ADDON = 0.1 export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/gf180/riscv32i/config.mk b/flow/designs/gf180/riscv32i/config.mk index ce87ddef68..958598e1ee 100644 --- a/flow/designs/gf180/riscv32i/config.mk +++ b/flow/designs/gf180/riscv32i/config.mk @@ -8,6 +8,7 @@ export SDC_FILE = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint. export CORE_UTILIZATION = 55 export PLACE_DENSITY_LB_ADDON = 0.2 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export SKIP_GATE_CLONING = 1 export PLACE_PINS_ARGS = -min_distance 5 export IO_CONSTRAINTS = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/io.tcl diff --git a/flow/designs/ihp-sg13g2/gcd/config.mk b/flow/designs/ihp-sg13g2/gcd/config.mk index a3d8798bbc..788f1bfffa 100644 --- a/flow/designs/ihp-sg13g2/gcd/config.mk +++ b/flow/designs/ihp-sg13g2/gcd/config.mk @@ -9,6 +9,7 @@ export USE_FILL = 1 export PLACE_DENSITY ?= 0.88 export CORE_UTILIZATION = 20 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 diff --git a/flow/designs/ihp-sg13g2/ibex/config.mk b/flow/designs/ihp-sg13g2/ibex/config.mk index 7f3e9f4fc7..789cbd478a 100644 --- a/flow/designs/ihp-sg13g2/ibex/config.mk +++ b/flow/designs/ihp-sg13g2/ibex/config.mk @@ -18,6 +18,7 @@ export ADDER_MAP_FILE := export CORE_UTILIZATION = 70 export PLACE_DENSITY_LB_ADDON = 0.2 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export CTS_BUF_DISTANCE = 60 export SWAP_ARITH_OPERATORS = 1 diff --git a/flow/designs/ihp-sg13g2/riscv32i/config.mk b/flow/designs/ihp-sg13g2/riscv32i/config.mk index 356106b551..4aa59f484d 100644 --- a/flow/designs/ihp-sg13g2/riscv32i/config.mk +++ b/flow/designs/ihp-sg13g2/riscv32i/config.mk @@ -10,6 +10,7 @@ export USE_FILL = 1 export CORE_UTILIZATION = 60 export PLACE_DENSITY_LB_ADDON = 0.2 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export CTS_BUF_DISTANCE = 60 export SWAP_ARITH_OPERATORS = 1 diff --git a/flow/designs/nangate45/aes/config.mk b/flow/designs/nangate45/aes/config.mk index 2f7d50ef09..24a1b5d012 100644 --- a/flow/designs/nangate45/aes/config.mk +++ b/flow/designs/nangate45/aes/config.mk @@ -9,6 +9,7 @@ export FLOORPLAN_DEF = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/aes_ng45_fp export PLACE_DENSITY_LB_ADDON = 0.20 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL # workaround for high congestion in post-grt repair export SKIP_INCREMENTAL_REPAIR = 1 diff --git a/flow/designs/nangate45/ariane133/config.mk b/flow/designs/nangate45/ariane133/config.mk index 97ae1e77f7..2daa782059 100644 --- a/flow/designs/nangate45/ariane133/config.mk +++ b/flow/designs/nangate45/ariane133/config.mk @@ -29,3 +29,4 @@ export RTLMP_MAX_INST = 80000 export RTLMP_MIN_INST = 8000 export GPL_RANDOM_SEED = 3 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/nangate45/bp_be_top/config.mk b/flow/designs/nangate45/bp_be_top/config.mk index 28e3e2a6ad..3b623cce36 100644 --- a/flow/designs/nangate45/bp_be_top/config.mk +++ b/flow/designs/nangate45/bp_be_top/config.mk @@ -24,6 +24,7 @@ export RTLMP_MIN_CHANNEL_SIZE = 20 20 export PLACE_DENSITY_LB_ADDON = 0.10 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export CTS_CLUSTER_SIZE = 30 export CTS_CLUSTER_DIAMETER = 50 diff --git a/flow/designs/nangate45/bp_multi_top/config.mk b/flow/designs/nangate45/bp_multi_top/config.mk index f4906828fa..e2736092ba 100644 --- a/flow/designs/nangate45/bp_multi_top/config.mk +++ b/flow/designs/nangate45/bp_multi_top/config.mk @@ -36,3 +36,4 @@ export SKIP_GATE_CLONING = 1 export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/nangate45/cva6/config.mk b/flow/designs/nangate45/cva6/config.mk index 46216584f0..575ba20417 100644 --- a/flow/designs/nangate45/cva6/config.mk +++ b/flow/designs/nangate45/cva6/config.mk @@ -104,3 +104,4 @@ export SYNTH_CANONICALIZE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NAME)/canoni export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/nangate45/dynamic_node/config.mk b/flow/designs/nangate45/dynamic_node/config.mk index 37530d83b7..493001c412 100644 --- a/flow/designs/nangate45/dynamic_node/config.mk +++ b/flow/designs/nangate45/dynamic_node/config.mk @@ -12,6 +12,7 @@ export CORE_MARGIN = 5 export PLACE_DENSITY_LB_ADDON = 0.20 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export GPL_PLACE_IOS = 1 export SWAP_ARITH_OPERATORS = 1 diff --git a/flow/designs/nangate45/ibex/config.mk b/flow/designs/nangate45/ibex/config.mk index 76205ee0fe..1b30aa0ece 100644 --- a/flow/designs/nangate45/ibex/config.mk +++ b/flow/designs/nangate45/ibex/config.mk @@ -15,5 +15,6 @@ export SDC_FILE = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint. export CORE_UTILIZATION ?= 50 export PLACE_DENSITY_LB_ADDON = 0.20 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export GPL_PLACE_IOS = 1 diff --git a/flow/designs/nangate45/tinyRocket/config.mk b/flow/designs/nangate45/tinyRocket/config.mk index d86621ba34..dd076c7298 100644 --- a/flow/designs/nangate45/tinyRocket/config.mk +++ b/flow/designs/nangate45/tinyRocket/config.mk @@ -21,3 +21,4 @@ export CORE_UTILIZATION = 60 export CORE_ASPECT_RATIO = 1 export CORE_MARGIN = 2 export PLACE_DENSITY = 0.75 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/sky130hd/aes/config.mk b/flow/designs/sky130hd/aes/config.mk index 3f095cd981..f69ac66aeb 100644 --- a/flow/designs/sky130hd/aes/config.mk +++ b/flow/designs/sky130hd/aes/config.mk @@ -13,6 +13,7 @@ export CORE_MARGIN = 2 export PLACE_DENSITY_LB_ADDON = 0.2 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl diff --git a/flow/designs/sky130hd/chameleon/config.mk b/flow/designs/sky130hd/chameleon/config.mk index 6bbe14781d..471431dc90 100644 --- a/flow/designs/sky130hd/chameleon/config.mk +++ b/flow/designs/sky130hd/chameleon/config.mk @@ -48,5 +48,6 @@ export ADDITIONAL_LEFS = $(DESIGN_DIR)/lef/apb_sys_0.lef \ export FP_PDN_RAIL_WIDTH = 0.48 export FP_PDN_RAIL_OFFSET = 0 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export RTLMP_MIN_CHANNEL_SIZE = 70 70 diff --git a/flow/designs/sky130hd/gcd/config.mk b/flow/designs/sky130hd/gcd/config.mk index 40784a9535..8fbf6b530a 100644 --- a/flow/designs/sky130hd/gcd/config.mk +++ b/flow/designs/sky130hd/gcd/config.mk @@ -9,5 +9,6 @@ export ADDER_MAP_FILE := export CORE_UTILIZATION = 38 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export SWAP_ARITH_OPERATORS = 1 export OPENROAD_HIERARCHICAL = 1 diff --git a/flow/designs/sky130hd/ibex/config.mk b/flow/designs/sky130hd/ibex/config.mk index 76c8b14dd0..6014ce6255 100644 --- a/flow/designs/sky130hd/ibex/config.mk +++ b/flow/designs/sky130hd/ibex/config.mk @@ -18,6 +18,7 @@ export ADDER_MAP_FILE := export CORE_UTILIZATION = 50 export PLACE_DENSITY_LB_ADDON = 0.25 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl diff --git a/flow/designs/sky130hd/jpeg/config.mk b/flow/designs/sky130hd/jpeg/config.mk index 3b86ccc548..7ece1345a3 100644 --- a/flow/designs/sky130hd/jpeg/config.mk +++ b/flow/designs/sky130hd/jpeg/config.mk @@ -9,5 +9,6 @@ export SDC_FILE = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint. export CORE_UTILIZATION = 50 export PLACE_DENSITY_LB_ADDON = 0.15 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl diff --git a/flow/designs/sky130hd/riscv32i/config.mk b/flow/designs/sky130hd/riscv32i/config.mk index 3b1c3d064b..51f5d14291 100644 --- a/flow/designs/sky130hd/riscv32i/config.mk +++ b/flow/designs/sky130hd/riscv32i/config.mk @@ -11,3 +11,4 @@ export PLACE_DENSITY_LB_ADDON = 0.2 #export SWAP_ARITH_OPERATORS = 1 #export OPENROAD_HIERARCHICAL = 1 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL diff --git a/flow/designs/sky130hs/aes/config.mk b/flow/designs/sky130hs/aes/config.mk index 2bbd8c38eb..6989c90124 100644 --- a/flow/designs/sky130hs/aes/config.mk +++ b/flow/designs/sky130hs/aes/config.mk @@ -11,6 +11,7 @@ export CORE_MARGIN = 2 export PLACE_DENSITY_LB_ADDON = 0.25 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export GPL_PLACE_IOS = 1 export CTS_CLUSTER_SIZE = 10 diff --git a/flow/designs/sky130hs/ibex/config.mk b/flow/designs/sky130hs/ibex/config.mk index 12be88cdb5..3f1f629abc 100644 --- a/flow/designs/sky130hs/ibex/config.mk +++ b/flow/designs/sky130hs/ibex/config.mk @@ -15,5 +15,6 @@ export SDC_FILE = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint. export CORE_UTILIZATION = 60 export PLACE_DENSITY_LB_ADDON = 0.20 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export GPL_PLACE_IOS = 1 diff --git a/flow/designs/sky130hs/jpeg/config.mk b/flow/designs/sky130hs/jpeg/config.mk index 22fca150ee..90cd851ed5 100644 --- a/flow/designs/sky130hs/jpeg/config.mk +++ b/flow/designs/sky130hs/jpeg/config.mk @@ -13,6 +13,7 @@ export CORE_MARGIN = 2 export PLACE_DENSITY_LB_ADDON = 0.25 export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export CTS_CLUSTER_SIZE = 30 export CTS_CLUSTER_DIAMETER = 50 diff --git a/flow/designs/sky130hs/riscv32i/config.mk b/flow/designs/sky130hs/riscv32i/config.mk index 232ab3fbed..22049cadbf 100644 --- a/flow/designs/sky130hs/riscv32i/config.mk +++ b/flow/designs/sky130hs/riscv32i/config.mk @@ -10,6 +10,7 @@ export PLACE_DENSITY_LB_ADDON = 0.1 # many east pins cause global routing congestion export PLACE_PINS_ARGS=-min_distance 6 -min_distance_in_tracks export TNS_END_PERCENT = 100 +export SETUP_REPAIR_PHASES = PARALLEL_EVAL export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl