I am stuck pls help

[woudenbe]

I ordered a package from Justin, the esp comes flashed. I powered to esp with usb and can connect to layzspa wifi access point.

Now the issue is I am only getting 404 error when trying to access on 192.168.4.2 IP

Somehow I think filesytem is missing but no clue how I can check this or how to install.

I have installed visual studio but in platformio I don't see the option (Platform)

[woudenbe]

Hi All,

In the mean time i managed to ADD the platforms.
but one issue appeared:
when selecting "Build File System" there is an error, that the JSON is broken ....

the json i think is part of the guthub files...

Anybody knows how to proceed ?

thanks for the help
hans

[visualapproach]

Open the "code" folder from platformio. Then press the arrow button at the bottom to upload firmware. You will after the fw also get a question if you want to upload the filesystem. Press 'Y' and enter.

[woudenbe]

thanks but nit working
when pressing build:

• Executing task in folder Code: C:\Users\admin.platformio\penv\Scripts\platformio.exe run --environment nodemcuv2

Processing nodemcuv2 (platform: https://github.com/platformio/platform-espressif8266.git; board: nodemcuv2; framework: arduino)

InvalidJSONFile: Could not load broken JSON: C:\Users\admin\Downloads\WiFi-remote-for-Bestway-Lay-Z-SPA-master\WiFi-remote-for-Bestway-Lay-Z-SPA-master\Code.pio\libdeps\nodemcuv2\EspSoftwareSerial.piopm

• The terminal process "C:\Users\admin.platformio\penv\Scripts\platformio.exe 'run', '--environment', 'nodemcuv2'" terminated with exit code: 1.
• Terminal will be reused by tasks, press any key to close it.

when pressing upload the same:

• Executing task in folder Code: C:\Users\admin.platformio\penv\Scripts\platformio.exe run --target upload --environmentnodemcuv2

Processing nodemcuv2 (platform: https://github.com/platformio/platform-espressif8266.git; board: nodemcuv2; framework: arduino)

InvalidJSONFile: Could not load broken JSON: C:\Users\admin\Downloads\WiFi-remote-for-Bestway-Lay-Z-SPA-master\WiFi-remote-for-Bestway-Lay-Z-SPA-master\Code.pio\libdeps\nodemcuv2\EspSoftwareSerial.piopm

• The terminal process "C:\Users\admin.platformio\penv\Scripts\platformio.exe 'run', '--target', 'upload', '--environment', 'nodemcuv2'" terminated with exit code: 1.
• Terminal will be reused by tasks, press any key to close it.

[woudenbe]

Issue resolved, after downloading the files from github again, it is working now

[visualapproach]

Splendid