Merge pull request #24 from selfcustody/develop

Develop

Author: odudex

projects/maixpy_amigo/compile/overrides/components/micropython/port/src/omv/img/font.c

@@ -0,0 +1,32 @@
+cmake_minimum_required(VERSION 3.9)
+
+
+# Get SDK path
+if(NOT SDK_PATH)
+    get_filename_component(SDK_PATH ../../ ABSOLUTE)
+    if(EXISTS $ENV{MY_SDK_PATH})
+        set(SDK_PATH $ENV{MY_SDK_PATH})
+    endif()
+endif()
+
+# Check SDK Path
+if(NOT EXISTS ${SDK_PATH})
+    message(FATAL_ERROR "SDK path Error, Please set SDK_PATH or MY_SDK_PATH variable")
+endif()
+
+# Get Toolchain path
+if(NOT CONFIG_TOOLCHAIN_PATH)
+    if(EXISTS $ENV{MY_TOOLCHAIN_PATH})
+        set(CONFIG_TOOLCHAIN_PATH $ENV{MY_TOOLCHAIN_PATH})
+    endif()
+endif()
+
+# Call compile
+include(${SDK_PATH}/tools/cmake/compile.cmake)
+
+
+# Project Name
+project(maixpy)
+
+
+

projects/maixpy_bit/compile/overrides/components/micropython/port/src/omv/img/font.c

@@ -0,0 +1,55 @@
+try:
+    import ujson as json
+except ImportError:
+    import json
+
+# todo: serial console not fully functioning for debugging and/or repl
+# yahboom_devkit pretends to be "yahboom" so that krux code can enable common features
+config = json.loads("""
+{
+    "type": "yahboom",
+    "lcd": {
+        "dcx": 38,
+        "ss": 36,
+        "rst": 37,
+        "clk": 39,
+        "height": 240,
+        "width": 320,
+        "invert": 1,
+        "dir": 96,
+        "lcd_type": 0
+    },
+    "sdcard": {
+        "sclk": 27,
+        "mosi": 28,
+        "miso": 26,
+        "cs": 29
+    },
+    "board_info": {
+        "BOOT_KEY": 16,
+        "CONNEXT_A": 4,
+        "CONNEXT_B": 5,
+        "I2C_SDA": 10,
+        "I2C_SCL": 9,
+        "SPI_SCLK": 27,
+        "SPI_MOSI": 28,
+        "SPI_MISO": 26,
+        "SPI_CS": 29
+    },
+    "krux": {
+        "pins": {
+            "BUTTON_A": 2,
+            "BUTTON_B": 3,
+            "BUTTON_C": 1,
+            "TOUCH_IRQ": 12,
+            "I2C_SDA": 10,
+            "I2C_SCL": 9
+        },
+        "display": {
+            "touch": true,
+            "font": [8, 16],
+            "font_wide": [16, 16]
+        }
+    }
+}
+""")

projects/maixpy_cube/compile/overrides/components/micropython/port/src/omv/img/font.c

@@ -0,0 +1,36 @@
+from Maix import FPIOA
+
+class fm:
+  fpioa = FPIOA()
+
+  def help():
+    __class__.fpioa.help()
+
+  def get_pin_by_function(function):
+    return __class__.fpioa.get_Pin_num(function)
+
+  def register(pin, function, force=True):
+    pin_used = __class__.get_pin_by_function(function)
+    if pin_used == pin:
+      return 
+    if None != pin_used:
+      info = "[Warning] function is used by %s(pin:%d)" % (
+          fm.str_function(function), pin_used)
+      if force == False:
+        raise Exception(info)
+      else:
+        print(info)
+    __class__.fpioa.set_function(pin, function)
+
+  def unregister(pin):
+    __class__.fpioa.set_function(pin, fm.fpioa.RESV0)
+
+  def str_function(function):
+    if fm.fpioa.GPIOHS0 <= function and function <= fm.fpioa.GPIO7:
+      if fm.fpioa.GPIO0 <= function:
+        return 'fm.fpioa.GPIO%d' % (function - fm.fpioa.GPIO0)
+      return 'fm.fpioa.GPIOHS%d' % (function - fm.fpioa.GPIOHS0)
+    return 'unknown'
+
+  def get_gpio_used():
+    return [(__class__.str_function(f), __class__.get_pin_by_function(f)) for f in range(fm.fpioa.GPIOHS0, fm.fpioa.GPIO7 + 1)]