@@ -93,9 +93,14 @@ Even though the board supports eMMC, at the moment only SD card booting is suppo
 Flashing aa-proxy will void your warranty, and at this moment there's no way to restore the original firmware.
 :::
 ::: info
-To flash the image, you’ll need to open the case and short two pins to force the device into maskrom mode during startup. Once the device enters this mode (which you can confirm by the different USB device identity), you can use the flashing script provided here to upload the new firmware:
+New devices shipped from the factory no longer require opening the case or shorting the MASKROM and GND pins to enter MaskROM mode.  
+Instead, you can use the button on the device:  
+Hold the button → plug in the USB cable → keep holding the button for 2 seconds → the device enters MaskRom mode.  
+Once the device enters MaskRom mode (which you can confirm by the different USB device identity), you can use the flashing script provided here to upload the new firmware:  
 https://github.com/aa-proxy/buildroot/tree/main/tools/aaw
-::: details You need to short pin MASKROM and GND, click for detailed PCB view
+
+For older devices, or if the button method does not work, you can still open the case and manually short the MASKROM and GND pins during startup to force the device into MaskRom mode:  
+::: details click for detailed PCB view
 ![](images/aaw2b_pcb.png)
 :::
 ::: details Current draw waveforms