FRDM-K20D50M: Upload doesn't work, but Pio debug works

[smile5]

Hello
I have trouble with upload. Debug work fine, but when I upload, platformio tell me is ok, but firmware doesn't launch after jlink reset the board.

 Downloading file [.pio/build/frdm_k20d50m/firmware.bin]...
Comparing flash   [100%] Done.
Erasing flash     [100%] Done.
Programming flash [100%] Done.
Verifying flash   [100%] Done.
J-Link: Flash download: Bank 0 @ 0x00000000: 2 ranges affected (32768 bytes)
J-Link: Flash download: Total time needed: 1.165s (Prepare: 0.041s, Compare: 0.034s, Erase: 0.221s, Program: 0.857s, Verify: 0.003s, Restore: 0.006s)
O.K.

Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.
Reset: Halt core after reset via DEMCR.VC_CORERESET.
Reset: Reset device via AIRCR.SYSRESETREQ.
AfterResetTarget()


Script processing completed.

====== [SUCCESS] Took 23.15 seconds ======================

Terminal will be reused by tasks, press any key to close it.

here is my platformio.ini

;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:frdm_k20d50m]
platform = freescalekinetis
board = frdm_k20d50m
framework = mbed
debug_tool = jlink
; SWD interface

upload_protocol = jlink

; JTAG interface
;upload_protocol = cmsis-dap

with kinetis studio, no trouble.

Thanks a lot

[valeros]

Could you please try to compile and upload using the following config:

[env:frdm_k20d50m]
platform = freescalekinetis
board = frdm_k20d50m
build_type = debug
framework = mbed
debug_tool = jlink
upload_protocol = jlink

[smile5]

The same result, code il not executing.

On the board, the blue led is On. The code i compile is the blinking example.

[smile5]

It's a trouble with the bin files. Using JFlashLite.exe or JLink give the same result blue led on, and no blink.

[sidgwick]

build_type = debug

add this line to my platformio.ini works for me, what happend to the result binary without that line?