Feature Request: Clean up of Telemetry Page

[Allister779]

In the pilot view there is a lot of repeated data. For example:

• Arm/diarm status is shown in 3 places.
• Flight mode is shown in 2 places .... nope, 3, just saw another.
• There are two buttons that will arm the drone.

I understand that this page is customizable, but many of the features overlap and their features aren't individually customizable. And on smaller laptop screens all these bits of real-estate are at a premium.

In the Flight Control Panel I would remove the Arm Status, Flight Mode status, and Arm button as those are all repeated.

[rubenCodeforges]

Thanks.

[seeul8er]

I would also like to see the telemetry RSSI status, packet loss, noise floor etc. The values come with a RADIO_STATUS message. Some might have only a telemetry radio connected and no RC. This is possible in QGC but I have not seen it here so far.

BTW.
Amazing project 💯

[rubenCodeforges]

@Allister779 try RC4 , you have now instruments , split views and many other goodies , you may even not need all the panels now and there are variations of instruments.