Skip to content

goip.md

Latest commit

 

History

History
36 lines (28 loc) · 1.58 KB

goip.md

File metadata and controls

36 lines (28 loc) · 1.58 KB
Raw

GoIP.de

Configuration

Example

{
  "settings": [
    {
      "provider": "goip",
      "domain": "sub.mydomain.goip.de",
      "username": "username",
      "password": "password",
      "ip_version": "",
      "ipv6_suffix": ""

    }
  ]
}

Compulsory parameters

  • "domain" is the domain to update. For example, for the owner/host sub, it would be sub.goip.de. The eTLD must be goip.de or goip.it.
  • "domain" is the domain to update. The eTLD must be goip.de or goip.it. For example:
    • for the root owner/host @, it would be mydomain.goip.de
    • for the owner/host sub, it would be sub.mydomain.goip.de
    • for multiple domains, it can be sub1.mydomain.goip.de,sub2.mydomain.goip.de BUT it cannot be a.goip.de,b.goip.de, since the effective domains would be a.goip.de and b.goip.de
  • "username" is your goip.de username listed under "Routers"
  • "password" is your router account password

Optional parameters

  • "ip_version" can be ipv4 (A records), or ipv6 (AAAA records) or ipv4 or ipv6 (update one of the two, depending on the public ip found). It defaults to ipv4.
  • "ipv6_suffix" is the IPv6 interface identifier suffix to use. It can be for example 0:0:0:0:72ad:8fbb:a54e:bedd/64. If left empty, it defaults to no suffix and the raw temporary IPv6 address of the machine is used in the record updating. You might want to set this to use your permanent IPv6 address instead of your temporary IPv6 address.