NVIDIA® Jetson Thor™

[MeliTaliani]

Description	Field
Datasheet component	\iiticubstor01.iit.local\icub-tech\mechatronics\Datasheet\Boards\NVIDIA\Jetson_Thor.pdf
Project	Study-r1-ergomorphing
Alias Creo	NVIDIA_JETSON_THOR_T5000
IIT-Code	19016
Applicant	Melissa Taliani, @MeliTaliani
Supervisor	Nicolò Genesio, @Nicogene
Maintainer	Marcello Savoldi, @marcellosavoldi
Coworkers	@icub-tech-iit/silo-mech

Attachment:

### Notes:

Checklist:

Complete the checklist in order to proceed with the request.

• Created the Alias following the standard convention.
• Added, if necessary, the source files (STEP, IGS, etc), the links/datasheets/drawings or other information used to create the library part.
• File imported using the Creo start part commercial.
• Checked mass properties.
• Checked if one special case applies to this component.
• Converted the files with the EDU-COM license.
• Created IIT code in WINGST with manufacturer and at least one supplier.

[MeliTaliani]

The Creo file has been created. Mass has to be checked ones the component arrives.

[MeliTaliani]

WinGST code created.

[Lawproto]

Actually, I discovered the NVIDIA Jetson Thor module was purchased from Connect Tech already assembled with:

• The carrier board.
• The Intel module AX210NGW.
• Its heatsink.
• A SSD drive.
• A bunch of M3x28 standoffs and related screws.

I will find what it the most suitable way of dealing with this in the CAD.

[Lawproto]

Big beastie.