List of supported heat pumps

[kr0ner]

Heat Pump Model	thz504.yaml	thz404.yaml	thz304.yaml	thz5_5_eco.yaml	ttf07.yaml	wpl13.yaml	wpl17.yaml
Stiebel Eltron
LWZ 8	confirmed by @hovhannes85
LWZ CS 5 Premium	confirmed by @highdynamic
LWZ 5s plus				confirmed by @Nebnenut
Tecalor
THZ 504	confirmed by @kr0ner
THZ 404 eco		confirmed by @ste-ge
THZ 304 eco			confirmed by @reneschuster
THZ 5.5 eco				confirmed by @Sulik7761
TTF 07 cool					confirmed by @mkaiser

Please leave a comment below if you can confirm that a certain config works for your heat pump model, I will update the table accordingly. Thanks 👍

[reneschuster]

I can confirm THZ 304 eco is working.

Right now I'm using the thz404.yaml.

I have started identifying unknown CAN addresses and integrating them.
When I am done, I will share the information.

[Sulik7761]

I use the THZ 5.5 eco and works

[reneschuster]

@kr0ner It's the Tecalor THZ 304 eco not 403.

[ste-ge]

THZ 404 eco works with thz404.yaml :-)

[Nebnenut]

I have a stiebel eltron lwz 5s plus.

Expand the list?

[mkaiser]

Tecalor TTF 07 cool (shoule be the same as Stiebel Eltron WPC 07 cool) --> ttf07yaml.

works in my branch. Will fix things after your restructuring :)

[highdynamic]

I can confirm it works with Stibel Eltron LWZ CS 5 Premium.

Cooling funtions i have to test in the summer.
But what i have already noticed Heating_day also set the Cooling Day value and Heating_Night the Cooling Night.

[kr0ner]

I can confirm it works with Stibel Eltron LWZ CS 5 Premium.

Cooling funtions i have to test in the summer. But what i have already noticed Heating_day also set the Cooling Day value and Heating_Night the Cooling Night.

which config are you using?

[highdynamic]

I can confirm it works with Stibel Eltron LWZ CS 5 Premium.

Cooling funtions i have to test in the summer. But what i have already noticed Heating_day also set the Cooling Day value and Heating_Night the Cooling Night.

which config are you using?

Thz504.yaml

[aLimp86]

Cooling funtions i have to test in the summer.

Cooling is working with that Heatpump and Thz504.yaml. I already can confirm. The only thing which has to be working is sending of humidity.

[Schmidtjanroman]

Also can confirm THZ 5.5eco

[m2teusz]

Tecalor TTF 07 cool (shoule be the same as Stiebel Eltron WPC 07 cool) --> ttf07yaml.

works in my branch. Will fix things after your restructuring :)

It works but not fully, it does not indicate that the heating mode is working for NHZ... there must be a different address but I don't know how to check it