Support-issued beta firmware for the 8BitDo Ultimate 2C Wireless. It is not
published through the normal update channel, which is the only reason it is
archived here.
Flash it with the instructions in the README. The official
8BitDo updater performs the flash; this project only causes it to use this file
instead of the one it would download.
File
8bitdo-ultimate-2c-wireless_v1.06-beta_model-0x301B.dat
| Size | 74780 bytes |
| SHA-256 | 11c8d195d3ca76da24a33ba92ad9d7ae8ad6f455244864bed4c66898e9074bfb |
| MD5 | d37b73ae276901b0a99232885743bad9 |
| Version | 1.06, beta flag set |
| Model id | 0x301B |
| Flash address | 0x00006000 |
| Payload | 74752 bytes |
Verify before flashing:
shasum -a 256 8bitdo-ultimate-2c-wireless_v1.06-beta_model-0x301B.dat
python3 inspect_firmware.py 8bitdo-ultimate-2c-wireless_v1.06-beta_model-0x301B.datThe model id must match your controller. This file is for model 0x301B only.
Before you flash this
It is version 1.06 while the current official release is 1.09, so this is a
downgrade onto a separate branch. Try official 1.09 first — the updater
installs that on its own, with none of this tooling — and only come back here
if it does not do what you need.
Flashing carries a risk of bricking. Boot mode is entered by holding LB+RB while
connecting USB and does not depend on the installed firmware, so a failed flash
is normally recoverable by flashing again.
Provenance
Issued by 8BitDo support to a user, then archived here. Firmware remains
8BitDo's property; it will be removed on request.