In INAV-Configurator 9.0.0 the Alignment Tool's sliders are not updated if you manually edit the Value fields.
See this image:
the YAW Value of the magnetometer was modified to 90, but the slider stays at position 0.
It seems that this is an issue for all 6 sliders on the Alignment Tool page
In INAV-Configurator 9.0.0 the Alignment Tool's sliders are not updated if you manually edit the Value fields.
See this image:
the YAW Value of the magnetometer was modified to 90, but the slider stays at position 0.
It seems that this is an issue for all 6 sliders on the Alignment Tool page