Tibber Pulse Bridge local polling Export total missing data after long time without changing value

[Angel-Perez-Lopez]

I have experienced that I lose time to time (every other day) the information for Export total (both, in Watts and kW).

The rest of the entities keep updating.

Solution for me is to change the configuration, I change the polling for instance from 2 to 3 seconds and back and then it is again there.

It always happen when the entity has been long time in the same value which is my case in the afternoon that the solar panels produce so little that everything is used and nothing is exported and then if next day is a bit cloudy, nothing might go into the grid for a long time.

I do not know if there is something smart not seeing that value anymore.
Rest of the entities, import and actual power keep the value changing and I do not observe this behavior there.
Maybe I am missing something in the config

[marq24]

Hi...

from my developers point of view this sounds very strange - I wanted to ensure that I picked your question up correctly... So there is ONE Entiy (...0100020800ff_in_k) that some sort of stops updating?

If this is your observation, then let me at least share how the integration is technically working: The app request in the specified update interval "all the data" at once. So all Entities of the integration will receive new values at the same time - so there is no code that updates an single entity... So it would be really surprising, what you observe (when I understood you correctly), that one entity stops receiving new data... If this is really the case, that I would double check your general HA setup...

[Angel-Perez-Lopez]

Hi Matthias,

thanks for the quick answer. Yes, to your question, there is one entity and it does not update anymore. Probably is a wrong config on my side but I would like to get it working.
I attach a couple of screenshots that I did of today. There it can be seen that one entity updates and the other one does not till I change the config, then right away I get it back. I did this today around noon and right away the sensor for Export was working again.

The little gap in the picture below is because at that time I stop my router and start it again few minutes later, the raspberry pi where I run HA also goes off for 10 minutes. Maybe that creates the problem?

I paste here the logs, maybe there is something there

2025-04-09 12:02:47.898 DEBUG (MainThread) [custom_components.tibber_local] Finished fetching tibber_local data in 0.057 seconds (success: True) 2025-04-09 12:02:49.934 INFO (MainThread) [custom_components.tibber_local] CRC while parse data - payload: b'\x1b\x1b\x1b\x1b\x01\x01\x01\x01v\x05\x00\x00\x00\x00b\x00b\x00re\x00\x00\x01\x01v\x01\x01\x05\x00\x00\x00\x00\x0b\n\x01SAG\x00\x01S6_rb\x01e\x02\xd2n\xa4\x01c\x0f}\x00v\x05\x00\x00\x00\x01b\x00b\x00re\x00\x00\x07\x01w\x01\x0b\n\x01SAG \x01S6_\x07\x01\x00b\n\xff\xffrb\x01e\x02\xd2n\xa4yw\x07\x01\x002\x01\x01\x01\x01\x01\x01\x04SAG\x01w\x07\x01\x00\x01\x00\xff\x01\x01\x01\x01\x0b\n\x01SAG \x01S6_\x01w\x07\x01\x00\x01\x08\x00\xffe\x00\x1cA\x04rb\x01e\x02\xd2n\xa4b\x1eR\xffi\x00\x00\x00\x00\x00\x90\xf7F\x01w\x07\x01\x00\x01\x08\x01\xff\x01rb\x01e\x02\xd2n\xa4b\x1eR\xffi\x00\x00\x00\x00\x00]d\xf7\x01w\x07\x01\x00\x01\x08\x02\xff\x01rb\x01e\x02\xd2n\xa4b\x1eR\xffi\x00\x00\x00\x00\x003\x92O\x01w\x07\x01\x00\x02\x08\x00\xff\x01rb\x01e\x02\xd2n\xa4b\x1eR\xffi\x00\x00\x00\x00\x00x\xe2I\x01w\x07\x01\x00\x02\x08\x01\xff\x01rb\x01e\x02\xd2n\xa4b\x1eR\xffi\x00\x00\x00\x00\x00b\xfc\x7f\x01w\x07\x01\x00\x02\x08\x02\xff\x01rb\x01e\x02\xd2n\xa4b\x1eR\xffi\x00\x00\x00\x00\x00\x15\xe5\xca\x01w\x07\x01\x00\x10\x07\x00\xff\x01\x01b\x1bR\x00Y\x00\x00\x00\x00\x00\x00\x06p\x01\x01\x01c\xda\xfe\x00v\x05\x00\x00\x00\x02b\x00b\x00re\x00\x00\x02\x01q\x01c/5\x00\x1b\x1b\x1b\x1b\x1a\x00\xb9\x14' 2025-04-09 12:02:52.501 DEBUG (MainThread) [custom_components.tibber_local] Finished fetching tibber_local data in 2.659 seconds (success: True) 2025-04-09 12:02:54.035 INFO (MainThread) [custom_components.tibber_local] Starting TibberLocal with interval: 0:00:03 - ConfigEntry: {'created_at': '2025-04-01T06:59:26.282451+00:00', 'data': {'host': '<MASKED>', 'id': 'SAG-None', 'mode': 3, 'name': 'tibber', 'node_num': 1, 'password': '<MASKED>', 'scan_interval': 2}, 'discovery_keys': {}, 'disabled_by': None, 'domain': 'tibber_local', 'entry_id': '01JQR2BNEAXQ7G4NQJDF76TTVH', 'minor_version': 1, 'modified_at': '2025-04-09T10:02:52.031243+00:00', 'options': {'host': '<MASKED>', 'ignore_errors': False, 'name': 'tibber', 'node_num': 1, 'password': '<MASKED>', 'scan_interval': 3}, 'pref_disable_new_entities': False, 'pref_disable_polling': False, 'source': 'user', 'subentries': [], 'title': 'tibber', 'unique_id': None, 'version': 1} 2025-04-09 12:02:54.036 INFO (MainThread) [custom_components.tibber_local] restarting TibberLocalBridge integration... for host: '192.168.178.5' node: '1' com_mode: '3' with options: {'ignore_parse_errors': False} 2025-04-09 12:02:54.136 INFO (MainThread) [custom_components.tibber_local] after init - found OBIS entries: '{'010060320101': <obis: 010060320101, value: SAG>, '0100600100ff': <obis: 0100600100ff, value: 0a01534147200153365f>, '0100010800ff': <obis: 0100010800ff, status: 1851652, val_time: 47345318, unit: 30, scaler: -1, value: 9500495>, '0100010801ff': <obis: 0100010801ff, val_time: 47345318, unit: 30, scaler: -1, value: 6120704>, '0100010802ff': <obis: 0100010802ff, val_time: 47345318, unit: 30, scaler: -1, value: 3379791>, '0100020800ff': <obis: 0100020800ff, val_time: 47345318, unit: 30, scaler: -1, value: 7922249>, '0100020801ff': <obis: 0100020801ff, val_time: 47345318, unit: 30, scaler: -1, value: 6487167>, '0100020802ff': <obis: 0100020802ff, val_time: 47345318, unit: 30, scaler: -1, value: 1435082>, '0100100700ff': <obis: 0100100700ff, unit: 27, scaler: 0, value: 1630>}' 2025-04-09 12:02:54.138 INFO (MainThread) [custom_components.tibber_local.sensor] available sensors found: dict_keys(['010060320101', '0100600100ff', '0100010800ff', '0100010801ff', '0100010802ff', '0100020800ff', '0100020801ff', '0100020802ff', '0100100700ff']) 2025-04-09 12:02:56.905 DEBUG (MainThread) [custom_components.tibber_local] Finished fetching tibber_local data in 0.112 seconds (success: True) 2025-04-09 12:03:00.768 INFO (MainThread) [custom_components.tibber_local] Starting TibberLocal with interval: 0:00:02 - ConfigEntry: {'created_at': '2025-04-01T06:59:26.282451+00:00', 'data': {'host': '<MASKED>', 'id': 'SAG-None', 'mode': 3, 'name': 'tibber', 'node_num': 1, 'password': '<MASKED>', 'scan_interval': 2}, 'discovery_keys': {}, 'disabled_by': None, 'domain': 'tibber_local', 'entry_id': '01JQR2BNEAXQ7G4NQJDF76TTVH', 'minor_version': 1, 'modified_at': '2025-04-09T10:02:58.764140+00:00', 'options': {'host': '<MASKED>', 'ignore_errors': False, 'name': 'tibber', 'node_num': 1, 'password': '<MASKED>', 'scan_interval': 2}, 'pref_disable_new_entities': False, 'pref_disable_polling': False, 'source': 'user', 'subentries': [], 'title': 'tibber', 'unique_id': None, 'version': 1} 2025-04-09 12:03:00.768 INFO (MainThread) [custom_components.tibber_local] restarting TibberLocalBridge integration... for host: '192.168.178.5' node: '1' com_mode: '3' with options: {'ignore_parse_errors': False} 2025-04-09 12:03:00.828 INFO (MainThread) [custom_components.tibber_local] after init - found OBIS entries: '{'010060320101': <obis: 010060320101, value: SAG>, '0100600100ff': <obis: 0100600100ff, value: 0a01534147200153365f>, '0100010800ff': <obis: 0100010800ff, status: 1853700, val_time: 47345328, unit: 30, scaler: -1, value: 9500526>, '0100010801ff': <obis: 0100010801ff, val_time: 47345328, unit: 30, scaler: -1, value: 6120735>, '0100010802ff': <obis: 0100010802ff, val_time: 47345328, unit: 30, scaler: -1, value: 3379791>, '0100020800ff': <obis: 0100020800ff, val_time: 47345328, unit: 30, scaler: -1, value: 7922250>, '0100020801ff': <obis: 0100020801ff, val_time: 47345328, unit: 30, scaler: -1, value: 6487168>, '0100020802ff': <obis: 0100020802ff, val_time: 47345328, unit: 30, scaler: -1, value: 1435082>, '0100100700ff': <obis: 0100100700ff, unit: 27, scaler: 0, value: -294>}' 2025-04-09 12:03:00.829 INFO (MainThread) [custom_components.tibber_local.sensor] available sensors found: dict_keys(['010060320101', '0100600100ff', '0100010800ff', '0100010801ff', '0100010802ff', '0100020800ff', '0100020801ff', '0100020802ff', '0100100700ff']) 2025-04-09 12:03:02.945 DEBUG (MainThread) [custom_components.tibber_local] Finished fetching tibber_local data in 0.072 seconds (success: True) 2025-04-09 12:03:05.000 DEBUG (MainThread) [custom_components.tibber_local] Finished fetching tibber_local data in 0.127 seconds (success: True) 2025-04-09 12:03:06.942 DEBUG (MainThread) [custom_components.tibber_local] Finished fetching tibber_local data in 0.068 seconds (success: True)

I will leave the DEBUG mode on. I guess the problem will happen and hopefully I have more relevant information on the logs.

[marq24]

so after a longer observation - did something new appeared in the logs...

One thing you can try is to slightly rotate your reading head anti.clock wise - in order to try to get rid of the CRC error(s)