From 676b72100271707befd531c88d66f47a8ece2b96 Mon Sep 17 00:00:00 2001 From: Owen McGirr Date: Tue, 15 Sep 2026 08:52:53 +0100 Subject: [PATCH] docs: note Remote's hold-to-stop still caps remote holds Co-Authored-By: Claude Fable 5.1 --- docs/point-scan.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/point-scan.md b/docs/point-scan.md index a52631b..524faaf 100644 --- a/docs/point-scan.md +++ b/docs/point-scan.md @@ -54,6 +54,6 @@ The action menu uses a fixed grid of square icon tiles with labels beneath the a Select **Switchify scanning** on Switchify Remote's Android Forwarding screen. Remote switches live in the same list as keyboard switches under PC Settings → Switches: Add remote switch takes the next free number, and the number can be changed in the editor. Numbers match the switches shown on the Forwarding screen, up to eight. Defaults are Select, Next, Previous, Pause/resume, Reverse and Stop in switches one to six. Remote switches can be named and use the PC scan mode, colour, movement and hold timing; keyboard assignments are separate. Manual mode requires connected switches covering Select, Next and Previous. -Start forwarding, then press Select to begin. Local switch keys are inactive during the remote session; PC Escape remains an emergency stop. The PC owns hold timing: hold actions work exactly as for keyboard switches, and holding a remote switch past the emergency limit resets the scan without ending the session. Edits to remote switches, shared scanner settings or hold timing apply to a live session on the next press; a change that leaves the current mode without its required actions ends the session. The PC no longer rejects a stale profile revision, so Remote only needs to reload profiles to refresh its labels. +Start forwarding, then press Select to begin. Local switch keys are inactive during the remote session; PC Escape remains an emergency stop. The PC owns hold-action timing: hold actions work exactly as for keyboard switches, and holding a remote switch past the PC emergency limit resets the scan without ending the session. Remote's own Forwarding hold-to-stop (3, 5 or 8 seconds, set on the phone) still ends the session without selecting, so keep hold lists short enough to finish inside it. Edits to remote switches, shared scanner settings or hold timing apply to a live session on the next press; a change that leaves the current mode without its required actions ends the session. The PC no longer rejects a stale profile revision, so Remote only needs to reload profiles to refresh its labels. Cancelled edges, missing edges and sync mismatches never select. Held-state mismatches cancel the gesture and require neutral input. Sessions expire after five seconds without an authenticated edge or sync. Disconnects and safety stops discard the point and release drag buttons; start explicitly again. Ordinary forwarding and remote scanning cannot own input simultaneously. Local scanning resumes after Remote disconnects.