Adds YT video

Author: mattpopovich

_posts/2025-11-15-how-to-replace-and-fix-tesla-model-3-window-regulator-motor.md

@@ -22,7 +22,7 @@ image:
 description: A detailed guide of how I replaced the window regulator motor in my 2020 Tesla Model 3              # A short sentence to describe the article, used when sharing links on social media and on homepage
 ---
 
-<!-- TODO: Add YT link here -->
+{% include embed/youtube.html id='IvClgcD-U5Y' %}
 
 ## [TL;DR](https://www.merriam-webster.com/dictionary/TL%3BDR)
 1. [Remove window regulator motor](https://service.tesla.com/docs/Model3/ServiceManual/en-us/GUID-1F4A72C4-BFEB-410B-BB8C-CDEAA02CC36A.html)
@@ -101,8 +101,9 @@ Okay, enough chit chat, let’s get our hands dirty.
     * Remove 13x 8mm screws around the outside of the black plastic panel to remove the assembly.
       * Do not remove the four screws on the inside.
         * They are a different size so hopefully they aren’t tempting.
-    * Once the screws are out, there are two metal clips holding the assembly to the door. The repair manual only mentions one and it is wrong. There’s a clip on the bottom left and the bottom right.
-      * To lift the assembly out, pull it away from the bottom, then slide the assembly down.
+    * Once the screws are out, there are two metal clips holding the assembly to the door. The repair manual only mentions one so maybe newer models only have one but for me, there’s a clip on the bottom left and the bottom right.
+      * These clips take a good bit of force to disconnect.
+    * To lift the assembly out, pull it away from the bottom, then slide the assembly down.
 
 Boom! The assembly is out and ready to be replaced or repaired.