Auto axis calculation triggered on incomplete profile

[MAKOMO]

Expected Behavior

If I open the axis dialog (menu Config >> Axis) tick "Auto" in the "Time Axis" section of the dialog and leave the dialog the axis are computed from the recorded profile. If I do the same during recording of a profile, the auto axis computation should not be performed as the profile is still incomplete.

Actual Behavior

Auto axis computation is computed on leaving the axis dialog while recording, but not while not recording.

Steps to Reproduce the Problem

1. start a recording
2. open the axis dialog, tick Auto under "Time Axis"
3. close the axis dialog

The max time axis limit will be set from the partially recorded profile which is unexpected

Specifications

• Artisan Version: 2.4.0
• Artisan Build (number in brackets shown in the about box):
• Platform (Mac/Windows/Linux + OS version):
• Connected devices or roasting machine:

Please attach your current Artisan settings file (as exported via menu Help >> Save Setings as *.aset) file.
Please attach any relevant Artisan *.alog profiles.

Note that you need either add a .txt extension or zip the files before uploading. Otherwise you will receive a "Not a supported file type" error on uploading.