Install Guide AppleTV Ethernet

Now that PlexConnect is started and running it's time to complete the installation by configuring the AppleTV.

• NOTE: The AppleTV must be on the same network as the PlexConnect server.

Ethernet Configuration

1. Choose Settings > General > Network > Ethernet

2. Change the DNS setting from "Automatic" to "Manual".

3. Enter the IP of your PlexConnect server as the DNS.

• Find your PlexConnect IP from the terminal/CMD window that you are using to run PlexConnect.

• Then set the AppleTV's DNS to the PlexConnect IP.

---

[Return to Install Guide] (https://github.com/iBaa/PlexConnect/wiki/Install-Guide)