Set BOOT_WORKAROUND to OFF

Disable the BOOT_WORKAROUND setting for rp2040.

Author: meltman

rp2040/CMakeLists.txt

@@ -4,7 +4,7 @@ set(CMAKE_SYSTEM_NAME Generic)
 # Some boards, such as the first Adafruit revisions, may have trouble booting properly
 # due to bad componets used in the design.
 # Turn this setting to ON if your rp2040 is not detected after firmware upload and reset
-set(BOOT_WORKAROUND ON)
+set(BOOT_WORKAROUND OFF)
 
 # Default output data pin for the non-SPI LED strips (only for sk6812/ws2812b)
 set(OUTPUT_DATA_PIN 14)