Export/import format mismatch for Probat pilot ver. 1.4.*

[vold029]

Expected Behavior

1. Exported with menu File->Export->Probat Pilot... file can be successfully opened in Probat Pilot Shop roaster software.

2. Imported with menu File->Export->Probat Pilot... file displayed as profile curves in Artisan.

Actual Behavior

1. Get error message when importing file in Probat Pilot Shop roaster software. File exported from Artisan with menu command: File->Export->Probat Pilot...

2. Artisan show clean roaster scope arter menu command File->Export->Probat Pilot...
   "Scope has been reset" message displayed in upper left corner.

Steps to Reproduce the Problem

EXPORT:

1. Record profile in Artisan or create designer
2. Export with menu File->Export->Probat Pilot... to file "test_1.xml"
3. Open Pilot Roaster Shop software version 1.4.1.0
4. Choose Recipes->Import->"test_1.xml"
5. Get error message: "Error during file import! Error while reading recipe test_1.xml: Input string was not in a correct format."

Profile file format has changed in version 1.4.+ Pilot Roaster Shop software.

IMPORT:

1. Choose: File->Export->Probat Pilot...
2. Select file for import (attached as example)
3. Get info message: "Scope has been reset" message displayed in upper left corner. Roaster scope stay empty.

artisan-settings.aset.txt

Exapmle of new format file attached.
100% _0.xml.txt

Specifications

• Artisan Version: 1.3.1
• Artisan Build (number in brackets shown in the about box): 1
• Platform (Mac/Windows/Linux + OS version): Windows 7/64
• Connected devices or roasting machine: Probatone 12.

Please attach your current Artisan settings file (as exported via menu Help >> Save Setings as *.aset) file.
Please attach any relevant Artisan *.alog profiles.

Note that you need either add a .txt extension or zip the files before uploading. Otherwise you will receive a "Not a supported file type" error on uploading.

[MAKOMO]

I updated the Pilot import/export taking your Pilot xml file as guide. This is half-blind as I lack a proper specification of the Pilots file format as well access to the Pilot software. A request to Probat is send. You can check the current v1.4 beta builds on bintray https://bintray.com/artisan/artisan-artifacts/artisan/master#files if those work for you.

[vold029]

Marko, thank you for fast response and provided solution. Please, stay connected and inform me about all Artisan updates . I still keep my eyes on all news. Best regards, Vladimir Klybik 2018-07-12 19:20 GMT+02:00 Marko Luther <notifications@github.com>:

…

I updated the Pilot import/export taking your Pilot xml file as guide. This is half-blind as I lack a proper specification of the Pilots file format as well access to the Pilot software. A request to Probat is send. You can check the current v1.4 beta builds on bintray https://bintray.com/artisan/artisan-artifacts/artisan/master#files if those work for you. [image: screen shot 2018-07-12 at 19 04 02] <https://user-images.githubusercontent.com/13909011/42648943-90882dd2-8608-11e8-87d5-fa5adfd6e94c.png> — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#228 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/Am_qWRgKVP36gCrskG3IywpFJuipGOfPks5uF4VPgaJpZM4VJUgB> .

-- С уважением, Владимир Клыбик

[MAKOMO]

Could you test this on your side and verify that import and export now work as expected? Can I close this issue?

[vold029]

Today I'm done clean install of Artisan 1.4.0, do factory reset configuration after install and get this issues after importing attached test file:

• BT seems to be imported correctly
• Burner level imported not as default "burner" event, but as some type of external event (an also "Extra 2" event). Then I try to switch off display "burner" graph by clearing appropiate check box, it stay on display. See on attached screen_1.png, marked as "1)". Also, you can see this on screen_2.png, where I switch lunguage to "Russian".
• Burner level duplicated as default "Drum" event. See mark "2)" on attached screenshots. As I know, some new Probatone roasters equiped with drum speed controller, but not in our case and I can't see drum speed info in source Probat Pilot xml file.
• "drum" and "burner" events graphs shifted on display vertically one from one. Although, one time (first after Artisan install) I can see two graphs matched exactly, but can't repeat this after.
  artisan-settings.aset.txt
  
  

[MAKOMO]

Dear Vlad,

thanks for testing. Some comments on your findings. The burner level is imported in two ways. First a regular data curve (the black line marked correctly "Burner" in your screenshots) by using one extra device curve. Second, the pure burner changes are import also and generate Artisan Events. Artisan supports 4 of those event channels (disjoint from the standard temperature curves) that can be rename by the user. The Pilot incorrectly imported the events using the 2nd Event channel instead of the last one that is by default named "Burner". I just fixed that one (not commited yet).

The "Burner" curve can be hidden from within the Extra Devices tab (menu Config >> Devices, 2nd tab), where you can also assign a different label. The "Burner" (4) events (currently in your setup the "Drum" (2) events) can be hidden by deactivating the corresponding flags in the Events dialog (and here you can change the name of the events channel as you already discovered).

By default, events are drawn in their own axis system independent of the temperature axis used for the curves. This explains the discrepancy between those two elements in your screen shot. If you tick "snap" in the Events dialog, Event axis are aligned with the temperature axis.

By now I have received some sample files from Probat for testing and also could download the current version of the Shop Pilot. I will test import/export with these and fix errors if I encounter them.

Thanks again for your detailed report!
Marko

[vold029]

Dear Marko, thanks a lot for detailed explanation. Now all behaviour are clear for me. Please, inform me on your next improvements in import/export Probat Pilot files. Best regards, Vladimir 2018-07-13 14:25 GMT+02:00 Marko Luther <notifications@github.com>:

…

Dear Vlad, thanks for testing. Some comments on your findings. The burner level is imported in two ways. First a regular data curve (the black line marked correctly "Burner" in your screenshots) by using one extra device curve. Second, the pure burner changes are import also and generate Artisan Events. Artisan supports 4 of those event channels (disjoint from the standard temperature curves) that can be rename by the user. The Pilot incorrectly imported the events using the 2nd Event channel instead of the last one that is by default named "Burner". I just fixed that one (not commited yet). The "Burner" curve can be hidden from within the Extra Devices tab (menu Config >> Devices, 2nd tab), where you can also assign a different label. The "Burner" (4) events (currently in your setup the "Drum" (2) events) can be hidden by deactivating the corresponding flags in the Events dialog (and here you can change the name of the events channel as you already discovered). By default, events are drawn in their own axis system independent of the temperature axis used for the curves. This explains the discrepancy between those two elements in your screen shot. If you tick "snap" in the Events dialog, Event axis are aligned with the temperature axis. By now I have received some sample files from Probat for testing and also could download the current version of the Shop Pilot. I will test import/export with these and fix errors if I encounter them. Thanks again for your detailed report! Marko — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#228 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/Am_qWb__Zv2cNPod7QfPbcDLsAV9Oin_ks5uGJG5gaJpZM4VJUgB> .

-- С уважением, Владимир Клыбик

[MAKOMO]

Dear Vlad, I applied a last change such that also profiles generated by the designer and exported to Probat Pilot format can be imported successful. Note that recipe files have to be named _.xml (like eg. "Test_1.xml") to be accepted by pilot. I added a corresponding warning popup.