BT curve and ROR lag

[bolza4]

Hello everyone,

I'm having a hard time tracking, at the same time, the BT curve and the ROR curve on the background.

It seems like I can only align my current roast with the BT curve on the background OR the ROR curve, in other words I have to choose if I wanna track one curve or the other.
If I track the BT curve, I have a delay on the ROR curve, or the other way around.

How can I fix it?
thank you so much :)

matteo

[MAKOMO]

Please attach your smoothing settings here. Thanks!

[bolza4]

there you go! :) thanks.

[bolza4]

Please attach your smoothing settings here. Thanks!

would you say that these smoothing settings I posted above are causing time shifts? thanks a lot :)

[MAKOMO]

Yes. This is caused mostly by the strong curve smoothing here which is not applied to the foreground profile during recording. Turn that to 0 or 1 and the shift is gone. Better use directly a higher delta span for RoR smoothing.

We will limit the amount of curve smoothing in the next version and might remove it completely in a later version also due to those complications.