|
2 | 2 | title: Supported Hardware |
3 | 3 | --- |
4 | 4 |
|
5 | | -This page lists the hardware that micro-ROS currently supports, and also accessories that we frequently refer to, such as add-on boards, and JTAG probes. |
| 5 | +This page lists the hardware platforms that we use to test and develop micro-ROS, and also accessories that we frequently refer to, such as add-on boards, and JTAG probes. |
6 | 6 |
|
7 | | -## Evaluation Boards |
| 7 | +## Reference Platforms {#evaluation-boards} |
8 | 8 |
|
9 | | -### Olimex STM32-E407 |
| 9 | +Even that micro-ROS technology can be ported to many targets, we have decided to select development platforms to support them. This page describes the main characteristic of those boards. |
10 | 10 |
|
11 | | -This is a fairly bare-bones evaluation board with an STM32F407ZGT6 microcontroller. |
| 11 | +## Olimex LTD STM32-E407 |
12 | 12 |
|
13 | | -## Development Tools |
| 13 | + |
14 | 14 |
|
15 | | -### Olimex ARM-USB-OCD-H JTAG probe |
| 15 | +The [Olimex LTD STM32-E407](https://www.olimex.com/Products/ARM/ST/STM32-E407/open-source-hardware) is an open-hardware low-cost entry board for developing custom applications with the STM32F407ZGT6 Cortex-M4F microcontrollers from STMicroelectronics. |
16 | 16 |
|
17 | | -This is a JTAG probe with a USB and RS232 port that can also power the board. It looks as follows: |
18 | | - |
| 17 | +It contains 196KB of RAM and 1MB of Flash. It is a very complete board thanks to the wide variety of communication interfaces it offers: USB OTG, Ethernet, SD Card slot, SPI, CAN or I2C buses are exposed. The board contains various expansion options available: Arduino-like headers for attaching daughter boards, many pins exposed, as well as a UEXT connector. This connector is a custom pin-out bus and is used to attach sensor breakouts sensors that manufacturer sells. |
19 | 18 |
|
20 | | -See the [Olimex product page for ARM-USB-OCD-H](https://www.olimex.com/Products/ARM/JTAG/ARM-USB-OCD-H/) for details. |
| 19 | +### Development tools |
| 20 | + |
| 21 | +In order to flash and debug the board, it is required to get a JTAG probe. We recommend getting on of the next JTAG probes: |
| 22 | + |
| 23 | ++ [ARM-USB-OCD-H](https://www.olimex.com/Products/ARM/JTAG/ARM-USB-OCD-H/) |
| 24 | ++ [ARM-USB-TINY-H](https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H/) |
| 25 | + |
| 26 | +### Resources |
| 27 | + |
| 28 | ++ [Vendor main page](https://www.olimex.com/Products/ARM/ST/STM32-E407/open-source-hardware) |
| 29 | ++ [Schematics in PDF](https://github.com/OLIMEX/STM32F4/blob/master/HARDWARE/STM32-E407/STM32-E407_Rev_F.pdf) |
| 30 | ++ [CAD files](https://github.com/OLIMEX/STM32F4) |
| 31 | ++ [User Manual](https://www.olimex.com/Products/ARM/ST/STM32-E407/resources/STM32-E407.pdf) |
| 32 | + |
| 33 | +## STM32L1 Discovery |
| 34 | + |
| 35 | + |
| 36 | + |
| 37 | +The (STM32L1 Discovery Kit)[https://www.st.com/en/evaluation-tools/32l152cdiscovery.html] is an open hardware design, ultra low power and low-cost entry board for developing custom applications. It contains an STM32L152RCT6 Cortex-M3 microcontroller manufactured by ST Microelectronics. This part number contains 32KB of RAM and 256KB of flash memory. It also includes an ST-Link in-circuit debugger that allows flashing and debugging the target microcontroller. |
| 38 | + |
| 39 | +### Resources |
| 40 | + |
| 41 | ++ [Vendor main page](https://www.st.com/en/evaluation-tools/32l152cdiscovery.html) |
| 42 | ++ [User Manual](https://www.st.com/content/ccc/resource/technical/document/user_manual/08/f8/63/f5/7b/3d/40/ff/DM00027954.pdf/files/DM00027954.pdf/jcr:content/translations/en.DM00027954.pdf) |
| 43 | ++ [Schematics in PDF](https://www.st.com/resource/en/schematic_pack/32l152cdiscovery_sch.zip) |
| 44 | ++ [Bill of Material](https://www.st.com/resource/en/bill_of_materials/32l152cdiscovery_bom.zip) |
| 45 | ++ [Gerber files](https://www.st.com/resource/en/bill_of_materials/32l152cdiscovery_bom.zip) |
0 commit comments