enhanced-simulation-hardware-abstraction-framework/optimized_nanolattice_resolution.json at main · arcticoder/enhanced-simulation-hardware-abstraction-framework · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
{
  "uq_concern_id": "uq_optimization_001",
  "resolution_status": "PARTIAL_RESOLUTION",
  "optimization_results": {
    "young_modulus_TPa": 1.5989420129955452,
    "tensile_strength_GPa": 122.36043311777146,
    "strength_improvement": 103.93405519628578,
    "modulus_improvement": 59.89420129955452,
    "sp2_bond_quality": 0.8807970779346251,
    "manufacturing_feasibility": 0.6065306597096971,
    "target_achievement": {
      "targets_met": false,
      "achieved_strength_boost": 103.93405519628578,
      "achieved_modulus_boost": 59.89420129955452
    }
  },
  "manufacturing_protocol": {
    "cvd_parameters": {
      "temperature_celsius": 820.0000000001936,
      "pressure_torr": 0.14000000000038731,
      "gas_flow_sccm": 85.00000250260621,
      "growth_time_hours": 5.599999999853971
    },
    "lithography_specifications": {
      "feature_size_nm": 300,
      "aspect_ratio": 17.000000500521242,
      "etch_selectivity": 43.99999338561359,
      "pattern_fidelity": 0.9859999999999612
    },
    "quality_control": {
      "sp2_bond_verification": "Raman spectroscopy G/D ratio > 10",
      "dimensional_tolerance": "\u00b15% on 300nm features",
      "mechanical_testing": "Nanoindentation validation required",
      "defect_detection": "SEM inspection at 1000\u00d7 magnification"
    }
  },
  "crew_optimization_readiness": false
}