This action sets up your repository to use NativeLink Cloud for your Bazel build. We primarily set the values in your .bazelrc (creating or appending this as necessary) and assume you're doing the rest of the Bazel setup.

There are two ways to run NativeLink, and this action is written for the first:

• NativeLink Cloud — the managed service at dev.app.nativelink.com. You sign up, you get an account, and the cache and build-event endpoints are hosted for you. Every default in this action assumes this.
• NativeLink Enterprise (on-prem / self-hosted) — NativeLink running inside your own infrastructure, on your own network. See enterprise.nativelink.com.

The action works for a self-hosted deployment too, but none of the defaults will be right: your cache, build-event and scheduler endpoints are your own, so pass cache_url, bes_url and scheduler_url explicitly. Take the values from the NativeLink application for your deployment rather than constructing them.

Three inputs are required — api_key, account and prefix — and all three come from one screen in the NativeLink application. Collect them first, then paste the workflow. Doing it the other way round means editing placeholders in a file you have already committed.

Go to dev.app.nativelink.com and sign up. Once you are in, open Quickstart and select Bazel. You will see a block like this, already filled in with your own values:

build --remote_cache=grpcs://cas-tom-parker-shemilt-y0738m.build-faster.nativelink.net
build --remote_header=x-nativelink-api-key=abc123-your-real-key

Leave that page open. Every value below comes from those two lines.

prefix is your account name plus a short generated suffix, which is why account is the same string with that suffix removed. If you would rather not do it by eye, paste your own --remote_cache line into this and read the answers off:

CAS='grpcs://cas-tom-parker-shemilt-y0738m.build-faster.nativelink.net'  # <- yours

PREFIX=$(printf '%s' "$CAS" | sed -E 's#^grpcs://cas-##; s#\..*$##')
ACCOUNT=$(printf '%s' "$PREFIX" | sed -E 's#-[^-]+$##')
printf 'prefix : %s\naccount: %s\n' "$PREFIX" "$ACCOUNT"

The API key is a credential. It goes in GitHub's secret store, never in the workflow file.

In your repository on GitHub: Settings → Secrets and variables → Actions → New repository secret. Name it exactly NATIVELINK_API_KEY, and paste the api_key value from the table above.

The name has to match exactly, because the workflow below reads secrets.NATIVELINK_API_KEY. A typo here surfaces as an empty key and an authentication failure at build time, not as a workflow error.

In .github/workflows/<your-workflow>.yml, add both entries below to the job that runs your build — the steps: key is GitHub's own workflow syntax, so keep that line as it is and add the two - uses: entries under it. Substitute your own account and prefix; leave the api_key line exactly as written, since it reads the secret you just created.

steps:
  # Other methods of getting Bazel are also usable, but this works well
  - uses: bazel-contrib/setup-bazel@0.15.0
    with:
      # Avoid downloading Bazel every time.
      bazelisk-cache: true
      # Build cache is all in Nativelink
      disk-cache: false
      # Share repository cache between workflows.
      repository-cache: true

  - name: Nativelink setup
    uses: TraceMachina/nativelink-action@v0
    with:
      api_key: ${{ secrets.NATIVELINK_API_KEY }}
      account: tom-parker-shemilt # <- your account
      prefix: tom-parker-shemilt-y0738m # <- your prefix

Commit, push, and let the workflow run. The action writes the cache configuration into .bazelrc before Bazel starts; a second run of the same build should be substantially faster than the first.

Use @v0. It tracks the current release.

Do not use @latest. It looks like it means "the newest version" and does not — it is an ordinary mutable tag that has to be moved by hand, and it currently points at an older commit than v0 does. Earlier revisions of this document recommended it, which is why it appears in workflows that predate this note; change those to @v0.

If you pin by commit SHA instead — the hardened option, and what GitHub recommends for third-party actions — take the SHA from a release rather than from the tip of main.

The action configures remote caching by default. Remote execution is opt-in, and needs the scheduler address for your deployment:

with:
  api_key: ${{ secrets.NATIVELINK_API_KEY }}
  account: tom-parker-shemilt # <- your account
  prefix: tom-parker-shemilt-y0738m # <- your prefix
  scheduler_url: grpcs://... # <- from your NativeLink application

There is deliberately no default. The scheduler address is not derivable from your account prefix and differs between deployments, so a guessed hostname would fail at build time rather than here — take the value from the quickstart settings in your NativeLink application, alongside the cache and API key values above. Leave it unset and you get a cache-only build, with no --remote_executor line written at all.

By default a build carries no trustworthy record of who ran it. Bazel's BUILD_USER is the OS username on the machine, which on a GitHub Actions runner is literally runner, and a workflow author can set it to anything.

Set attribution_url and the action will instead ask GitHub for a token asserting this job's identity, exchange it with NativeLink for an opaque build ticket, and add that ticket to the .bazelrc it writes. NativeLink then shows the GitHub user, repository, branch, commit and pull request on the build — verified against GitHub's signature rather than taken on trust.

permissions:
  id-token: write # required: no token is minted without it
  contents: read

steps:
  - name: Nativelink setup
    uses: TraceMachina/nativelink-action@v0
    with:
      api_key: ${{ secrets.NATIVELINK_API_KEY }}
      account: tom-parker-shemilt # <- your account
      prefix: tom-parker-shemilt-y0738m # <- your prefix
      attribution_url: https://github-app.nativelink.com

Needs v0.0.3 or newer. The attribution inputs arrived in that release, so @v0 is correct only if it has been moved to it — which it has. Referencing an older version does not fail: an unknown input is ignored, so the action runs and configures a perfectly ordinary unattributed build. If attribution silently does not appear, check the version you resolved before looking anywhere else.

Three things worth knowing:

• permissions: id-token: write is required. Without it GitHub mints no token at all, and the action says so rather than failing obscurely. This is by far the most common setup mistake.
• Failure is soft by default. A NativeLink outage, or a repository nobody enabled, costs the build its verified identity and nothing else — the build still runs and still uses the cache. Set fail_on_attribution_error: true if you would rather fail than lose provenance.
• The repository must be enabled in NativeLink under Settings → Repositories. Connecting an organisation makes a repository visible; it stays inert until someone turns it on.

Bazel only for now — --bes_keywords is a Bazel concept and buck2 has no equivalent channel to carry the ticket, so the input is ignored there with a warning.