Revise PSPLINK setup instructions for Windows and WSL

Updated instructions for setting up PSPLINK on Windows to include WSL steps and clarified the process for native Windows setup.

Author: z2442

psplink/windows.md

@@ -4,7 +4,31 @@ layout: home
 nav_exclude: true
 ---
 
-# Setting up PSPLINK on Windows
+# Setting up PSPLINK on WSL 
+{: .fs-8 .fw-700 .text-center }
+
+On Windows a driver needs to be installed before PSPLINK can be used. To do this take the following steps:
+
+1. Make sure the programs `usbhostfs_pc` and `pspsh` are available in cmd. Otherwise download them [here](https://github.com/pspdev/psplinkusb/releases/download/latest/pspsh-windows.zip).
+2. Start PSPLINK on the Playstation Portable and connect it to the computer through USB.
+3. Download [Zadig](https://zadig.akeo.ie/) and start it. It will ask if you want to run it as administrator, click yes.
+4. In Zadig, click on `options` -> `List All Devices`.
+5. Select the entry `"PSP" type B` from the dropdown list.
+6. Left of driver, select the `libusb-win32` driver. Then click install.
+7. Wait for the installation to finish, then disconnect the USB cable from the PSP.
+8. Open a Powershell window as Administrator.
+9. Run the following commands.
+10. "usbipd list" and find the BUSID of you `"PSP" type B`.
+11. usbipd bind --busid YOURBUSID
+12. usbipd attach --wsl --busid YOURBUSID -a 
+This command connects your usb device to WSL and the -a forces it to rebind after resets. 
+Note: Steps 10,11 and 12 will need to be run each time you want to use psplink within WSL.
+
+    
+
+
+
+# Setting up PSPLINK on Native Windows
 {: .fs-8 .fw-700 .text-center }
 
 On Windows a driver needs to be installed before PSPLINK can be used. To do this take the following steps: