Repository navigation
Quick Charge on 2 Parallel SNA5000 #161
|
Hi everyone! I currently have my two luxpower inverters setup in parallel and pulled both into home assistant, getting all the data i need. When using quick charge, which inverter should i trigger this on? Do i need to setup a manual automation for a certain amount of time so that it can trigger a stop aswell? We have some bad weather coming up, and would like to build in some automations to keep my 20KW batteries topped to atleast 50% to ensure reliability for work. Thanks in advance Michael |
Replies: 3 comments
|
Just worried that it would override my default i have set in the luxpower app for things like charge current aswell :) |
|
At least on my LXP that are configured in parallel I send the command to master and both enter in charging mode. On inverter side its just a bit set/clear when it receives the Quick Charge set/command it starts with 60 minutes and you can change it to keep charging or stop earlier. The current / power for charge are the previously configured and also you can change during charge. The start/stop of charge appear to be an in volatile memory only setting, but current/power saved which I did not recommend to make too much changes as there is no public information about how is the tearing of this non volatile memory. |
|
Made a cool dashboard with the Quick Charge options :D Thanks again 
|
At least on my LXP that are configured in parallel I send the command to master and both enter in charging mode.
On inverter side its just a bit set/clear when it receives the Quick Charge set/command it starts with 60 minutes and you can change it to keep charging or stop earlier. The current / power for charge are the previously configured and also you can change during charge.
The start/stop of charge appear to be an in volatile memory only setting, but current/power saved which I did not recommend to make too much changes as there is no public information about how is the tearing of this non volatile memory.