Shelly Plug US Gen4

[Soidsy]

I am attempting to add a Shelly Plug to track power of my SR800 roaster. The only one I have available in my region (United states) is the Shelly Plug US Gen4. I have been unable to get it to log on Artisan, though I believe I configured it right, but it only logs -1 and provides no errors.

Is this plug not supported? If it's not supported, what is the correct model for the US? It's currently the only logging device listed on my device assignment, and I have no machine selected, if tha tmatters. Everything else I've been logging manually (to change soon...). Any help is appreciated.

Artisan v4.0.2
Shelly Plug US Gen4
Authentication: disabled

Endpoint works in browser. Below is a sample of the RPC output from this plug, for reference (if this is helpful).

{
  "id": 0,
  "source": "WS_in",
  "output": true,
  "apower": 1.1,
  "voltage": 116.6,
  "freq": 60,
  "current": 0.028,
  "aenergy": {
    "total": 0.476,
    "by_minute": [119.094, 0, 0],
    "minute_ts": 1779856440
  },
  "ret_aenergy": {
    "total": 0,
    "by_minute": [0, 0, 0],
    "minute_ts": 1779856440
  },
  "temperature": {
    "tC": 42.6,
    "tF": 108.6
  }
}

[Soidsy]

Well, I think In figured it out. It started working when I set up a logger for my et/bt. In my case a TC4 connection. The shelly works whether or not the logger is plugged in, so I guess the solution would have been to set up fake logger to get shelly to work if you’re a weirdo like me who has that as your only device.