3434
3535> _ k<sub >d</sub >_ = erodibility coefficient
3636> &tau ; = hydraulic shear stress
37- > &tau ; <sub >c</sub > = critical shear stress
37+ > &tau ; <sub >c</sub > = critical shear stress
3838
3939The hydraulic shear stress (_ &tau ; _ ) on the surface of a circular pipe can be estimated using <EquationReference equationKey = " equation-2" /> (see the
4040[ Cylindrical Pipe] ( /docs/toolbox-technical-manuals/internal-erosion-suite/concentrated-leak-erosion-initiation/v1.0/cylindrical-pipe ) section of the
4646
4747> &gamma ; <sub >w</sub >= unit weight of water
4848> _ i_ = hydraulic gradient across the embankment core
49- > _ D_ = diameter of the pipe
49+ > _ D_ = diameter of the pipe
5050
5151<FigReference figKey = " figure-8" /> shows the approximate time for a concentrated leak pipe in an embankment to enlarge from 1 inch (25 millimeters) to
52523 feet (1 meter) in diameter as a function of erosion resistance and hydraulic gradient based on Hole Erosion Test (HET) results and the following
@@ -69,7 +69,7 @@ only 100 to 500 hours (4 days to 3 weeks). The approximate time to erode to 6 fe
6969
7070<Figure
7171 figKey = " figure-8"
72- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure8.png"
72+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure8.png"
7373 alt = " Approximate time for pipe to enlarge to 3-foot diameter (adapted from Fell et al. 2008)."
7474 caption = {
7575 <>
9393> &psi ; <sub >t</sub > = surface area of the pipe at time t
9494> <EquationNoRef equation = " \frac{dV_t}{dt}" /> = rate of soil volume removal during erosion at time t
9595> _ k<sub >d</sub >_ = erodibility coefficient
96- > &tau ; <sub >c</sub > = critical hydraulic shear stress
96+ > &tau ; <sub >c</sub > = critical hydraulic shear stress
9797
9898The surface area of the pipe at any given time is equal to the wetted perimeter (_ P<sub >w</sub >_ ) multiplied by the length of the pipe
9999(_ L_ ), as shown in <EquationReference equationKey = " equation-4" />.
@@ -102,7 +102,7 @@ The surface area of the pipe at any given time is equal to the wetted perimeter
102102
103103where:
104104
105- > _ D<sub >t</sub >_ = pipe diameter at time _ t_
105+ > _ D<sub >t</sub >_ = pipe diameter at time _ t_
106106
107107Combining <EquationReference equationKey = " equation-3" /> and <EquationReference equationKey = " equation-4" /> and dividing by _ L_ obtains the erosion
108108loss per unit length, as shown in <EquationReference equationKey = " equation-5" /> and <EquationReference equationKey = " equation-6" />.
@@ -145,12 +145,11 @@ the pipe diameter at failure is equal to the difference between the crest elevat
145145
146146<Figure
147147 figKey = " figure-9"
148- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure9.png"
148+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure9.png"
149149 alt = " Failure criterion for gross enlargement of a pipe (adapted from Visser et al. 2013)."
150150 caption = {
151151 <>
152- Failure criterion for gross enlargement of a pipe (adapted from Visser et al. 2013){ " " }
153- <Citation citationKey = " Visser2013" />.
152+ Failure criterion for gross enlargement of a pipe (adapted from Visser et al. 2013) <Citation citationKey = " Visser2013" />.
154153 </>
155154 }
156155 width = " 40%"
@@ -163,7 +162,7 @@ represent a triangular distribution, a probabilistic analysis is not performed.
163162
164163<Figure
165164 figKey = " figure-10"
166- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure10.png"
165+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure10.png"
167166 alt = " Step 1 of Gross Enlargement worksheet: Pipe diameter characterization."
168167 caption = " Step 1 of Gross Enlargement worksheet: Pipe diameter characterization."
169168/>
@@ -177,7 +176,7 @@ Erodibility Parameters Toolbox contains empirical relationships and published va
177176
178177<Figure
179178 figKey = " figure-11"
180- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure11.png"
179+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure11.png"
181180 alt = " Step 2 of Gross Enlargement worksheet: Erodibility parameters."
182181 caption = " Step 2 of Gross Enlargement worksheet: Erodibility parameters."
183182/>
@@ -191,7 +190,7 @@ elevation, the upstream hydraulic head (_H_<sub>1</sub>) is zero; if the tailwat
191190
192191<Figure
193192 figKey = " figure-12"
194- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure12.png"
193+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure12.png"
195194 alt = " Step 3 of Gross Enlargement worksheet: Hydraulic gradient."
196195 caption = " Step 3 of Gross Enlargement worksheet: Hydraulic gradient."
197196/>
@@ -213,7 +212,7 @@ predicted, and the pipe diameter increases with time. The rate of pipe enlargeme
213212
214213<Figure
215214 figKey = " figure-13"
216- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure13.png"
215+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure13.png"
217216 alt = " Step 4 of Gross Enlargement worksheet: Time to failure input."
218217 caption = " Step 4 of Gross Enlargement worksheet: Time to failure input."
219218/>
@@ -228,7 +227,7 @@ estimated pipe diameters at failure from step 1 is provided under each plot.
228227
229228<Figure
230229 figKey = " figure-14"
231- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure14.png"
230+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure14.png"
232231 alt = " Step 4 of Gross Enlargement worksheet: Graphical output."
233232 caption = " Step 4 of Gross Enlargement worksheet: Graphical output."
234233/>
@@ -237,7 +236,7 @@ estimated pipe diameters at failure from step 1 is provided under each plot.
237236
238237<Figure
239238 figKey = " figure-15"
240- src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.0 \figures\figure15.png"
239+ src = " figures\toolbox-technical-manuals\internal-erosion-suite\breach\v1.1 \figures\figure15.png"
241240 alt = " Step 4 of Gross Enlargement worksheet: Plot options."
242241 caption = " Step 4 of Gross Enlargement worksheet: Plot options."
243242/>
0 commit comments